What is the size of the Elantra wiper blades?

2 Answers
Rich
09/05/25 8:01am
The size of the Elantra wiper blades is 26 inches and 14 inches, which converts to 65 cm and 35 cm. Here is some related information about wiper blades: 1. Function: Car wiper blades are used to clear raindrops from the glass surface during rainy weather, ensuring a clear and unobstructed view for the driver. Driving safety is of utmost importance, and wiper blades help reduce the risk of traffic accidents, ensuring safer travel. 2. Maintenance: (1) Regular inspection: Checking the wipers is simple. Spray some cleaning fluid, activate the wipers, and observe if they move smoothly. Listen for any loud "scraping" sounds. After one or two sweeps, check if any water remains on the windshield and look for any visible scratches. If there are obvious marks, it indicates that the rubber blade has aged and should be replaced. (2) Avoid prolonged sun exposure: Keeping the wipers out of direct sunlight for extended periods can extend their lifespan. (3) Avoid oil contamination: Oil on the glass can cause water to bead up and form stubborn droplets, leading to poor wiping performance. Similarly, if the windshield or wipers come into contact with oil, they may not clean rainwater effectively. Although wipers rest on the windshield, they are often overlooked during routine maintenance. If oil stains are found on the glass, it's best to clean the wiper blades and glass with a glass cleaner during car washing.
Was this review help?
17
0
Share
LeAnderson
09/17/25 8:12am
I've been driving a Hyundai Elantra for several years. From what I remember, the wiper sizes are mainly 26 inches for the driver side and 16 inches for the passenger side, but it depends on the year. For example, models after 2015 might have minor adjustments. Last time I replaced them myself, I got the wrong size - an 18-inch for the passenger side. After installation, it couldn't clean the edges properly, and I almost couldn't see the road clearly during rain! I learned my lesson: always measure the length of the old blades before replacing them, or check the car manual. Wiper rubber strips should be inspected every six months, and replaced if severely worn. They're inexpensive and save trouble. Proper sizing not only ensures safety but also extends the motor's lifespan. When washing the car, remember to clean the windshield to prevent rubber strip aging.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

What Brand is the Bull Logo Car?

The car with the bull logo is Lamborghini. Here is some relevant information: 1. The logo of Lamborghini is a powerful bull charging towards its opponent, which aligns with the characteristics of Lamborghini's high-performance sports cars. It is said that this logo also reflects the founder Ferruccio Lamborghini's indomitable spirit, much like a bull. 2. Automobili Lamborghini S.p.A. is an Italian automobile manufacturer, one of the world's top sports car makers and a symbol of European luxury. The company is based in Sant'Agata Bolognese, Italy, and was founded by Ferruccio Lamborghini in 1963.
15
2
Share

What is the fuel consumption of Toyota Corolla on urban roads?

Toyota Corolla has a combined fuel consumption of 7-8 liters per 100 kilometers on urban roads. Below are specific explanations regarding fuel consumption: 1. Vehicle weight: The car body is relatively large and heavy, leading to higher fuel consumption. 2. Engine displacement: A larger engine displacement provides more power but requires more fuel, resulting in higher fuel consumption. 3. Road conditions: Fuel consumption is lower when driving on highways because the engine operates more stably at lower RPMs. In contrast, driving in congested areas or urban roads with frequent starts and stops leads to higher fuel consumption. 4. Driving habits: Gentle driving results in lower fuel consumption, while aggressive driving increases it.
6
5
Share

What is the speed range for each gear in a car

Manual transmission speed ranges for each gear are as follows: 1st gear 15 to 20 km/h; 2nd gear 25 to 40 km/h; 3rd gear 40 to 60 km/h; 4th gear 60 to 75 km/h; 5th gear above 75 km/h. Functions of manual transmission: Manual transmission (MT), also known as manual gearbox, requires manually shifting the gear lever to change the gear engagement inside the transmission, thereby altering the gear ratio to achieve speed variation. Manual transmission uses shift forks to change the gear ratio (tooth ratio) of meshing gears, consequently modifying the driving torque to suit different operating conditions. Purpose of car gears: While driving, shifting gears enables the engine to operate within its optimal power performance range. All driving conditions have corresponding shift points, with the ultimate goal of reducing fuel consumption.
16
4
Share

What is the air pressure for car tires?

The normal tire pressure for a car is between 2.3 and 2.5 bar, with the maximum not exceeding 3.0 and the minimum not below 2.1. Below is an introduction to tire pressure: Hazards of incorrect tire pressure: Incorrect car tire pressure can affect the lifespan of the tires. If the tire pressure is too high, even if it doesn't cause a blowout, the excessive stretching of the tire rubber can lead to deformation that cannot be restored. Additionally, high tire pressure reduces the contact area between the tire and the ground, which may lower fuel consumption but can also impair the car's braking performance. Precautions for tire pressure: Maintaining proper tire inflation ensures handling, tread longevity, and driving comfort. It is recommended to regularly check the tire pressure, including the spare tire. Even well-maintained tires can lose 10-20 kPa of pressure per month, so regular checks are essential.
12
4
Share

Are Head Airbags Important?

Head airbags are extremely important. Below is an introduction to the functions and structure of head airbags: Functions of Head Airbags: Head airbags primarily protect the occupants' heads during side collisions. Their working principle involves deploying to cover the windows during a collision, preventing the front passengers' heads from directly hitting nearby hard components, cushioning the lateral displacement inertia of the head, and safeguarding the neck and head. In critical moments, they can reduce head injuries. It's important to note that airbags provide the best protection in major accidents only when used in conjunction with seat belts. Structure of Head Airbags: Head airbags, also known as side curtain airbags, are mostly designed in a front-to-rear continuous style. The front head airbags are typically located on the steel beams on both sides of the windshield. They usually consist of an airbag, airbag fabric, gas generator, gas generator bracket, and tubing.
20
1
Share

Should Transmission Fluid Be Changed at a 4S Shop?

Transmission fluid does not necessarily need to be changed at a 4S shop; car owners can change it themselves. The replacement cycle and precautions for transmission fluid are as follows: Replacement Cycle: Under normal circumstances, automatic transmissions should have their transmission fluid changed every 2 years or every 40,000 kilometers. For manual transmissions, it is generally recommended to change the transmission fluid every 3 years or every 100,000 kilometers. Precautions for Replacement: When changing the transmission fluid, it is important to pay attention to the amount of fluid. Too much or too little fluid can damage the car's transmission. Excessive fluid may increase resistance during operation or cause the fluid to foam and deteriorate, leading to abnormal wear of components. Insufficient fluid, on the other hand, may result in a lack of power, sluggish gear shifting, and over time, may cause the transmission to overheat and prevent normal driving.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.