What is the size of the sunroof on the Baojun 530?

1 Answers
LukeMarie
07/30/25 9:50am
The panoramic sunroof of the Baojun 530 is very large, with a length of 1250mm and a width of 650mm. The openable length reaches 420mm, and the sunroof area is approximately 0.8 square meters. It not only provides ventilation but also reduces the sense of confinement for rear passengers, making the rear cabin more spacious and bright. More details about the panoramic sunroof are as follows: 1. The panoramic sunroof is actually compared to a regular sunroof. Generally, panoramic sunroofs are larger in size, sometimes even covering the entire roof with a single piece of glass, allowing passengers to have an unobstructed view of the sky above. Currently, many panoramic sunroofs consist of two separate glass panels for the front and rear, giving both front and rear seats the experience of having a sunroof. 2. The panoramic sunroof does not fundamentally affect the safety of the vehicle body, making it a highlight in mid-to-high-end cars. However, due to its larger size, it imposes higher requirements on the vehicle's structure, the precision of stamped parts, and the manufacturing process of the body. 3. The advantages of a panoramic sunroof include: (1) Due to its larger area, it helps maintain fresher air inside the car and quickly removes odors compared to regular sedans; (2) Offers an excellent experience of looking up at the sky; (3) More effectively reduces interior noise at high speeds compared to side windows; (4) Can quickly lower the interior temperature, making it a great method for cooling down a car exposed to the sun.
Was this review help?
5
3
Share
More Forum Discussions

What to Do If a Car Battery Leaks?

Inspection and handling of car battery leakage: 1. Visual inspection: First conduct a visual inspection to locate the acid leakage area. Remove the cover plate to check for traces of acid leakage around the vent caps, then open the vent caps to observe if there is any flowing electrolyte inside the battery. 2. Air tightness test: Perform an air tightness test by placing the battery in water and inflating it under pressure, observing whether bubbles emerge from the battery. The presence of bubbles indicates acid leakage. 3. Charging observation: During the charging process, observe if any flowing electrolyte is generated. If found, it indicates a manufacturing defect. Any flowing electrolyte detected during charging should be completely drained.
5
1
Share

Should the clutch be depressed when starting a manual transmission car?

Starting a manual transmission car requires depressing both the clutch and the brake. Detailed explanations are as follows: 1. Benefits of depressing the clutch when starting: (1) Depressing the clutch pedal before starting the vehicle prevents the car from suddenly lurching forward if the gear is not in neutral, avoiding potential hazards. (2) Completely disconnects the load from the engine output, allowing the starter motor to operate with minimal load, which helps prolong its lifespan. 2. Additional information: Benefits of depressing the brake when starting: Prevents accidents caused by the car surging forward if you forget to depress the clutch when starting in gear. Depressing the brake when starting in gear can instantly restrain the engine and prevent accidents.
9
4
Share

What Causes the Throttle to Be Hard to Press?

There are several reasons why the throttle may be hard to press: 1. Severe carbon buildup in the engine's throttle body. 2. The throttle cable is broken. 3. The vehicle's throttle pedal is obstructed by floor mats or other objects. Before driving, it is essential to inspect the tires, brake pedal, throttle pedal, and clutch pedal to avoid malfunctions during operation. The reasons why a scooter frequently slows down and stalls are as follows: 1. Clogged fuel filter screen: Insufficient fuel supply when accelerating leads to stalling. After stopping, gasoline flows back into the float chamber, allowing the engine to restart. However, when accelerating again, the fuel level in the carburetor drops, and the main jet cannot draw fuel, causing another stall. 2. Clogged main jet in the carburetor: This may be due to dirty gasoline or fuel degradation from prolonged inactivity, forming deposits that block the main jet. 3. Engine overheating causing slight cylinder expansion: If the cylinder is expanded, it is necessary to visit a repair shop to replace the cylinder block, piston, and piston rings.
14
1
Share

What are the Principles and Structure of a Diesel Engine?

1. Working Principle of Diesel Engine: Most commonly used are four-cylinder, six-cylinder, and eight-cylinder engines. The working principle of a diesel engine is to compress the gas itself, rely on combustion to generate power, and drive the flywheel to rotate, storing energy for the next cycle of work. It produces a significant amount of exhaust pollution, which is why cars have switched to gasoline or even new energy sources to replace diesel. 2. Structure of Diesel Engine: The structure of a diesel engine can be divided into: the engine block, two major mechanisms, and four major systems. The engine block forms the framework of the diesel engine and consists of the cylinder block and the crankcase. The two major mechanisms are the crankshaft connecting rod mechanism and the valve train mechanism. The four major systems of a diesel engine are the fuel supply system, lubrication system, cooling system, and starting system. A diesel engine is a type of compression-ignition internal combustion engine.
7
1
Share

What are the effects of blocking the EGR in a diesel vehicle?

EGR long open state, at this time the vehicle will exhibit black smoke emission, lack of acceleration power, and increased fuel consumption. In this case, it is necessary to replace or clean the EGR valve. Below are specific details about the EGR valve: 1. Overview: The EGR valve is a mechatronic product installed on diesel engines to control the amount of exhaust gas recirculated back into the intake system. It is typically located on the right side of the intake manifold, near the throttle body, and is connected to the exhaust manifold via a short metal pipe. Its function is to regulate the amount of exhaust gas entering the intake manifold, allowing a certain amount of exhaust gas to flow into the intake manifold for recirculation. The EGR valve is a very important and critical component in the exhaust gas recirculation system. 2. Classification: EGR valves are divided into mechanical and electronic control types. 3. Working principle: The EGR valve guides the exhaust gas from engine combustion into the intake manifold to participate in combustion, thereby reducing the combustion chamber temperature, improving engine efficiency, enhancing the combustion environment, reducing engine load, effectively decreasing NOx emissions, reducing knocking, and extending the service life of various components.
2
0
Share

What Causes Water Dripping Under the Magotan Car?

Water dripping under the Magotan car may be caused by condensation from the air conditioning, a malfunction in the radiator cooling system, or dripping from the windshield. Below is an introduction to the Magotan: 1. Overview: The Volkswagen Magotan originates from the Future B6, which is closely related to the Passat B6. It is the first B-segment sedan to be produced and sold by FAW-Volkswagen since its establishment. According to FAW-Volkswagen, "Ma" symbolizes confidence, decisiveness, and dynamism, while "gotan" represents soaring, surpassing, and passion. 2. Features: The Magotan is equipped with a 1.8 TSI engine, the latest generation from Volkswagen Germany, which incorporates the most advanced engine technology globally and leads the development trend of gasoline engines. The new 1.8 TSI engine combines turbocharging technology with direct fuel injection, providing greater power and improved torque characteristics.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.