What is the size of the wiper blades for the Nissan Sunny?

1 Answers
OliveAnn
07/29/25 6:25pm
Nissan Sunny dedicated car wiper blades are 22/16 inches. Wiper Introduction: The wiper is an important accessory installed on the windshield, used to remove rain, snow, and dust that obstruct the view on the windshield, playing a crucial role in driving safety. Wiper Maintenance Mode Operation Process: With the ignition switch in the off position, pull the wiper switch downward and hold it continuously. While keeping the wiper switch in the downward position, turn on the ignition switch without pressing the brake pedal, and both front and rear wipers will enter maintenance mode. After replacement, turn off the ignition switch again, and the wipers will return to their normal position.
Was this review help?
11
3
Share
More Forum Discussions

How to Use Navigation for Large Trucks?

First, open Baidu Maps and click the icon in the upper left corner; From the menu that appears, select Settings; In the Settings interface, find Navigation Settings; In Navigation Settings, you can turn on the traffic restriction switch and click on Traffic Restriction Rules; After exiting, you can enter the license plate number of the large truck, and the system will provide real-time navigation based on the city rules set.
13
1
Share

Does a Vehicle Consume Fuel in Idle State?

Vehicles do consume fuel in idle state, although the fuel consumption rate is relatively low, but it is not good for the engine. The idle state refers to a working condition when the engine is running without load. When the engine is operating, if the accelerator pedal is completely released, the engine enters the idle state. During idle speed adjustment, the RPM should not fluctuate abruptly, as this can cause premature wear to the engine. It is best to have the idle speed adjusted at an automotive repair facility. Idle speed refers to the engine running without any load, only overcoming the internal friction resistance of its components, without delivering any external power. The minimum RPM required to maintain stable engine operation is called the idle speed, which is one of the five basic operating conditions of an engine. For an engine with good working performance, the idle speed typically ranges from 550 to 800 RPM per minute.
3
3
Share

How Long Does It Take to Paint a Car?

Painting a car typically takes 1 to 4 days. If it's a spray paint job, it usually requires 1 to 2 days, while larger areas may take 3 to 4 days. The car's paint surface consists of four layers, from the inside out: the electrocoat layer, the primer layer, the basecoat (color layer), and the clearcoat layer. The clearcoat is the outermost layer, which protects the basecoat and enhances the gloss of the car's paint. Applying paint not only forms a protective film on the car's surface, making it less susceptible to corrosion and extending the vehicle's lifespan, but also provides an aesthetically pleasing appearance. Different car paints offer varying effects, and choosing different types or colors can showcase the car's unique personality. Therefore, car paint is crucial for the vehicle itself.
6
2
Share

How to Use the Hill Descent Control on the Grand Cherokee?

The driver needs to shift the transmission into first gear and lift the clutch pedal, maintaining the vehicle speed at a low range. If the slope is very steep, the ESP system and ABS system on the vehicle will engage, reducing the speed through high-frequency intermittent braking.
20
1
Share

How to distinguish the front and back of the SAIC Maxus V80 clutch plate?

The side with the protrusion on the SAIC Maxus V80 clutch plate is the front side, and the side without the protrusion is the back side. The side with letter markings on the clutch plate is the front side, and the side without markings is the back side.
9
3
Share

How to Locate a Heavy Truck on a Mobile Phone?

Open WeChat, click on "My Location," and first check if the device appearance is in good condition and if all relevant accessories are complete; Purchase a suitable SIM card and insert it; Use a multimeter to identify the positive and negative power lines of the battery; Connect the red wire (positive) of the GPS locator's power line to the positive terminal of the truck's battery; Download the corresponding mobile app, log in to the vehicle management platform, and perform the necessary settings and functional operations.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.