What is the size of the cup holder in the BMW 3 Series?

1 Answers
RubyAnn
07/29/25 8:23pm
The size of the cup holder in the BMW 3 Series is approximately 80mm. Common sizes of cup holders: Around 7CM to 8CM. There is no exact standard size for car cup holders, as different brands and vehicle models may vary. Currently, small bottled mineral water, milk tea cups, cold drink cups, and functional beverages like Red Bull available on the market can fit in most cup holders. Number of cup holders: Two to six cup holders, depending on the vehicle model. MPV models generally have six to eight cup holders, while five-seater SUV models typically have four. Usually, there are two cup holders behind the gear shift and two on the rear center armrest. However, when three people are seated in the back, only the front two cup holders remain usable.
Was this review help?
11
5
Share
More Forum Discussions

Why Does an Automatic Transmission Car Make Noise When Shifting Gears?

Here are the reasons why an automatic transmission car makes noise when shifting gears: Shifting gears when the car is not completely stopped: If you shift to P gear before the car comes to a complete stop, the P gear lock hook inside the transmission will hit the gear, making a clicking sound. Incorrect operation sequence when parking on a slope: For automatic transmissions, the P gear relies on the lock hook to secure the gear and keep the car stationary. When parking on a slope, you should first engage the handbrake and then shift to P gear, allowing the handbrake to bear the downward force of the vehicle. Worn transmission gears: The transmission is a precision component, and the gears best reflect its precision. However, due to their tight meshing, wear is inevitable. Over time, larger gaps will form between the gear teeth, causing noise when shifting gears.
7
1
Share

What are the differences between the Reiz 2.5v and Reiz 2.5s?

The differences between the Reiz 2.5v and Reiz 2.5s: 1. Different sunroof configurations: The Reiz 2.5v is equipped with an electronically controlled electric sunroof; the Reiz 2.5s does not have a sunroof. 2. Different seat adjustment methods: The Reiz 2.5v uses electronic switch electric adjustment; the Reiz 2.5s uses manual mechanical adjustment. 3. Different heating methods: The Reiz 2.5v is equipped with air conditioning heating and heating for the front seats; the Reiz 2.5s is equipped with air conditioning heating. The Reiz is the domestic name for the Japanese Toyota MARKx model. It is produced on the same production line as the Crown at Tianjin FAW Toyota Plant II, sharing the same chassis and equipped with the same six-speed automatic transmission as the Crown.
10
1
Share

Can Driving School Vehicles Drive on Highways?

Driving school vehicles can drive on highways. Here is an introduction to the types of vehicles that are not allowed on highways: Non-motorized vehicles: In urban roads, there are lanes for non-motorized vehicles, but on highways where speeds are higher, motor vehicles naturally cannot drive on them. First, the speed of non-motorized vehicles does not meet the requirements for highway driving. Second, the safety configurations of non-motorized vehicles are not up to standard. For safety reasons, such vehicles are prohibited from entering highways. Tractors: Tractors, wheeled special motor vehicles, articulated buses, full trailer trucks, and other motor vehicles with a design speed of less than 70 kilometers per hour are not allowed on highways. Once they illegally enter highways, they become safety hazards, both for themselves and other drivers.
8
3
Share

What Causes the Squeaking Sound When Pressing the Clutch Pedal?

The squeaking sound when pressing the clutch pedal is caused by: 1. Excessive wear of the clutch release bearing; 2. Faulty diaphragm spring; 3. Poor lubrication; 4. Loose or damaged clutch; 5. Broken or excessively worn clutch release levers; 6. Broken adjustment bolts of the release levers. Solutions for the squeaking sound when pressing the clutch: 1. Apply grease to the release bearing; 2. Replace the clutch pedal assembly; 3. Check the working condition of the clutch release levers; 4. Inspect if the clutch springs are damaged. Types of clutches: Electromagnetic clutch, magnetic particle clutch, friction clutch, and hydraulic clutch.
20
4
Share

Is an Exam Required for Upgrading from C1 to B2 License?

An exam is required. If passed, the vehicle management office will issue the new-level driver's license within 7 working days. Below are the detailed conditions for upgrading from C1 to B2: Must have held a motor vehicle driver's license for at least one year; No record of accumulating 12 penalty points in the current scoring cycle and the most recent scoring cycle before application; No history of causing a fatal traffic accident while bearing equal or greater responsibility; No history of drunk driving; Driver's license has not been revoked or rescinded within the past ten years; Age must be between 20 and 60 years. C1 is a code for a type of permitted driving vehicle under the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" (Ministry of Public Security Order No. 123). C1 permits driving small and micro passenger vehicles, light and micro cargo vehicles, and light and micro special-purpose vehicles, and also allows driving vehicles permitted under C2, C3, and C4. B2 license permits driving heavy and medium-duty cargo vehicles or large, heavy, and medium-duty special-purpose vehicles. Heavy and medium-duty cargo vehicles are mainly trucks, such as the large trucks commonly seen on roads carrying construction waste, which fall under heavy trucks. Large, heavy, and medium-duty special-purpose vehicles refer to vehicles equipped with specialized devices or tools, such as sprinkler trucks, concrete mixer trucks, and fire trucks. Article 14 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" states that first-time applicants for a motor vehicle driver's license can apply for permits to drive city buses, large trucks, small cars, small automatic transmission cars, low-speed cargo vehicles, three-wheeled cars, small automatic transmission passenger vehicles for the disabled, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. For those who already hold a motor vehicle driver's license and wish to apply for additional permitted vehicle types, they can apply for large passenger vehicles, tractor trucks, city buses, medium passenger vehicles, large trucks, small cars, small automatic transmission cars, low-speed cargo vehicles, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Article 15 states that those who already hold a motor vehicle driver's license and wish to apply for additional permitted vehicle types must have no record of accumulating 12 penalty points in the current scoring cycle and the most recent scoring cycle before application. This applies to applications for medium passenger vehicles, tractor trucks, and large passenger vehicles. The B2 driver's license exam consists of four subjects: Subject 1 covers road traffic laws and regulations, including road traffic rules, traffic violations, traffic signals, and accident handling. Subject 2 involves operational tests for large passenger vehicles, city buses, and tractor trucks, including pole tests, side parking, hill starts, and single-plank bridge navigation. Subject 3 includes driving preparation, starting, straight-line driving, lane changes, and gear shifting operations for large passenger vehicles, city buses, tractor trucks, and medium passenger vehicles. Subject 4 covers safe and civilized driving requirements, safe driving knowledge for extreme weather and complex road conditions, and accident handling procedures.
8
3
Share

What is the correct way to use a vehicle?

The correct way to use a vehicle is: 1. Daily maintenance: Check engine oil, fuel, gear oil, coolant, front and rear axles of tires, instruments, and various lights; 2. Do not let the engine work under overload conditions: Do not immediately operate at high speed after starting the vehicle. Let it idle for 5 to 10 minutes, wait until the water temperature rises to 45-55 degrees Celsius before allowing the engine to work, and only operate at high speed when the temperature rises above 80 degrees Celsius. Vehicle maintenance items: 1. Replace engine oil, oil filter, air filter, and fuel filter; 2. Check the body and tires; 3. Inspect the braking system; 4. Check for damage to the chassis; 5. Check the level of various fluids.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.