What is the size of the Chery Tiggo 5 wiper?

2 Answers
Jessica
07/29/25 7:14pm
Chery Tiggo 5 wiper size is: main wiper 24 inches; secondary wiper 18 inches. Introduction to car wipers: Wipers, also known as windshield wipers, are devices used to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and increasing driving safety. Power source: The power source of the wiper comes from the motor, which is the core of the entire wiper system. The quality requirements for the wiper motor are quite high. The wiper uses a DC permanent magnet motor, and the wiper motor installed on the front windshield is generally integrated with the worm gear mechanical part.
Was this review help?
17
5
Share
SanAlexa
08/14/25 1:38pm
As a Chery Tiggo 5 owner, I can tell you the common standards for wiper blade sizes. The driver's side wiper is typically 24 inches (approximately 600mm) long, while the passenger side is 18 inches (approximately 450mm). However, this depends on the specific model year. For example, pre-2015 older models might be slightly shorter. Correct sizing is crucial for driving safety—if the wipers are too long or too short, they may not clean the windshield properly, which can lead to accidents, especially in rainy conditions when visibility is poor. I recommend checking the owner's manual to confirm the size when purchasing a car or having a technician measure it at the shop. When choosing new wipers, pay attention to quality—cheap ones wear out quickly and may freeze in winter, making them ineffective. Regular cleaning and timely replacement of wiper blades can extend their lifespan, after all, safety comes first!
Was this review help?
8
4
Share
Expand All
More Forum Discussions

What Brand is the Bull Logo Car?

The car with the bull logo is Lamborghini. Here is some relevant information: 1. The logo of Lamborghini is a powerful bull charging towards its opponent, which aligns with the characteristics of Lamborghini's high-performance sports cars. It is said that this logo also reflects the founder Ferruccio Lamborghini's indomitable spirit, much like a bull. 2. Automobili Lamborghini S.p.A. is an Italian automobile manufacturer, one of the world's top sports car makers and a symbol of European luxury. The company is based in Sant'Agata Bolognese, Italy, and was founded by Ferruccio Lamborghini in 1963.
15
2
Share

What is the fuel consumption of Toyota Corolla on urban roads?

Toyota Corolla has a combined fuel consumption of 7-8 liters per 100 kilometers on urban roads. Below are specific explanations regarding fuel consumption: 1. Vehicle weight: The car body is relatively large and heavy, leading to higher fuel consumption. 2. Engine displacement: A larger engine displacement provides more power but requires more fuel, resulting in higher fuel consumption. 3. Road conditions: Fuel consumption is lower when driving on highways because the engine operates more stably at lower RPMs. In contrast, driving in congested areas or urban roads with frequent starts and stops leads to higher fuel consumption. 4. Driving habits: Gentle driving results in lower fuel consumption, while aggressive driving increases it.
6
5
Share

What is the speed range for each gear in a car

Manual transmission speed ranges for each gear are as follows: 1st gear 15 to 20 km/h; 2nd gear 25 to 40 km/h; 3rd gear 40 to 60 km/h; 4th gear 60 to 75 km/h; 5th gear above 75 km/h. Functions of manual transmission: Manual transmission (MT), also known as manual gearbox, requires manually shifting the gear lever to change the gear engagement inside the transmission, thereby altering the gear ratio to achieve speed variation. Manual transmission uses shift forks to change the gear ratio (tooth ratio) of meshing gears, consequently modifying the driving torque to suit different operating conditions. Purpose of car gears: While driving, shifting gears enables the engine to operate within its optimal power performance range. All driving conditions have corresponding shift points, with the ultimate goal of reducing fuel consumption.
16
4
Share

What is the air pressure for car tires?

The normal tire pressure for a car is between 2.3 and 2.5 bar, with the maximum not exceeding 3.0 and the minimum not below 2.1. Below is an introduction to tire pressure: Hazards of incorrect tire pressure: Incorrect car tire pressure can affect the lifespan of the tires. If the tire pressure is too high, even if it doesn't cause a blowout, the excessive stretching of the tire rubber can lead to deformation that cannot be restored. Additionally, high tire pressure reduces the contact area between the tire and the ground, which may lower fuel consumption but can also impair the car's braking performance. Precautions for tire pressure: Maintaining proper tire inflation ensures handling, tread longevity, and driving comfort. It is recommended to regularly check the tire pressure, including the spare tire. Even well-maintained tires can lose 10-20 kPa of pressure per month, so regular checks are essential.
12
4
Share

Are Head Airbags Important?

Head airbags are extremely important. Below is an introduction to the functions and structure of head airbags: Functions of Head Airbags: Head airbags primarily protect the occupants' heads during side collisions. Their working principle involves deploying to cover the windows during a collision, preventing the front passengers' heads from directly hitting nearby hard components, cushioning the lateral displacement inertia of the head, and safeguarding the neck and head. In critical moments, they can reduce head injuries. It's important to note that airbags provide the best protection in major accidents only when used in conjunction with seat belts. Structure of Head Airbags: Head airbags, also known as side curtain airbags, are mostly designed in a front-to-rear continuous style. The front head airbags are typically located on the steel beams on both sides of the windshield. They usually consist of an airbag, airbag fabric, gas generator, gas generator bracket, and tubing.
20
1
Share

Should Transmission Fluid Be Changed at a 4S Shop?

Transmission fluid does not necessarily need to be changed at a 4S shop; car owners can change it themselves. The replacement cycle and precautions for transmission fluid are as follows: Replacement Cycle: Under normal circumstances, automatic transmissions should have their transmission fluid changed every 2 years or every 40,000 kilometers. For manual transmissions, it is generally recommended to change the transmission fluid every 3 years or every 100,000 kilometers. Precautions for Replacement: When changing the transmission fluid, it is important to pay attention to the amount of fluid. Too much or too little fluid can damage the car's transmission. Excessive fluid may increase resistance during operation or cause the fluid to foam and deteriorate, leading to abnormal wear of components. Insufficient fluid, on the other hand, may result in a lack of power, sluggish gear shifting, and over time, may cause the transmission to overheat and prevent normal driving.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.