What is the size of the GAC Trumpchi GS4 speakers?

2 Answers
DaniellaLee
07/28/25 2:09pm
The tweeter of the GAC Trumpchi GS4 is 1.5 inches, and the mid-bass speaker is 6.5 inches. The GAC Trumpchi GS4 is a 5-door, 5-seat compact SUV with a body length, width, and height of 4545mm, 1856mm, and 1668mm respectively, a wheelbase of 2680mm, a fuel tank capacity of 55 liters, and a trunk capacity of 470 liters. The Trumpchi GS4 is equipped with a 1.5T inline 4-cylinder turbocharged engine, with a maximum horsepower of 169PS, a maximum power of 124kW, and a maximum torque of 265Nm, paired with a 6-speed manual transmission.
Was this review help?
15
4
Share
LaDylan
08/11/25 10:22pm
I've repaired many Trumpchi GS4 car audio systems, and the factory speakers are typically 6.5-inch units installed in both front and rear doors. Speaker size greatly impacts sound quality—standard 6.5-inch drivers deliver balanced soundstaging, though the stock units use basic materials with mediocre bass performance. If upgrading to premium 6.5-inch speakers, ensure 4-ohm impedance matching to prevent amplifier damage. Door panel removal is required for installation—use professional tools to avoid interior scratches. The door cavities are acoustically tuned, so oversized speakers may compromise cabin space. Most owners can simply replace with OEM-spec units. This common SUV speaker size ensures hassle-free maintenance without affecting daily driving.
Was this review help?
19
0
Share
Expand All
More Forum Discussions

What to Do When the Car Can't Be Pulled Out of P Gear?

The solutions for when the car can't be pulled out of P gear are: 1. Start the vehicle, press the brake pedal, and shift into another gear; 2. Press the brake pedal and then switch gears. The P gear locking mechanism in an automatic transmission consists of a locking gear, a locking pin, and a set of action mechanisms. After engaging P gear, the cable drives the connecting ball pin, causing the working pin to slide and the locking pawl to engage with the parking gear, locking the vehicle's gear shift. The gears in an automatic transmission car include: P gear for parking, R gear for reverse, N gear for neutral, D gear for drive, L gear for low speed, S gear for sport mode, and OD gear for overdrive.
1
2
Share

What are the causes of unstable idle speed in a BMW 523?

The main causes of engine idle speed fluctuation include: ignition electrical faults, such as ignition coils, spark plugs, etc.; fuel supply issues, such as excessively low or high fuel pressure, fuel pump, fuel filter, fuel injectors, etc.; intake system leaks; sensor failures, such as the front oxygen sensor, coolant temperature sensor, camshaft/crankshaft position sensor, VANOS, etc.; power supply problems, such as unstable generator output; and DME control module faults. Methods to reduce fuel consumption: The longer the idle time while parked, the higher the fuel consumption, so try to minimize idle parking time. Factors affecting fuel consumption: Various operating conditions such as acceleration, deceleration, braking, and engine idling.
5
0
Share

What to Do When a Car Makes Too Much Noise While Driving?

Solutions for excessive noise while driving include: 1. Install a soundproofing pad under the hood to block engine noise from entering the cabin and provide insulation; 2. High tire pressure can increase noise—attach a piece of velvet cloth to the tire mudguard; 3. Add sealing strips to the door frames, place soundproofing material inside the doors, or apply soundproofing pads and vibration dampening boards to the trunk floor. Causes of excessive car noise include: 1. Engine noise; 2. Tire noise; 3. Wind noise; 4. Chassis noise, with engine noise further categorized into cold-start and hot-engine anomalies.
13
4
Share

What are the causes of abnormal engine noise?

Causes of abnormal engine noise include: 1. Carbon buildup in the engine throttle; 2. Blocked exhaust system; 3. Faulty spark plugs; 4. Muffler issues; 5. Cooling system failure. An engine is a machine that converts other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, jet engines, and electric motors. Internal combustion engines typically convert chemical energy into mechanical energy. The term 'engine' can refer to both the power-generating device and the entire machine including the power unit. Common cylinder configurations for automobile engines are 3-cylinder, 4-cylinder, 6-cylinder, 8-cylinder, 10-cylinder, and 12-cylinder. If abnormal engine noise occurs during daily use, it is recommended to contact the local 4S dealership for timely inspection and repair.
1
3
Share

Is the Infiniti QX60 domestically produced?

Infiniti QX60 is not domestically produced, it is an imported vehicle. This model is a large luxury seven-seater SUV under the Infiniti brand, with body dimensions of 4997mm in length, 1960mm in width, and 1750mm in height, and a wheelbase of 2900mm. The Infiniti QX60 is equipped with a 2.5L inline four-cylinder supercharged engine, incorporating hybrid technology. Based on the original 3.5L model, two additional variants have been introduced: the 2.5L Excellence Edition and the 2.5L All-Round Edition. The primary difference between these two models lies in their drivetrain configurations, with the Excellence Edition being front-wheel drive and the All-Round Edition featuring all-wheel drive.
14
0
Share

What is the usage method of the L gear in a car?

The usage method of the L gear in a car is: simply push the gear lever to the L position. The L gear is a low-speed gear used for climbing or descending slopes. In this gear, the automatic transmission will automatically lock the gear, preventing it from shifting to higher gears, and the transmission will maintain a lower gear without upshifting. Introduction to automatic transmission gears: 1. P gear is the parking gear: used for long-term parking of the vehicle; 2. R gear is the reverse gear: used when the vehicle needs to move backward; 3. N gear is the neutral gear: used when the vehicle is parked for a short time without turning off the engine; 4. D gear is the drive gear: when the gear lever is in the D position, the vehicle will automatically shift gears based on throttle opening and speed data.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.