What is the size of the Corolla wiper blades?

1 Answers
LaBentley
07/30/25 5:03am
Corolla wiper blades come in a set of 26 inches (65CM) + 14 inches (35CM). Below is relevant information about wiper blades: 1. Power source: The wiper blades are powered by an electric motor, which serves as the core of the entire wiper system. The quality requirements for the motor are quite high. It uses a DC permanent magnet motor, and the wiper motor installed on the front windshield is typically integrated with the worm gear mechanical part. The worm gear mechanism functions to reduce speed and increase torque, with its output shaft driving a four-bar linkage that converts continuous rotational motion into a left-right oscillating movement. 2. Operation method: The wiper motor adopts a 3-brush structure to facilitate speed variation. The intermittent timing is controlled by a relay, utilizing the motor's return switch contacts and the relay's RC charging-discharging function to enable the wiper blades to sweep at regular intervals. The wiper blade rubber is the tool that directly removes rainwater and dirt from the glass.
Was this review help?
11
3
Share
More Forum Discussions

Where are the six airbags located in the Qashqai?

The six airbags in the Qashqai are located on the steering wheel, above the glove box on the passenger side, the left side of the driver's seat, the right side of the passenger seat, and on both doors. Taking the 2021 Qashqai as an example, it is a midsize SUV with body dimensions of 4401mm in length, 1837mm in width, and 1593mm in height, with a wheelbase of 2646mm, a fuel tank capacity of 57 liters, and a curb weight of 1444kg. The 2021 Qashqai features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 151PS, a maximum power output of 111kW, and a maximum torque of 194Nm, paired with a 7-speed continuously variable transmission.
18
4
Share

What is the fog light bulb model for Hyundai Elantra?

The fog light bulb model for Hyundai Elantra is 9006. The fog light source has strong penetration and is used to illuminate the road and provide safety warnings during rainy or foggy weather, improving visibility for the driver and other traffic participants. Taking the 2020 Hyundai Elantra as an example, its body dimensions are: length 4610mm, width 1800mm, height 1450mm, wheelbase 2700mm, trunk capacity 458l, and curb weight 1319kg. The 2020 Hyundai Elantra is equipped with a 1.4T turbocharged engine, with a maximum horsepower of 130PS, maximum power of 95.6kW, maximum torque of 211Nm, and is paired with a 7-speed dual-clutch transmission.
6
5
Share

What is the method for removing the radiator on a Hyundai Santa Fe?

Modern Santa Fe radiator removal method is: 1. Open the car's hood and remove the intake pipe located above the radiator fan; 2. Unscrew the screws on the radiator fan and air conditioning fan. Taking the 2020 Hyundai Santa Fe as an example, it belongs to the mid-size SUV category, with body dimensions of: length 4930mm, width 1910mm, height 1720mm, wheelbase 2865mm, fuel tank capacity 71l, and curb weight 1775kg. The 2020 Hyundai Santa Fe is equipped with a 2.0T turbocharged engine, delivering maximum horsepower of 230PS, maximum power of 169kW, maximum torque of 353Nm, paired with an 8-speed automatic transmission.
7
0
Share

What is the battery model for Hyundai Elantra's key?

The battery model for Hyundai Elantra's key is CR2032. Its working principle is: the key emits radio waves, which are received by the car's antenna. The electronic control unit (ECU) identifies the signal code, and then the system's actuator performs the unlocking or locking action. Taking the 2016 Fashion Edition Hyundai Elantra as an example, its body dimensions are: length 4750mm, width 1775mm, height 1445mm, wheelbase 2700mm, and fuel tank capacity 50L. The 2016 Fashion Edition Hyundai Elantra has a front MacPherson independent suspension and a rear torsion beam non-independent suspension. It is equipped with a 1.6L naturally aspirated engine, with a maximum horsepower of 128PS, maximum power of 94kW, and maximum torque of 156Nm.
6
5
Share

How to Reduce Tire Noise?

To reduce tire noise, the following methods can be adopted: 1. Apply soundproofing materials to the four doors, door edges, wheel arches, fenders, and chassis. 2. Replace with comfort-oriented tires to reduce tire noise. Factors related to tire noise mainly involve the tread pattern. Therefore, comfort tires are designed with noise reduction in mind. This can be achieved by maintaining a constant cross-sectional groove width of the silent ribs around the central tread of the tire, ensuring consistent rigidity of rubber blocks when the tire rotates into the contact area, balanced vibration amplitude of tread blocks, and stable noise waves.
8
2
Share

What are the symptoms of a bad lower control arm?

The symptoms of a bad lower control arm are: 1. The vehicle pulls to one side; 2. The wheels rub against the chassis; 3. The chassis becomes loose and produces abnormal noises; 4. The connection between the control arm and the knuckle becomes too large, making it prone to detachment. The lower control arm is an important component of the chassis suspension system, connecting the body and the wheels elastically. When the vehicle is in motion, the lower control arm elastically connects the axle and the frame, helping to reduce the impact forces during driving. The steps for removing and installing the lower control arm are: 1. Loosen the wheel bolts and lift the vehicle; 2. Loosen the front bolts of the lower control arm; 3. Remove the stabilizer bar bolts; 4. Loosen the rear bolts of the lower control arm; 5. Loosen the lower control arm ball joint bolts; 6. Pry the lower control arm outward to remove it.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.