···
Log in / Register

What is the size of the Corolla wiper blades?

3 Answers
McWyatt
07/30/25 12:48am
The Corolla wiper blade size is 26 inches (65CM) + 14 inches (35CM) as a pair. Below is relevant information about wiper blades: 1. Power source: The power source of the wiper blades comes from the motor, which is the core of the entire wiper system. The motor quality requirements for wiper blades are relatively high. It uses a DC permanent magnet motor, and the wiper motor installed on the front windshield is generally integrated with the worm gear mechanical part. The function of the worm gear mechanism is to reduce speed and increase torque, and its output shaft drives the four-bar linkage mechanism, which converts continuous rotational motion into left-right swinging motion. 2. Working method: The wiper motor adopts a 3-brush structure to facilitate speed change. The intermittent time is controlled by the intermittent relay, utilizing the motor's return switch contacts and the charging-discharging function of the relay's resistor-capacitor to make the wiper blades sweep at a certain cycle. The wiper blade rubber is the tool that directly removes rainwater and dirt from the glass.
Was this review help?
9
2
Share
AlexaRose
08/15/25 6:04am
The common size for Corolla wiper blades is 26 inches for the driver's side and 16 inches for the passenger's side, which fits most models after 2014, though earlier versions or modified ones might differ slightly. Having driven for several years, I always measure the length of the old wipers before buying new ones to avoid incorrect sizing, which can lead to poor wiping and compromise driving safety. Especially in rainy conditions, poor visibility increases the risk of accidents. I recommend checking and replacing them annually, while also cleaning the oil film on the windshield. When replacing, opt for reliable brands like Bosch—affordable and effective. Remember, incorrect sizes can damage the wiper arms or cause water streaks. A simple task like this can significantly enhance your driving experience.
Was this review help?
20
3
Share
Expand All
VonAlan
10/20/25 3:21am
Regarding the Corolla wiper blade size, the standard setup is 26 inches for the main driver and 16 inches for the secondary driver. However, it depends on the vehicle year; for example, pre-2010 versions sometimes have a 24-inch main driver, so it's best to check the manual after purchasing. I usually enjoy researching car parts. Mismatched sizes can cause the wiper blades to wear out quickly or not fit the windshield properly, affecting visibility in rainy weather. When purchasing, don't just focus on the inch size; also check if the wiper clip type is compatible with the Corolla's U-hook or straight insert type. It's recommended to use high-quality rubber blades like the Wiper King brand. Replacing them yourself only takes a few minutes, and you can also check if the wiper motor is functioning properly. A little maintenance goes a long way in ensuring peace of mind.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

What is the current designation for 93-octane gasoline?

93-octane gasoline is now referred to as 92-octane gasoline. Below is an introduction to gasoline octane ratings: 1. Standard gasoline is composed of isooctane and n-heptane. Isooctane has good anti-knock properties, with its octane rating set at 100; n-heptane has poor anti-knock properties and is prone to knocking in gasoline engines, with its octane rating set at 0. 2. If the gasoline is labeled as 90, it means that this grade of gasoline has the same anti-knock properties as standard gasoline containing 90% isooctane and 10% n-heptane. 3. For example, 90-octane gasoline ensures that no knocking occurs in engines with a compression ratio not exceeding 9, while 97-octane gasoline ensures no knocking in engines with a compression ratio not exceeding 9.7.
15
4
Share

Is the Subject 1 Exam Available on Weekends?

Subject 1 of the driver's license test cannot be taken on weekends. The written exam for the motor vehicle driver's license (Subject 1) can only be scheduled from Monday to Friday, as weekends are public holidays when driving schools and testing centers are closed. Prior to the exam, candidates need to complete the appointment procedures. Additional Information: 1. Two Attempts Allowed on Exam Day: If a candidate fails the first attempt, they must exit the testing area and wait until the session concludes. They can then re-submit their ID for identity verification to take the second test. Passing the second attempt qualifies them to proceed to Subject 2 training. 2. Exam Retake Policy: There are no limits on Subject 1 exam retakes within the 3-year validity period of the driver's license application. As long as all tests are completed within this timeframe, it will not affect the certification process.
13
3
Share

How to reset the maintenance light on the Zhonghua V3?

