What is the size of the tire bolts on the Baojun 730?

1 Answers
LeJudah
07/29/25 8:23pm
The tire bolt size for the Baojun 730 is a 19-size nut, with a 12-mm bolt and a 21-mm nut. If you are unsure of the size, you can check it on the wrench included in the vehicle's toolkit. Baojun 730 Configuration: This automatic transmission can handle a maximum torque of 360Nm and is equipped with BorgWarner's pre-engagement technology paired with dual-clutch adaptive control, allowing for quick gear shifts in just 0.2 seconds. The powertrain still features the P-Tec DVVT 1.5T turbocharged engine, which delivers a maximum power of 150 horsepower (110 kW) at 5500 rpm and a peak torque of 230 Nm between 2000-3800 rpm. Baojun 730 Fuel Consumption: The hybrid version of the Baojun 730 has a combined fuel consumption of 6.7L per 100 km. The gasoline-powered 1.5T model has a combined fuel consumption of 7.0L per 100 km. Compared to the gasoline version, the hybrid model reduces fuel consumption by 0.3L per 100 km, offering better fuel efficiency.
Was this review help?
16
2
Share
More Forum Discussions

How Often Does the Luzun Need Maintenance?

The new Luzun vehicle requires its first maintenance within 6 months or 5,000 kilometers (whichever comes first), with the first service being free of charge. This includes changing the engine oil, oil filter, and transmission fluid, along with a comprehensive inspection of all vehicle components. Subsequent maintenance should be performed every 5,000 kilometers. Below is an introduction to the Luzun's maintenance schedule: 1. After driving 5,000 kilometers, the engine oil and oil filter need to be replaced; at 10,000 kilometers, replace the engine oil, oil filter, air filter, and fuel filter. 2. At 15,000 kilometers, replace the engine oil, oil filter, and cabin air filter; at 25,000 kilometers, replace the engine oil and oil filter. 3. At 20,000 kilometers, replace the engine oil, oil filter, air filter, and fuel filter; at 30,000 kilometers, replace the engine oil, oil filter, air filter, cabin air filter, and fuel filter. 4. At 35,000 kilometers, replace the engine oil and oil filter; at 40,000 kilometers, replace the engine oil, oil filter, air filter, fuel filter, brake fluid, and power steering fluid. 5. At 45,000 kilometers, replace the engine oil, oil filter, and cabin air filter; at 50,000 kilometers, replace the engine oil, oil filter, air filter, and fuel filter. 6. At 55,000 kilometers, replace the engine oil and oil filter; at 60,000 kilometers, replace the engine oil, oil filter, air filter, cabin air filter, and fuel filter. 7. The fuel filter and air filter should be replaced every 10,000 kilometers, and the cabin air filter should be replaced annually or approximately every 20,000 kilometers.
18
5
Share

What brand is the ltwoo transmission?

ltwoo transmission is a blueprint transmission, produced by Zhuhai Blueprint Controller Technology Co., Ltd. The relevant introduction is as follows: 1. Through continuous independent innovation, Blueprint has developed the AT1, AX, A7, A5, and A3 series of transmissions, with key products including 11-speed, 10-speed, 9-speed, 8-speed, 7-speed, and 6-speed kits. 2. Blueprint is dedicated to the research and production of mountain bike/civilian bicycle kits. Blueprint is gradually expanding its layout in high-end products and road bike products, focusing on Asian ergonomics during development to provide good feel and accuracy at a relatively low price.
19
5
Share

Principle of Silicone Oil Fan Clutch

The working principle of the silicone oil fan clutch is relatively simple. This type of clutch uses silicone oil as the medium. When the temperature is low, the silicone oil does not flow, and the fan clutch disengages. When the temperature is high, the viscosity of the silicone oil causes the fan clutch to engage, allowing the fan to rotate. Below is a related introduction to the silicone oil fan clutch: 1. When the engine load increases and the coolant temperature rises, the temperature of the airflow passing through the radiator core also increases. The high-temperature airflow blows on the bimetallic temperature sensor, causing the bimetallic strip to deform due to heat, which drives the valve plate transmission pin and control valve plate to deflect at an angle. 2. When the temperature of the airflow blowing on the bimetallic temperature sensor drops below 35°C due to reduced engine load or other reasons, the control valve plate closes the oil inlet hole, and silicone oil no longer enters the working chamber. The silicone oil originally in the working chamber continues to return to the oil storage chamber under centrifugal force until it is completely drained. At this point, the clutch is disengaged again, and the fan idles and slips.
9
0
Share

Why is there no environmental protection label after the vehicle inspection?

Environmental protection labels have been abolished, so there is no such label after the vehicle inspection. The details are as follows: 1. Introduction: According to the relevant regulations in the "Notice on Further Standardizing Emission Inspections and Strengthening Environmental Supervision and Management of Motor Vehicles" jointly issued by the Ministry of Public Security and the Ministry of Environmental Protection: Strictly implement the motor vehicle emission inspection system. Motor vehicle emission inspection agencies must strictly adhere to the emission inspection standards and upload the emission inspection data and electronic inspection reports to the environmental protection department, issuing a unified emission inspection report coded by the environmental protection department. 2. Explanation: The abolition of the motor vehicle environmental protection label does not mean that the periodic emission inspection results of motor vehicles are no longer valid. Motor vehicles must pass the emission inspection to obtain the safety inspection label. The new regulation essentially means that the environmental protection label and the safety inspection label have been merged into one.
14
4
Share

How to Deactivate a Car Anti-Theft System?

The steps to deactivate a car anti-theft system are as follows: 1. Locate the wiring distribution of the anti-theft system, which is usually found under the steering wheel or behind the A-pillar trim panel, then simply disconnect the input wire of the anti-theft device to deactivate it; 2. Some anti-theft devices have fuse protection, in which case you need to locate the corresponding fuse position and remove it to deactivate the car anti-theft system. A car anti-theft system is designed to prevent the theft of the vehicle itself or items inside the car. It consists of an electronically controlled remote or key, an electronic control circuit, an alarm device, and actuators.
8
5
Share

What to Do When the Low Coolant Temperature Warning Light Comes On?

Solutions for when the low coolant temperature warning light comes on are as follows: 1. Check if the coolant level in the auxiliary tank is too low: Open the engine hood and inspect the coolant level in the auxiliary tank. If the coolant level is below the MIN line, it indicates insufficient coolant, and you should add more. 2. Check if the cooling fan is constantly running; 3. Check if the thermostat is stuck open; 4. Check if the coolant temperature sensor is faulty: If the coolant level is adequate, the issue might be a faulty coolant temperature sensor. In this case, visit the nearest repair shop for maintenance or consider replacing the radiator.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.