What is the size of the Volkswagen CC's tires?

Basic Structural Composition of New Energy Vehicle Charging System?

New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new onboard power devices), integrating advanced technologies in vehicle power control and driving, resulting in vehicles with advanced technical principles, new technologies, and new structures. New energy vehicles include hybrid vehicles, pure electric vehicles (BEVs, including solar-powered vehicles), fuel cell electric vehicles (FCEVs), hydrogen engine vehicles, and other new energy vehicles (such as high-efficiency energy storage devices and dimethyl ether). Examples include Changan's hybrid MPV "Jiexun," SAIC's independently developed hybrid sedan based on the Roewe 750 platform, and Haima's pure electric concept car H12. There are also some emerging domestic brands in the sedan sector, such as the BYD F6 dual-mode electric vehicle and the Lifan New 520 equipped with an oil-electric hybrid system. Structural Composition: The vehicle charging system circuit consists of the power supply circuit, starting circuit, ignition circuit, lighting and signal device circuit, instrument information system circuit, auxiliary device circuit, and electronic control system circuit: 1. The power supply circuit, also known as the charging circuit, is composed of the battery, generator, regulator, and charging indicator device. Power distribution and circuit protection devices can also be included in this circuit. 2. The starting circuit consists of the starter, starting relay, starting switch, and starting protection circuit. Devices for preheating during low-temperature starts and their control circuits can also be included in this circuit. 3. The ignition circuit is unique to gasoline engine vehicles. It consists of the ignition coil, distributor, electronic ignition controller, spark plug, and ignition switch. Microcomputer-controlled electronic ignition systems are generally classified under the engine electronic control system. 4. The lighting and signal device circuit consists of headlights, fog lights, marker lights, turn signals, brake lights, reverse lights, interior lights, and related control relays and switches. 5. The instrument information system circuit consists of instruments, their sensors, various warning indicators, and controllers. 6. The auxiliary device circuit consists of various electrical devices installed to enhance vehicle safety and comfort. The types of auxiliary electrical devices vary depending on the vehicle model, with higher-end models featuring more advanced devices. Generally, these include windshield wipers and washers, windshield defrosters (anti-fog), air conditioning, audio systems, etc. More advanced models may also feature power windows, electronic door locks, power seat adjustments, and electric remote-controlled mirrors. Electronic control airbags are classified under the electronic control system. 7. The electronic control system mainly consists of the engine control system (including fuel injection, ignition, and emission control), automatic transmission and cruise control system, anti-lock braking system, airbag control system, etc.

13

5

Share

What does ECO on a car represent?

ECO stands for the car's economical driving mode. It is an English abbreviation derived from the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active Eco driving mode and non-active Eco driving mode. When the Eco indicator light on the dashboard illuminates, it indicates that the vehicle's economical mode has been activated. Eco mode can be categorized into active and non-active types. The difference lies in the fact that the active type has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the Eco mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. The non-active Eco mode does not have a dedicated button. When the Eco indicator light on the dashboard illuminates, it merely serves as a reminder function. The Eco system automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the Eco indicator light. Most cars adopt the active Eco driving mode, meaning they have their own switch button. Therefore, during daily driving, we can activate the Eco mode. However, it is unnecessary to enable Eco mode when driving at speeds exceeding 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of Eco mode but also impact the vehicle's power performance. Additionally, the Eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the car prioritizes speed, causing the Eco mode to automatically deactivate. During idle parking or when in N/P gear or manual mode, the Eco mode may also become ineffective. When a high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the Eco mode will not function in such scenarios.

5

4

Share

Why does the BYD F3 clutch pedal not return when pressed down?

BYD F3 clutch pedal not returning when pressed down may be due to the following reasons: 1. Air in the clutch hydraulic system: This causes excessive clutch travel and poor return. The method to diagnose this issue is simple—if you feel little resistance when pressing the clutch and the clutch travel is too large, this is likely the cause. 2. Dirty or contaminated clutch fluid: This leads to severe wear of the clutch master cylinder (piston) or blockage of the return port, preventing the clutch from returning. The diagnostic method is to check the color of the fluid in the clutch fluid reservoir by opening the engine hood.

5

Share

Must manual transmission downshift one gear at a time?

Downshifting multiple gears at once is a dangerous behavior and not recommended. Specific reasons: Manual transmission gear shifting involves controlling the movement of the synchronizer sleeve to engage with different gear teeth combinations. To ensure smooth engagement between the synchronizer sleeve and gear teeth, their speeds must be momentarily synchronized for seamless gear changes. Gear shifting: Gear shifting refers to the "gear lever operation method" where the driver performs various psychological and physiological movements to continuously adjust the gear lever position based on road conditions and vehicle speed changes.

3

Share

Will the transmission malfunction light come on if there is a problem with the transmission?

Transmission problems may cause the transmission malfunction light to illuminate. Possible causes: The transmission malfunction light may come on due to the following reasons: transmission valve body failure, insufficient transmission fluid, transmission computer program failure, or transmission wiring harness failure. Transmission: A device that changes the speed ratio and direction of motion. Used in automobiles, tractors, ships, machine tools, and various machines to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. Gear-driven transmissions generally consist of a housing and several gear pairs.

20

4

Share

Why does the Besturn B50's alarm horn keep sounding?

Besturn B50's alarm horn frequently sounding may be caused by the following reasons: 1. Horn relay sticking causing continuous horn sound: This fault is easy to identify. Just locate the horn relay and when the horn sounds, gently tap the relay with a screwdriver or other tool. If the horn stops, simply replace the relay. 2. Internal sticking or short circuit in the horn switch: This can cause the horn to sound continuously. For this fault, you need to disconnect the horn switch wires to check if the switch is the cause. If it's caused by wiring issues (such as the horn wire connecting to the live wire), it will also result in continuous sounding.

5

2

Share

What is the size of the Volkswagen CC's tires?

Basic Structural Composition of New Energy Vehicle Charging System?

What does ECO on a car represent?

Why does the BYD F3 clutch pedal not return when pressed down?

Must manual transmission downshift one gear at a time?

Will the transmission malfunction light come on if there is a problem with the transmission?

Why does the Besturn B50's alarm horn keep sounding?

How to distinguish between the big V and small V of the Reiz?

How to fold the mirrors on the Buick Excelle?

How many chances are there for each subject of the driving test?

What Causes the Tire Pressure Warning Light in the Buick Regal?