···
Log in / Register

What is the size of the photo required for driving school registration?

4 Answers
VivianLynn
07/29/25 12:20pm
Driving school registration photo size is 3.2cm*2.2cm. The requirements for driving school registration photos are as follows: 1. Head length: 1.9cm~2.2cm. 2. Head width: 1.4cm~1.6cm. 3. Photo background: white background. Relevant information about driving schools is as follows: 1. Driving school: A training institution that teaches drivers vehicle driving methods and driving ethics, and assists them in obtaining a driver's license by passing the examinations of the vehicle management department. 2. Teaching content: The teaching content of driving schools generally includes theoretical and practical courses. Theoretical courses include driving ethics, road traffic management regulations, driving principles and methods, automobile structure and maintenance basics, first aid knowledge, etc. Practical courses include starting, turning, parking, accelerating, shifting gears, and decelerating.
Was this review help?
3
0
Share
GideonFitz
08/13/25 11:06pm
I recently helped a friend with driving school registration, and the photo size requirement is usually a small one-inch white background ID photo of 32×22 mm. In fact, many places use the same specifications as the ID card, but it's best not to use old photos directly—they must be newly taken within the last six months. The photo requirements are quite detailed: no jewelry or glasses, dark-colored clothing, and both ears and eyebrows must be visible. I recommend going directly to a photo studio and asking for a driver's license photo—they know the process well. My friend tried taking the photo with their phone and got rejected twice because the background shadows weren't completely removed. Some driving schools also require an electronic version, so it's safest to save it on a USB drive in advance.
Was this review help?
20
1
Share
Expand All
DelMaci
10/09/25 3:08am
I remember when I was learning to drive last year, the driving school required small one-inch color photos with a white background and no hat, sized 32mm×22mm. It's advisable to print several copies for backup, as they'll also be needed for exams. Pay attention to these photo details: wear black or dark blue clothes, keep a natural expression without grinning, ensure hair doesn't cover the forehead, and absolutely no photo editing or beauty filters. Nowadays, many cities have self-service photo booths that take just three minutes and can directly upload to the system, which is more convenient than photo studios. Before registering, it's best to check the local DMV website—for example, Shenzhen requires photos with an ID number watermark, and the specifications differ slightly from other cities.
Was this review help?
7
0
Share
Expand All
MatteoLynn
11/22/25 4:24am
The driving school registration photo generally requires a small one-inch size, which is a 32×22 mm white background ID photo. Wear dark-colored clothes when taking the photo, avoid wearing jewelry or glasses, and ensure hair does not cover the face. There may be slight variations in different regions—for example, Chengdu requires the photo size to be 30-100KB, while Beijing mandates that both ears must be visible. To avoid hassle, simply go to a photo booth partnered with the local vehicle management office, as they are familiar with all the requirements. Remember to prepare eight printed copies in advance, as two additional copies may be needed for the second subject test. Keep an electronic version on your phone as a backup, as the registration system often requires uploading it.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

Will the Haval H6 automatically lock when the driver leaves?

Haval H6 will automatically lock after the owner leaves. Here are the specific details about the Haval H6: 1. Vehicle Positioning: The Haval H6 is positioned as a compact SUV, available in Blue Label and Red Label versions. 2. Powertrain: It is equipped with two engines: a 1.5T and a 2.0T. The 1.5T engine has a maximum power of 124kW and a peak torque of 285Nm, while the 2.0T engine delivers a maximum power of 145kW and a peak torque of 355Nm. 3. CVVL Technology: The 1.5T engine features CVVL technology. CVVL technology primarily adjusts the valve opening and closing time, valve lift, and duration, ensuring sufficient air intake under various engine conditions, thereby improving engine efficiency.
19
0
Share

What are the tips for novice drivers driving on national highways?

Novice drivers driving on national highways should pay attention to the following tips: The most important thing is to adjust your driving mindset, drive according to regulations, and display a novice driver sign. Additionally, avoid driving behind large trucks for extended periods. Since the road conditions on national highways can be complex, always be prepared to slow down. Novice drivers should note the following when driving on national highways: 1. Drive as close to the center line as possible: When there are no other vehicles, try to drive near the center line, positioning yourself as if you are sitting on the center line. This provides more room to maneuver in case of unexpected situations on either side. 2. Remember to signal when overtaking: When overtaking, remember to use your turn signals and honk the horn in a short-long-short pattern, which sounds more friendly. Also, flash your headlights to alert the driver in front. 3. Slow down when approaching villages: Always reduce speed when passing through villages, as villagers may not be fully aware of traffic rules. 4. Avoid picking up strangers: When driving in unfamiliar areas, try not to give rides to strangers flagging you down.
1
5
Share

What are the reasons for the JMC SVS light being on and diesel engine power loss?

