What is the size of the spare tire for the Geely Vision X6?

1 Answers
KathrynRose
07/29/25 6:08pm
Geely Vision X6 spare tire size is T145/80R18. Below is a detailed introduction to the spare tire of the Geely Vision X6: Full-size spare tire: The size of the original tire and the full-size spare tire are the same, so there are no restrictions on the mileage or speed when driving with the spare tire. Non-full-size spare tire: When replacing with a non-full-size spare tire, it can only be used on non-driving wheels, and the maximum speed of the car is limited to 80 km/h. Since the diameter and width of the non-full-size spare tire are smaller than the other four tires, there are various limitations. It can only serve as a temporary replacement, and the owner should promptly visit the nearest car shop for tire repair after replacement.
Was this review help?
19
0
Share
More Forum Discussions

How to Solve the Problem of Loud Engine Acceleration Noise?

Engine noise is generally caused by carbon deposits. There are several specific reasons for increased engine noise: 1. Aging or loosening of engine mounts. Engine mounts are rubber blocks between the engine and the frame. Solution: Tighten or replace the engine mounts. 2. Improper use of engine oil. If the viscosity of the engine oil does not match the engine, it can easily lead to carbon deposits, resulting in increased engine noise. Solution: Use the engine oil grade specified in the vehicle manual and avoid mixing different brands of engine oil. 3. Engine misfire. Engine misfire means one or more cylinders are not functioning properly. Solution: Check the condition of each ignition coil and cylinder spark plug.
16
5
Share

What Causes the Continuous Decrease in Antifreeze?

Antifreeze gradually decreases for the following reasons: I. Function of Antifreeze: Cooling is the basic function of coolant. When the engine is running, it generates a large amount of heat, with 60% of this heat being dissipated into the surrounding space through the cooling system. Water and methanol coolants have low boiling points and are prone to boiling. If the vehicle operates under conditions where the coolant boils, even for a short period, it can cause engine damage or even failure. In winter, when temperatures are low, substances that lower the freezing point of water are added as antifreeze to ensure the cooling system does not freeze in cold weather. Hence, coolant is sometimes referred to as "antifreeze" or "non-freezing liquid." II. Reasons for Rapid Consumption: 1. Leakage, where the leakage points usually have very obvious traces. 2. Poor circulation leading to rapid consumption; it is advisable to have a professional mechanic inspect the system. When adding antifreeze, ensure the engine has cooled down. During the addition process, start the engine and gently press the accelerator to expel air from the system. Add the coolant slowly to ensure it is fully filled. If necessary, follow the manual's instructions to bleed the cooling system. 3. Antifreeze entering the cylinder and mixing with the oil. In mild cases, there may be no water in the oil pan, but performance may be affected. In severe cases, water in the oil pan can cause unstable engine operation. Do not immediately assume the issue is with the cylinder head gasket; a damaged intake manifold gasket can also cause coolant to enter the cylinder, as some engines have water channels in the intake manifold. III. Symptoms of Decreasing Antifreeze: 1. A gradual decrease in coolant level in the external reservoir of the engine cooling system is normal. Generally, coolant should be replaced every 40,000 kilometers. As long as the coolant level in the reservoir remains above the minimum mark during the maintenance cycle, no additional coolant is needed. Proper maintenance involves checking the coolant level in the external reservoir every 5,000 kilometers. 2. Modern car engine cooling systems typically do not exhibit significant internal leaks. Leaks usually occur between the cylinder head and cylinder block, water pump housing and cylinder block, water pump shaft seal, and the junction between the thermostat valve cover and the manifold. Leaks between the cylinder head and cylinder block can cause internal seepage, while other leaks are external. Significant leaks, whether internal or external, are easily detectable. External leaks leave traces, while internal leaks may cause white smoke from the exhaust pipe or water accumulation in the oil pan. 3. Micro-leaks are high-temperature, high-pressure vapor micro-leaks, mainly occurring at the connections between the radiator's inlet and outlet hoses and metal pipes (radiator, engine inlet and outlet), radiator cap, and reservoir cap.
5
1
Share

What are all the colors available for the 2019 new Sagitar?

2019 new Sagitar comes in colors such as Polar White, Crystal Silver, Tanggula White, Gravel Black, Elegant Silver, Roman Red, Peacock Blue, Storm Blue, Deep Black, Triumph Gold, Persian Gray, Maya Red, Pacific Blue, and Seashell Gold. Below are the relevant details: 1. Model Configuration: The Sagitar is a compact car under the Volkswagen brand. This car features a MacPherson independent front suspension and a multi-link independent rear suspension. 2. Powertrain: The new Sagitar is equipped with two engines, one is a 1.2-liter turbocharged engine, and the other is a 1.4-liter turbocharged engine. The 1.2-liter turbocharged engine has a maximum power of 85 kW and a maximum torque of 175 Nm; the 1.4-liter turbocharged engine has a maximum power of 110 kW and a maximum torque of 250 Nm.
8
2
Share

How to remove adhesive from car window film?

Here are the methods to remove adhesive from car windows: 1. Alcohol/Acetone. First, prepare a soft and clean cloth, then pour a small amount of alcohol (preferably industrial alcohol) or acetone onto the cloth. Then, wipe the adhesive area repeatedly until it is completely removed. 2. Nail polish remover. Nail polish remover can effectively remove highly sticky substances. Since nail polish and adhesive have similar properties, nail polish remover can be used to remove the adhesive. 3. Heat the adhesive. You can use a heat gun to warm the adhesive, as heating can significantly reduce its stickiness. Then, use a soft and clean cloth to wipe it off with force. However, avoid using a blade to prevent scratching the car window.
8
0
Share

What does dappen car sticker mean?

dappen car sticker is a modification sticker for cars without any special meaning. Below is an introduction to dappen car stickers: 1. The material of the car sticker is mainly PVC outdoor adhesive paper that can adapt to outdoor conditions. The car sticker material needs to be more wear-resistant and UV-proof than ordinary advertising-grade materials; although the material and color are not as rich as clothing fabrics, there are still many choices such as ordinary, luminous, metal reflective, laser reflective, metal brushed, etc. 2. The best choice for car stickers is self-adhesive. Since car stickers must withstand wind and sun, waterproof, sunproof, fade-resistant, and leave no residue after removal, durability is a must-have feature. Self-adhesive is the best choice. 3. Car stickers can be freely created within the constraints of current regulations. On both sides of the car body, the hood, light eyebrows, skirts, and rims, as long as it is within the legal scope, car owners can freely use car stickers to fully express their personality and hobbies.
8
1
Share

Why Shouldn't You Shift to Neutral When Going Downhill?

The specific reasons why you should not coast in neutral when driving downhill are as follows: 1. When coasting in neutral, the car loses the engine's braking effect. During downhill driving, due to gravity, the car's speed will increase continuously. Without the engine's braking, the braking distance will be significantly longer, meaning the braking effectiveness will be greatly reduced, and the vehicle will be in an uncontrolled state. If any situation arises ahead, the driver will be unable to slow down or stop the vehicle in time, creating a significant safety hazard. 2. The likelihood of the car stalling increases when coasting in neutral. If the car stalls for any reason, it will immediately lose power steering and brake assist, leading to complete loss of control. In such a scenario, the consequences could be unimaginable. 3. For automatic transmission cars, coasting in neutral can cause the transmission to lose lubrication, increasing wear and tear on the transmission.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.