What is the size of the dashboard audio in the old Jetta?

2 Answers
OEliza
07/25/25 2:11pm
The dashboard audio in the old Jetta is 3.5 inches. The old Jetta belongs to the compact car category, with body dimensions of 4487mm in length, 1706mm in width, and 1470mm in height, and a wheelbase of 2603mm. In terms of power, the old Jetta offers two engine options: 1.4L and 1.5L. In terms of appearance, the front face of the old Jetta adopts Volkswagen's classic design elements, with a dot-matrix grille defining the family design concept. This car not only inherits the design essence of the Volkswagen brand but also integrates a sense of fashion and sportiness well. The new Jetta brand's various models all adopt the family-style front face design, with the sedan inheriting the appearance foundation of the classic Volkswagen Jetta, perfectly inheriting German genes and Volkswagen quality as a whole brand.
Was this review help?
4
1
Share
Crystal
08/11/25 9:02pm
I've been driving the old Jetta for so many years, and those small speakers on the dashboard are usually 5.25 inches in size, like the models from the 1990s. The factory sound quality is decent, but they might distort over time. I suggest first checking by removing the speaker covers to measure the size. If you want to improve the sound, upgrading directly to 6.5-inch units is more cost-effective, as there are ready-made brackets available in the market. DIY installation isn't difficult, just be careful not to make wiring mistakes. After the upgrade, the bass will be much stronger, making driving with music more enjoyable. Regular cleaning to prevent dust can extend their lifespan. If you're on a tight budget, maintaining the original parts is also an option.
Was this review help?
1
3
Share
Expand All
More Forum Discussions

Which traffic light to observe when making a left turn at a T-junction?

Observe the traffic light on the opposite side of the road. You can only make a left turn when the green left-turn arrow light or the green circular light is on: According to the "Road Traffic Safety Law": For straight-going vehicles on the right side of a T-junction where there is no crossroad, they may proceed when encountering a red or yellow light, provided that they do not hinder the passage of released vehicles and pedestrians. When traffic lights are present: If there are traffic lights at the T-junction, you must follow the red light instructions. When the light is red, vehicles must wait behind the stop line. Pedestrian crossing lights: At a T-junction with pedestrian crossing lights, motor vehicles should follow the pedestrian crossing light instructions. When the light is red, passing through the T-junction is not allowed.
13
0
Share

What Causes a Manual Transmission to Fail to Engage Gear?

Introduction to reasons for manual transmission failing to engage gear: P-gear lock solenoid valve failure: For safety considerations, to prevent the vehicle from accidentally shifting into other gears during startup, the P-gear solenoid valve is installed. This solenoid valve requires a signal from the brake pedal to release. Therefore, these two components are interrelated. If any one of them fails, it will result in the gear lever being unable to shift out of P-gear into other gears. Gear lever assembly internal failure: Internal gear wear in the gear lever causes it to get stuck, making it difficult to push or pull, leading to the inability to shift gears or difficulty in shifting. Incomplete clutch disengagement: This may be caused by faults in the clutch disc and pressure plate. Generally, this requires replacing the clutch three-piece set (friction disc, pressure plate, and release bearing).
1
4
Share

Is there a minimum speed limit on urban expressways?

Urban expressways have speed limits ranging from 60km/h to 100km/h Standard characteristics of urban expressways: One main principle of urban expressways is that they have no traffic lights, allowing continuous traffic flow. Therefore, all intersections must be designed as interchanges, whether simple or large-scale, with the specific configuration depending on the related roads. Functions of urban expressways: They reduce the number of at-grade intersections and traffic lights, thereby increasing driving speed, shortening travel time for longer distances, minimizing the mixing of motorized and non-motorized vehicles, decreasing the likelihood of road congestion, and promoting economical and environmentally friendly driving speeds. These features significantly enhance traffic safety and transportation efficiency across the city. They also play an indispensable role in connecting to outbound highways, linking satellite towns, and providing direct access to airports and ports.
16
0
Share

What Causes the Door Seal to Make Noise on Rough Roads in a New Car?

New car door seal noise reasons on rough roads: Door hinge wear: Wipe off surface dust with a cloth or tissue, then apply a small amount of lubricating oil using a cotton swab to repeatedly coat the door hinge and the red-circled area of the door limiter. Open and close the door repeatedly, and repeat the steps of applying oil and operating the door until the noise disappears. Avoid excessive lubrication to prevent contaminating other door parts. If the issue persists, it may be due to wear and require replacement of new hinges and limiters. Door seal aging: Check if the door seal is aging. The seal is a rubber product, so regularly clean dust and rainwater from the seal gaps to prevent aging. Since sand and dust can easily accumulate in the seal gaps, use a brush to frequently clean them, then apply a layer of high-permeability protective agent to prevent seal aging. If the seal is severely damaged or significantly aged, it needs to be replaced with a new one.
5
0
Share

What is On-Demand Four-Wheel Drive?

On-demand four-wheel drive refers to a system where the car primarily operates in two-wheel drive under normal conditions. When a wheel slips and the vehicle cannot move forward, it automatically switches to four-wheel drive. This system automatically shifts between two-wheel and four-wheel drive based on driving conditions without requiring manual intervention. Here is more information about on-demand four-wheel drive: 1. On-demand four-wheel drive differs from part-time four-wheel drive, which requires manual switching between two-wheel and four-wheel drive, and full-time four-wheel drive, which operates in four-wheel drive under all conditions. 2. Since its inception, on-demand four-wheel drive has evolved through roughly three stages, with each stage featuring distinct structures and performance. Initially, due to technological limitations, vehicles equipped with on-demand four-wheel drive could not match the performance of full-time four-wheel drive, whether in terms of off-road capability or handling limits. Their performance was only intermediate between two-wheel drive and full-time four-wheel drive. With advancements in on-demand four-wheel drive technology, the third generation has seen significant improvements in performance, along with substantial changes in its working principles.
4
2
Share

What material is the Elantra spark plug made of?

Elantra spark plugs are NKG iridium-platinum spark plugs. Components of a spark plug: Spark plugs mainly consist of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell. Types of spark plugs: Main types of spark plugs include: standard spark plugs, projected insulator spark plugs, electrode spark plugs, seat spark plugs, pole spark plugs, and surface gap spark plugs. Replacement interval for spark plugs: Under normal maintenance conditions, they should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is recommended to follow the user manual. Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.