Here are the specific reasons for the JMC SVS light being on and diesel engine power loss: 1. Poor engine combustion state. 2. Engine knocking. 3. Poor quality of vehicle fuel. 4. Dirty engine cylinder interior with accumulated carbon deposits. 5. The electronic control unit cannot obtain engine data. Here is extended information about the JMC SVS light: 1. Function: The car SVS light is similar to the engine fault light. When the SVS indicator is on, it indicates that the engine control unit has detected an error signal from a sensor or that it is beyond the usage standard. When the ignition switch is turned on, the car SVS indicator light will come on for an automatic check and will turn off automatically after a few seconds. 2. Working mode: When the vehicle's ignition key is turned on, the onboard computer will perform a self-check and this light will come on, and it will turn off after the vehicle is started; when the engine ECU detects a fault, the SVS light will come on; if this light comes on while the vehicle is in motion, it indicates that there is a fault with the vehicle's engine.
6
1
Share

What is the correct method for defogging a car?

Methods for defogging a car are as follows: 1. Air conditioning defogging: Turn on the front window defogging mode, set the fan speed to maximum, turn on the A/C switch, and then adjust the temperature to the lowest setting. The fog on the glass will be eliminated shortly. Additionally, some models are equipped with electric heating for the rear windshield and exterior rearview mirrors. Simply click the switch to turn it on, and the fog will be cleared in about a minute. 2. Air convection: Opening the windows can increase air convection, reduce the temperature difference between the inside and outside of the car, and weaken the conditions for fog formation. 3. Defogging spray: When using, simply spray it evenly on the glass surface and then wipe it clean with a dry towel. The principle is to use surfactants to leave a protective film on the glass surface, altering the surface tension of water molecules and causing fog droplets to coalesce into larger droplets, thus not obstructing vision. This can also be used on other car glass surfaces, especially the exterior rearview mirrors. 4. Homemade defogging spray with dish soap: Mix dish soap and water in a 1:6 ratio in a bottle, spray and wipe before traveling. The effect is comparable to commercially available defogging sprays, though the durability is slightly inferior.
5
2
Share

How to Clear the Car Maintenance Reminder?

Clearing the car maintenance reminder can be done as follows: 1. First, turn off the car's ignition, then press and hold the SET button on the right side of the car's dashboard with your left hand. 2. While holding the "SET" button, turn on the ignition. 3. Then release the "SET" button and press it once more. 4. Finally, turn off the ignition and then turn it back on to complete the process of clearing the maintenance reminder. Additional Information: 1. During every routine car maintenance, the oil filter must be replaced. For cars driven in areas that are not particularly dusty, the air filter can generally last for 20,000 kilometers, requiring only cleaning at the 7,500-kilometer mark. The lifespan of the fuel filter depends on the quality of the fuel used. If you consistently refuel at reputable gas stations and do not experience fuel supply issues, you can consider replacing it after more than 20,000 kilometers. 2. Under normal usage conditions, brake pads can last for 30,000 to 40,000 kilometers, and the original battery can last for 3 to 4 years. There are various types of spark plugs: standard nickel alloy spark plugs can last for 20,000 to 30,000 kilometers, platinum spark plugs for 80,000 to 100,000 kilometers, and iridium spark plugs for 30,000 to 40,000 kilometers.
15
0
Share

Why does the engine RPM drop slowly when releasing the throttle?

Reasons for slow RPM drop when releasing the throttle are as follows: 1. This may be caused by an over-rich air-fuel mixture in the engine, which can result from various factors; 2. It might be due to malfunctioning sensors. Proper engine operation relies on numerous sensors and electronic components - if certain sensors fail, it may cause abnormal engine performance. Below is relevant information about engine sensors: 1. Sensors around the engine include oxygen sensors, mass airflow sensors, intake air temperature sensors, camshaft position sensors, coolant temperature sensors, etc. 2. If any sensor malfunctions, it may cause the engine to exhibit an over-rich mixture condition, resulting in minimal RPM reduction when releasing the throttle pedal.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.