To reset the maintenance light on the Zhonghua V3: 1. Turn off the vehicle's ignition button; 2. Press and hold the maintenance reset button on the instrument panel for an extended period; 3. While continuing to hold the maintenance reset button, press the vehicle's start button to power on the car; 4. Release the maintenance reset button when the display shows 0000.0. The Zhonghua V3 is a 5-door, 5-seater compact SUV with dimensions of 4240mm in length, 1803mm in width, 1600mm in height, and a wheelbase of 2570mm. It is equipped with a 1.6L naturally aspirated engine delivering a maximum power of 87kW and peak torque of 150Nm.
3
3
Share

How Much Fuel Should a Car Be Filled With?

Generally, a car's fuel tank should be filled to about 80% capacity. 1. Here are some precautions to consider when refueling: (1) Choose to refuel when the temperature is relatively low. (2) If the car is not used for a long time or used infrequently, maintain a small amount of fuel. (3) Do not refuel when a fuel tanker is unloading. (4) Turn off the engine when refueling a gasoline car. (5) Do not mix gasoline of different octane ratings. 2. Components of the fuel tank: fuel tank cap, baffle plate, fuel gauge sensor, fuel inlet and return pipes, fuel filler neck, and vent. 3. Functions of the fuel tank cap: (1) Record the car model and the type of fuel used. (2) Display the standard tire pressure range and precautions.
14
4
Share

What are the techniques to completely disable the start-stop function in the Tiguan?

The technique to completely disable the start-stop function in the Tiguan is to expose the car to direct sunlight until the temperature exceeds 35 degrees Celsius, then open the engine start-stop disable interface to make the yellow indicator bar reappear. Below is some extended information about the Tiguan: 1. Models: The Tiguan is a vehicle produced by Shanghai Volkswagen. It comes in 7 variants across 4 editions: Urban, Trendline, Comfortline, and Highline. 1. Performance: Equipped with Volkswagen's flagship 1.8TSI and 2.0TSI engines, it delivers outstanding performance in both power and efficiency. The Tiguan's matched 6-speed manual transmission and Aisin 6-speed automatic transmission can better utilize the power, providing vigorous performance while maintaining more environmentally friendly emissions.
16
1
Share

Is the Crankshaft Oil Tank the Engine Oil Tank?

The crankshaft oil tank is not the engine oil tank. The engine oil in a car engine is located in the oil pan at the bottom of the engine, while the crankshaft is positioned above the oil pan. During the actual refueling process, the amount of oil may exceed the calibrated volume. This is because the fuel tank capacity marked by car manufacturers refers to the volume from the bottom of the tank to the safe fill level. There is still some space from the safe fill level to the tank opening, which is reserved to allow for oil expansion when temperatures rise, preventing overflow. If oil is filled up to the tank opening during refueling, the actual refueling amount will exceed the marked tank capacity. Methods to open the fuel tank: Mechanical key opening: This is commonly found in some rugged off-road vehicles. Most modern family cars no longer use this method as it is relatively complicated. In-car switch method: The position of the in-car fuel tank switch varies among different car models. It may be located on the floor near the driver's seat, on the left front door panel, or on the center console, usually marked with a fuel pump icon. However, it's important to note that the in-car switch can easily lead to the driver forgetting to turn off the engine before refueling. Therefore, drivers should always remember to turn off the engine before refueling. Press-to-open method: The press-to-open fuel tank door is currently the most convenient method. The driver only needs to park the car, and the fuel attendant can press to open the tank for refueling. However, when not parked for refueling, drivers should always lock the central control to prevent the fuel tank cap from being opened.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.