What is the size of the Honda XRV windshield?

1 Answers
DelilahLee
07/30/25 1:39am
The size of the Honda XRV windshield is 1330*760mm. Below are some relevant details about the Honda XRV: 1. Dimensions: The Honda XRV has a length of 4328mm, a width of 1772mm, and a height of 1610mm, with a wheelbase of 2610mm. 2. Powertrain: It is equipped with either a 1.8L naturally aspirated engine or a 1.5L Earth Dreams engine. The former delivers a maximum power of 136Ps. The transmission system is paired with either a 6-speed manual transmission or a CVT transmission. 3. Features: It comes with a body stability system, front and rear head airbags, rear parking radar, two driving mode switches, an automatic parking feature, and an openable panoramic sunroof.
Was this review help?
2
0
Share
More Forum Discussions

What Causes the Airbag Indicator Light to Illuminate in the Car?

Introduction to the reasons why the airbag indicator light is on: The airbag warning light may illuminate during the engine's self-check. The indicator light will turn on when starting the car but will go off after the self-check is completed, typically within about 5 seconds. This is a normal phenomenon. If the light does not turn off, it indicates a fault. Below are specific details on related content: 1. If the airbag indicator light continues to flash or remains lit after 6-8 seconds of vehicle startup, or if the airbag indicator light flashes for 5 seconds and then stays lit while the vehicle is in operation, these two situations indicate that the airbag may have a malfunction. In such cases, it is advisable to visit a 4S shop for inspection and repair as soon as possible. 2. The airbag system generally consists of sensors, a microprocessor, an electronic control unit, an airbag cover and support ring, the airbag itself, and an airbag module, among other components. If the warning light is on, it may indicate damage to one of these components. 3. The quality of airbags may become unreliable after 8-10 years of use, so it is recommended to perform maintenance every 10,000 to 20,000 kilometers.
3
2
Share

What's the matter with the urea gauge not displaying?

This situation is most likely due to a system malfunction. Vehicle weakness, normal urea consumption: Use a diagnostic tool to read the fault code, indicating that the engine has exceeded the emission limit with no other faults. By removing the urea nozzle and performing an injection test with the diagnostic tool, no abnormalities were found. During the inspection, a large amount of urea crystals were found severely clogging the high-temperature catalytic pipe. The exhaust elbow pipe was removed for cleaning, and compressed air was used to clean the soot adhering to the ceramic surface of the catalytic converter. After replacing the urea solution, the test failure disappeared. Low urea pressure, high urea consumption: Fault symptom: The vehicle's instrument panel warning light frequently flashes. The fault code indicates low urea pressure and high urea consumption. The urea tank temperature is too high, causing urea to volatilize and be discharged from the exhaust port, crystallizing around the tank. Excessive crystallization at the exhaust port leads to blockage. Summary: During the operation of the urea system, severe vacuum suction in the urea chamber caused urea decompression blockage, resulting in a low urea pressure fault. Insufficient power, urea consumption too high or too low: The fault light remains on. Insufficient power, torque limited to 1800 rpm. The SCR system is not working properly, with urea consumption being too high or too low.
11
0
Share

Will the Car Roll Away If the Handbrake Is Not Properly Engaged?

If the handbrake is not properly engaged, the car will not roll away. Traditional Handbrake: The traditional handbrake, also known as a mechanical handbrake, is the most widely used type of parking brake. The structure of the traditional handbrake is simple, consisting of components such as a brake lever, cable, brake mechanism, and return spring. When parking, pulling up the handbrake lever locks the driveshaft, thereby locking the front wheels (or sometimes the rear wheels), ensuring the vehicle remains stable when parked. Foot Brake: As the name suggests, the foot-operated handbrake is engaged by stepping on a pedal, similar to how the brake is operated. The operation of this parking brake is largely similar to the traditional handbrake. Pressing the pedal engages the brake, and pressing it again releases the brake, causing the pedal to automatically spring back. Electronic Handbrake: The electronic handbrake, or electronic parking brake system, uses electronic control to achieve parking brake functionality. Essentially, it is an upgraded version of the traditional handbrake, replacing the manual pull with an electric mechanism. A small button can activate or deactivate the handbrake function. The electronic handbrake is most commonly located behind the gear lever or near the driver's seat on the left side. The universal symbol for it is a circle with a 'P' inside and two parentheses on either side of the circle.
13
4
Share

Is the Audi Q7 a 4WD vehicle?

Audi Q7 is a 4WD vehicle with a front-engine, four-wheel-drive configuration, specifically featuring Audi's proprietary quattro all-wheel-drive system. This renowned quattro system is employed across multiple high-performance Audi models, earning exceptional reputation for its capability and serving as a benchmark for permanent all-wheel-drive technology. The Audi Q7 is a premium midsize SUV that masterfully blends sportiness, functionality, cutting-edge technology, and luxury. On the road, it distinguishes itself through exceptionally dynamic handling and outstanding sporty characteristics.
10
2
Share

Will using 92-octane gasoline in a car designated for 95-octane have any impact?

Using 92-octane gasoline in a car designated for 95-octane will have an impact. If 92-octane gasoline is used for an extended period, it can cause certain damage to the car's engine, and in severe cases, may even lead to engine failure, rendering it beyond repair. The reason cars specify a particular octane rating is due to differences in engine performance. Cars that require higher-octane gasoline generally have engines with better anti-knock properties. If an engine is designed for 95-octane fuel, it must use 95-octane gasoline. Prolonged use of a lower-octane fuel can affect the car's ignition system, fuel injectors, and spark plugs, potentially leading to issues such as engine shaking, bent valves, or damage to the valve cover. There is no difference in fuel quality between 95-octane and 92-octane gasoline. Typically, high-compression engines require higher-octane fuel. 92-octane gasoline has an octane rating of 92, while 95-octane gasoline has an octane rating of 95. The chemical compositions of these two fuel types are quite similar, but 95-octane gasoline offers higher fuel efficiency and provides more robust power for the vehicle. Generally, naturally aspirated cars use 92-octane fuel, while turbocharged cars require 95-octane fuel.
13
5
Share

How to Control Speed with an Automatic Transmission?

Introduction to speed control with an automatic transmission: Vehicles with automatic transmissions do not require manual gear shifting, as the computer automatically shifts gears based on the depth of the accelerator pedal press. In other words, to control speed in an automatic transmission car, you only need to manage the accelerator pedal properly. For smooth driving, gently lifting the accelerator pedal at appropriate times will prompt the transmission to upshift automatically. This keeps the engine at a lower RPM for the same speed, improving fuel efficiency and providing a quieter driving experience. Further gentle pressing of the accelerator pedal to continue acceleration won't immediately cause the transmission to downshift, as this is a designed feature to prevent frequent gear changes—early upshifting and delayed downshifting. Below are related details about automatic transmissions: 1. Acceleration: Press the accelerator pedal, and the car will gradually accelerate. 2. Manual Cruise: After stabilizing the speed, keeping the accelerator pedal steady will maintain a constant speed, with minor adjustments possible based on road conditions. 3. Automatic Cruise: Once speed is stable, activating the "cruise control function" allows you to release the accelerator pedal, and the car will maintain a constant speed automatically. Braking or pressing the accelerator again will deactivate it. 4. Gradual Deceleration: Gradually releasing the accelerator pedal will slow the car down progressively. 5. Emergency Deceleration: Release the accelerator pedal and press the brake pedal for rapid deceleration.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.