···
Log in / Register

What is the size of the Roewe i5 spare tire?

4 Answers
CassandraLynn
07/28/25 11:37pm
The size specification of the Roewe i5 spare tire is 205/60R16, which is a non-full-size spare tire. The diameter and width of this spare tire are slightly smaller than the other four tires, so it can only be used as a temporary replacement and should only be used on non-driving wheels. Additionally, the maximum speed should not exceed 80km/h. Below are some precautions for using the spare tire: 1. Regularly inspect the spare tire. The inspection mainly includes checking the tire pressure, wear, and cracks. Replace the tire as soon as possible if the tread wear reaches the wear indicator line. If there are small cracks on the tire sidewall, avoid using it for long-distance or high-speed driving, as the sidewall is thin and prone to blowouts at high speeds. 2. Do not store oil products with the spare tire. The main component of the tire is rubber, which is most susceptible to erosion by various oil products. If oil comes into contact with the tire, it can cause swelling and corrosion, significantly reducing the tire's lifespan. If the tire gets stained with oil, promptly wash it off with a neutral detergent. 3. The lifespan of a spare tire is about 4 years. Since tires are rubber products, prolonged storage can lead to aging. Generally, the aging period for tires is about 4 years, so the spare tire should be replaced after 4 years.
Was this review help?
12
0
Share
MacLiam
08/12/25 2:54am
I understand that the spare tire size for the Roewe i5 is typically a compact temporary tire like T145/70 R17, used as an emergency replacement for a full-size tire. The spare tire is made smaller primarily to save trunk space and reduce overall vehicle weight, thereby improving fuel efficiency. However, there are several safety precautions to note: do not exceed a speed of 80 km/h when using it to avoid loss of control at high speeds; maintain tire pressure within the range of 220-240 kPa and regularly check for leaks; remember to repair the original tire as soon as possible after replacement, as temporary spare tires have a short lifespan and are not designed for durability—prolonged use increases the risk of a blowout or wear on other components. As someone who pays close attention to car safety, I always remind my friends to record the spare tire size for reference and, if necessary, take a photo of the label or manual page with their phone.
Was this review help?
6
3
Share
Expand All
EmeryLee
10/01/25 6:04am
I remember the Roewe i5's spare tire has a T-type design, such as the compact size T145/70 R17, which really comes in handy during emergencies. Once on a road trip, I had a flat tire and easily replaced it with the spare using the jack and wrench from the toolkit—the smaller size made it lightweight and easy to handle. It's recommended to lift the trunk mat quarterly to check the spare tire's condition, ensuring there are no cracks or loss of pressure. When replacing, align it properly with the wheel hub to avoid misplacement, and drive slower when turning. Don’t worry about the significant size difference; most auto parts stores sell compatible spare tires for around 200 yuan—just pick one with a good warranty. For daily maintenance, avoid cluttering the trunk with items that could press against the spare tire, as this may affect its lifespan.
Was this review help?
6
1
Share
Expand All
JulietRose
11/14/25 7:52am
The spare tire specification for the Roewe i5, such as T145/70 R17, indicates that 'T' stands for temporary type, '145mm' is the tire width, '70%' is the aspect ratio, and 'R17' denotes the rim size in inches. Installing this compact spare tire may affect driving balance, so it is recommended to maintain a low speed. Regularly check the tire pressure, with the standard being around 240kPa. Common accessories can be purchased online for matching, but size differences can easily lead to uneven wear, so the original tire should be repaired promptly.
Was this review help?
1
2
Share
Expand All
More Forum Discussions

What material is generally used for sunroof glass?

Automotive sunroof glass is made of tempered glass. Since tempered glass breaks into uniform small particles without the sharp, knife-like edges of regular glass when shattered, it is known as safety glass and is widely used in automobiles and interior decoration. The specific introduction of automotive sunroof is as follows: Automotive sunroof glass maintenance: You can often clean it with fine talcum powder. The moving parts of the sunroof are made of low-maintenance materials, and the mechanical parts should be cleaned regularly with oil or lubricant. It is recommended to clean them every two months; after prolonged use of the sunroof, a considerable amount of sand particles usually deposit in its sliding tracks and gaps. If not cleaned periodically, these particles can wear down the sunroof components. Regularly clean around the sliding tracks to avoid sand particle deposition and extend the service life of the sunroof sealing ring. Generally, after 2 to 3 months of use, clean the sealing strips or sliding tracks with gauze dipped in cleaning water, then wipe them dry and apply a small amount of oil or butter; before opening the sunroof, check whether there are any obstacles on the roof that might hinder the movement of the glass panel. The design of the sunroof panel includes functions to block heat and ultraviolet rays. Please clean it with a soft cloth and cleaning agent, and avoid using sticky cleaning agents; the main concern when using a sunroof is rain or water leakage. Proper use and maintenance of the sunroof can effectively prevent leakage. Before the rainy season, in addition to cleaning dust and sand from the sliding tracks and gaps of the sealing strips, you should also spray a small amount of plastic protective agent or talcum powder on the sealing strips and other components; in winter after snow or car washing, the sunroof glass and sealing rubber frame may freeze. Forcing the sunroof open at this time can easily damage the sunroof motor and rubber sealing strips. The correct approach is to open the sunroof after snow or car washing and dry any residual water around the edges; on bumpy roads, it is recommended not to fully open the sunroof, as excessive vibration between the sunroof and sliding tracks may cause deformation of related components or even damage the motor. Additionally, it is strictly prohibited to open the sunroof during rain or when washing the vehicle. Automotive sunroof classification: Automotive sunroofs can be roughly divided into: sliding-out type, built-in type, built-in flip-up type, panoramic type, and curtain type. They are mainly installed on commercial SUVs, sedans, and other vehicle models.
11
1
Share

