What is the size of wheel bolts?

1 Answers
DelValentina
07/30/25 1:20am
Different vehicle models use different wheel bolts, but common specifications include 17mm, 19mm, 21mm, and 22mm. Here are some relevant details: Wheels are secured by bolts, with variations in both the number of bolts used to fix the wheel and their specifications across different vehicles. Additional information about wheel bolts includes: 1. When tightening wheel bolts, always follow the specified sequence and torque. 2. Some high-end vehicles use aluminum wheel bolts, which should never be tightened with an impact wrench as this can cause them to break. 3. Wheel bolts only need to be removed and installed when replacing a spare tire or all four tires.
Was this review help?
10
2
Share
More Forum Discussions

What are the steps for replacing a car battery?

Car battery replacement steps are as follows: 1. Confirm the battery installation location. Most models are installed in the engine compartment or luggage compartment, while some models may have it in the cabin. Take appropriate body protection measures at the corresponding position. 2. Remove external protective devices such as the battery cover and measure the voltage between the two terminals with a multimeter. 3. If the vehicle has an anti-theft system (including audio anti-theft), you can first connect an external power source or parallel a fully charged battery. Note: connect the positive terminal first, then the negative. The positive terminal of the external power source can be directly connected to the battery's positive terminal post, but the negative should not be directly connected to the battery's negative terminal post. Instead, it should be connected to the vehicle's ground point. 4. Turn off the ignition switch of the faulty vehicle. First disconnect the negative cable of the battery, then disconnect the positive cable. 5. Remove the battery's fixing device and take out the battery.
12
0
Share

What to Do When Windshield Washer Fluid is Low?

When the windshield washer fluid is low, you can choose to buy and refill it yourself or go to a 4S shop or repair shop for assistance. Do not directly add water, as this can damage the wipers and windshield. When refilling the cleaning fluid yourself, make sure to use the appropriate windshield washer fluid. If it is a highly concentrated solution, dilute it with water according to the instructions and avoid overfilling. Notes: Windshield washer fluid is a consumable item in car usage. When driving in dusty environments or on highways during rainy days, the fluid can deplete very quickly. It is best to perform regular checks and always keep spare fluid in the car for easy refilling when needed. When refilling the fluid yourself, ensure to use the appropriate windshield washer fluid. If it is a highly concentrated solution, dilute it with water according to the instructions and avoid overfilling. Functions: It can eliminate static electricity on the glass surface and prevent the formation of fog droplets, ensuring clear visibility through the windshield. It also reduces friction between the wipers and glass, preventing scratches, and provides cleaning, decontamination, and antifreeze effects. Windshield washer fluid typically has wetting, penetrating, and solubilizing functions, aiding in cleaning and removing dirt.
16
4
Share

How many cylinders does the Lingpai 1.8L have?

The Honda Lingpai 1.8L is equipped with a four-cylinder engine. This model features a 1.8L naturally aspirated engine with a maximum power output of 100kW and a maximum torque of 169Nm. Below is some relevant information about the Honda Lingpai: 1. The model equipped with the 1.8L naturally aspirated engine is the 2017 version, which was discontinued by 2020. The 2020 models available for sale are equipped with a 1.0T turbocharged engine. 2. The Honda Lingpai is a compact car launched by GAC Honda. The latest models are equipped with a three-cylinder engine, while the 1.8L naturally aspirated engine models feature a four-cylinder engine. 3. Compared to four-cylinder engines, three-cylinder engines have one less cylinder, resulting in a reduction in engine displacement. With the introduction of vehicle emission standards, some manufacturers have launched models with three-cylinder engines. These small-displacement turbocharged engines not only help save fuel consumption but also regulate pollutant emissions.
12
0
Share

How to Deal with Abnormal Noise When Car Window Rolls Up/Down?

Car window rolling up/down with abnormal noise may be caused by the following reasons: 1. Loose fastening screws inside the window glass or loosened lifter bracket; 2. Aging sealing rubber strip of the window glass; 3. Presence of debris in the window glass guide rail. Solutions for car window rolling up/down with abnormal noise are as follows: 1. Tighten the loose door glass at a professional repair shop; 2. Replace the sealing rubber strip of the window glass; 3. Clean debris in the guide rail. Car windows are an important part of the entire vehicle body, designed to meet the needs of interior lighting, ventilation, and visibility for drivers and passengers, including front/rear windshields, ventilation windows, heat-insulating side windows, and sunroofs.
3
3
Share

How to Identify Piston Slap?

Methods to identify piston slap are as follows: 1. At low speed, conduct a cylinder cut-off test for each cylinder. If the knocking sound reduces or disappears after cutting off, it indicates that cylinder is the source. 2. At idle speed, the piston slap is obvious and clear. As the engine temperature rises or the speed exceeds medium speed, the knocking sound weakens or disappears. 3. Remove the spark plug and inject a small amount of thick lubricating oil into the cylinder through the spark plug hole. After adding the lubricating oil, use the starter to rotate the crankshaft several times to fill the gap between the piston and cylinder wall with an oil film, then start the engine. If the knocking sound significantly weakens or disappears immediately after starting, but quickly reappears as the oil film is lost or burned, it confirms that cylinder is the source. 4. Use a long-handled screwdriver to touch the side of the engine block and listen for the sound. If the knocking sound is obvious and slightly vibrates, it confirms that cylinder is the source.
7
3
Share

Where is the oil flow check valve located on the Cruze?

The engine oil check valve on the Cruze is located behind the car's alternator. Here is some relevant information about the Cruze: 1. The Cruze is a compact sedan produced by SAIC-GM Chevrolet. As of July 2019, the models available on the market are the 2018 versions. 2. In terms of body structure, the Cruze includes both sedan and hatchback versions. The sedan version has body dimensions of 4666*1807*1460mm, while the hatchback version measures 4450*1807*1459mm. 3. In terms of powertrain, the Cruze offers two engine options: a 1.5L naturally aspirated engine and a 1.4L turbocharged engine. The 1.5L version delivers a maximum horsepower of 114hp, maximum power of 84kw, maximum torque of 146N-m, with a MIIT comprehensive fuel consumption of 5.9L/100km. The 1.4L version provides a maximum horsepower of 150hp, maximum power of 110kw, maximum torque of 240N-m, with a MIIT comprehensive fuel consumption of 5.7L/100km.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.