What is the size of the front windshield of the Geely Emgrand GS?

What do high-level braking and low-level braking mean?

Voltage higher than 12V when the controller stops output and equal to 0V when the controller stops output. Definitions of high-level braking and low-level braking: High-level braking is when the voltage of the brake line is higher than 12V, the controller stops output; low-level braking is when the voltage of the brake line is equal to 0V, the controller stops output. Differences between high-level braking and low-level braking: Different circuit voltages: The high-level braking voltage of an electric vehicle is the battery voltage; the low-level braking of an electric vehicle has no voltage. Different wiring connections with the controller: High-level braking of an electric vehicle: connected to the controller through one wire; low-level braking of an electric vehicle: connected to the controller through two wires. Different principles: High-level braking of an electric vehicle: by outputting a battery voltage to the controller, the transistor inside the controller is cut off, and the controller does not output power for driving; low-level braking of an electric vehicle: by connecting the transistor inside the controller to the negative terminal, the transistor is cut off, and the controller does not output power for driving.

6

4

Share

How to Restore Malfunctioning BYD Window Lift?

BYD window lift malfunction restoration methods are as follows: 1. Repair Method: Directly pull up the window button to raise the window to the top. Keep holding for 3-5 seconds without releasing your finger, then press the window button to lower the window completely. Similarly, hold for 3-5 seconds before releasing. 2. Additional Information: At the 2012 Beijing Auto Show, BYD Auto debuted the Qin model equipped with its second-generation DM hybrid powertrain. Compared to the first generation, the Qin features a completely new design instead of using existing BYD models. The front adopts a trapezoidal large-mouth grille, complemented by sharp fluid-style headlights on both sides. The Qin incorporates BYD's self-developed mobile power station technology, allowing the vehicle to convert into a standard two/three-hole power strip via an adapter device, enabling external 220V AC power discharge using the vehicle's battery. In pure electric mode, the Qin offers a comprehensive range of 80 km under standard conditions, effectively alleviating range anxiety with short-distance pure electric and long-distance hybrid modes.

3

2

Share

What are the reasons for a car shaking a bit?

The following are the main reasons why a car may shake a bit: 1. Tire issues: A car's wheel is an assembly composed of the tire and rim. However, due to manufacturing reasons, the mass distribution of this assembly cannot be perfectly uniform. When the car wheel rotates at high speed, it forms a dynamic imbalance, causing the wheel to shake and the steering wheel to vibrate while driving. 2. Engine issues: For example, problems with the ignition system, such as misfiring or cylinder misfires, can cause the engine to shake. In such cases, it is advisable to inspect the vehicle as soon as possible to eliminate potential hazards and avoid further damage. 3. Hydraulic power unit imbalance during operation: When a single-rod double-acting piston cylinder is supplied with oil from the small chamber, the speed is not as fast as when supplied from the large chamber. This is caused by the slower oil discharge speed from the large chamber of the cylinder. The reason is that the inlet and outlet ports of the upper and lower chambers of the single-rod double-acting piston cylinder are equipped with components such as balance valves, hydraulic locks, and throttle valves. These are installed to control the normal operation and steady speed of the cylinder, ensuring the equipment operates normally and safely.

11

5

Share

What is the difference between ABS red and yellow?

ABS red and yellow differ in that yellow indicates a fault, while red indicates activation. Below are the details regarding the differences between ABS red and yellow: Yellow Appearance: An ABS yellow light indicates a fault in the ABS system, which may cause the ABS system to stop functioning. This can result in reduced braking effectiveness, increased braking distance, and poorer handling performance during braking. Therefore, when the ABS light turns yellow, the fault should be promptly addressed. Red Appearance: An ABS red light signifies that the car's ABS system is fully operational and functioning without any faults. The ABS system is a modern braking system that provides intelligent control over the car's brakes, ensuring normal driving conditions and enabling safe braking.

15

4

Share

How to Remove the Rear Seats of an Old Santana?

First, lift the rear seat upwards with force. After removing it, proceed to dismantle the backrest. To remove the backrest, you need to first pull out the lifting rod at the top, which will allow you to take off the rear seat. Below is some information about the Santana: 1. The 2019 Santana is equipped with a 1.5L L4 naturally aspirated engine. For the China V model, it has a maximum horsepower of 110 PS, maximum power of 81 kW at 6000 rpm, maximum torque of 150 N·m at 4000 rpm. 2. The China VI model has a maximum horsepower of 111 PS, maximum power of 82 kW at 6100 rpm, maximum torque of 145 N·m at 4000 rpm. 3. The transmission system is matched with a 5-speed manual or 6-speed automatic transmission. The drivetrain is front-engine, front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam non-independent suspension. In actual driving, the EA211 engine-equipped new Santana shows very responsive engine performance, with smooth gear shifts in congested urban traffic, without any jerking sensation.

19

4

Share

Can I Claim Insurance If I Damage My Own Car?

Whether you can get compensation from the insurance company after damaging your own car depends on the type of insurance you have purchased. The specific details are as follows: 1. If you have only purchased Compulsory Traffic Accident Liability Insurance (CTPLI) and Third-Party Liability Insurance (TPL), you cannot receive compensation. Compulsory Traffic Accident Liability Insurance (CTPLI) is a mandatory liability insurance where the insurance company compensates for personal injury, death, or property damage to victims (excluding the driver and passengers of the insured vehicle) caused by road traffic accidents involving the insured vehicle, within the liability limits. CTPLI is a compulsory insurance mandated by national law, with premiums set at a unified national standard. Third-Party Liability Insurance (TPL) covers accidental incidents caused by the insured or legally permitted drivers using the insured vehicle, resulting in bodily injury, death, or direct property damage to a third party, for which the insured is legally liable. The insurance company is responsible for compensation. 2. If you have purchased Vehicle Damage Insurance, you can receive compensation. Vehicle Damage Insurance covers losses to the insured vehicle caused by natural disasters (excluding earthquakes) or accidents within the insurance liability scope. Most insurance companies' Vehicle Damage Insurance generally covers losses to the insured vehicle due to natural disasters such as lightning, storms, heavy rain, floods, and accidents such as collisions and overturning, as well as related rescue costs.

2

0

Share

What is the size of the front windshield of the Geely Emgrand GS?

What do high-level braking and low-level braking mean?

How to Restore Malfunctioning BYD Window Lift?

What are the reasons for a car shaking a bit?

What is the difference between ABS red and yellow?

How to Remove the Rear Seats of an Old Santana?

Can I Claim Insurance If I Damage My Own Car?

What is the displacement of 653t?

What does 4PR tire mean?

What does a speed limit of 60 mean?

What is the general warranty period for car glass?