Is Aston Martin Four-Wheel Drive?

Aston Martin is not four-wheel drive; it is rear-wheel drive. The driving methods of automobiles are divided into three types: front-wheel drive, rear-wheel drive, and four-wheel drive. Rear-wheel drive is a traditional driving form. The driving method refers to the arrangement of the engine and the number and position of the driving wheels. Generally, cars have two rows of front and rear wheels, among which the wheels directly driven by the engine to propel the car forward are the driving wheels. The length, width, and height of Aston Martin are 5039mm, 1998mm, and 1680mm respectively, with a wheelbase of 3060mm. Its engine has a maximum horsepower of 550Ps, a maximum power of 405kW, and a maximum torque of 700Nm.
16
3
Share

How to Make Mechanical Hydraulic Power Steering Lighter?

Methods to make mechanical hydraulic power steering lighter: 1. Replace the power steering fluid with new one; 2. Adjust the driving mode on the vehicle. There are two types of hydraulic power steering systems in vehicles: one is the mechanical hydraulic power steering system, and the other is the electro-hydraulic power steering system. The mechanical hydraulic power steering system is a mechanical hydraulic servo system that operates on the principle of negative feedback control. The main components of the mechanical hydraulic power steering system include a hydraulic pump, oil pipes, a pressure fluid control valve, a V-belt, and a fluid reservoir. This type of power steering converts part of the engine's power output into hydraulic pump pressure to apply an auxiliary force to the steering system, thereby assisting in turning the tires.
3
1
Share

How to Know When to Replace Spark Plugs?

Methods to determine if spark plugs need replacement: 1. Check if the engine can start normally - if not, the spark plugs need replacement; 2. Observe engine vibration - if the engine exhibits intermittent or continuous shaking accompanied by abnormal noises, the spark plugs require replacement; 3. Inspect the electrode gap of spark plugs - if the gap is excessively wide, replacement is needed; 4. Examine the color - if severe erosion is present with phenomena like pitting, black streaks, cracks, or melted electrodes at the tip, the spark plugs must be replaced. Vehicle spark plugs should be replaced every 20,000 kilometers or 2 years (whichever comes first). The function of spark plugs is to conduct high-voltage pulses from the ignition coil into the combustion chamber, using the electrode's spark to ignite the air-fuel mixture for combustion.
16
1
Share

Why does a car idle shake like a twitch?

Reasons why a car idles and shakes like a twitch: 1. The vehicle's ignition system has malfunctioned; 2. Components in the ignition system have become loose; 3. Severe carbon buildup in the engine; 4. Aging of engine components; 5. Excessive carbon buildup in the throttle; 6. The air filter has not been replaced in time; 7. Too much carbon buildup in the fuel injector; 8. Problems with the ignition system; 9. Unstable oil pressure. Idling in a car is not a speed but rather a working condition. When the engine runs without load, it is called idling. When the engine is running, if the accelerator pedal is completely released, the engine is in an idling state. The engine speed during idling is called the idle speed, which can be adjusted by modifying the throttle opening size, among other methods.
3
2
Share

How often should the timing belt on the Buick Excelle be replaced?

The timing belt on the Buick Excelle should be replaced every 60,000 kilometers. The timing belt is a wear-and-tear component, and if it breaks, the camshaft will not operate in sync with the timing, which can potentially cause the valves to collide with the pistons, leading to severe damage. Therefore, it is crucial to replace the timing belt according to the manufacturer's specified mileage or time interval. The timing belt connects to the crankshaft and ensures the accuracy of the intake and exhaust timing through a specific gear ratio. The Buick Excelle has dimensions of 4468mm in length, 1765mm in width, and 1469mm in height, with a wheelbase of 2611mm. The car's engine delivers a maximum horsepower of 107Ps, a maximum power output of 79kW, and a maximum torque of 133Nm.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.