What is the size of the Changan CS55 steering wheel?

Where is the air conditioning filter of the Livina located?

The air conditioning filter of the Livina is located under the dashboard, inside the decorative panel in front of the passenger seat. Poor maintenance of the air conditioning filter can lead to the accumulation of dust and dirt on the filter plate, radiator, evaporator, and fin surfaces, causing airflow blockage. Additionally, the air conditioning system may experience reduced cooling and heating efficiency, increased power consumption, noise, and a shortened lifespan. The Livina is a compact car designed by Nissan, primarily competing with models such as the POLO and Fit. The Livina has dimensions of 4249mm in length, 1695mm in width, and 1577mm in height, with a wheelbase of 2600mm.

19

1

Share

What is the minimum ground clearance of the Orlando?

The minimum ground clearance of the Orlando is 150mm. The determining factors for the Orlando's minimum ground clearance are as follows: 1. Actual vehicle load: The heavier the vehicle load, the smaller the minimum ground clearance. This not only increases the burden on the engine but also reduces the stability of the vehicle while driving. 2. Performance of shock absorber springs: When using aged or damaged shock absorber springs that do not meet performance requirements, the vehicle body may sag to some extent, potentially causing components near the shock absorber springs to be closer to the ground, thus reducing the minimum ground clearance. 3. Tire pressure: If the tire pressure is too low, the overall height of the vehicle will decrease, which also affects the minimum ground clearance.

13

5

Share

What is the most suitable ground clearance for a car?

Car ground clearance between 110 to 130mm is most suitable. The impact of car ground clearance is as follows: 1. The larger the ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven ground, but the higher the center of gravity, which reduces stability; 2. The minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the supporting plane when fully loaded and stationary, used to characterize the car's ability to pass over obstacles such as stones and stumps without collision. The smaller the ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven ground, but the lower the center of gravity, which can increase stability.

16

5

Share

How to Check Vehicle Inspection Time?

Methods to check vehicle inspection time: Look at the duplicate of the vehicle license. For example, if the "Inspection Valid Until April 2019" is indicated on the duplicate of the vehicle license, then the annual inspection date is three months before the inspection validity period (including the current month), meaning the annual inspection date is from February to April 2019. The vehicle annual inspection date is calculated by month, and processing the vehicle annual inspection in the last full month of the validity period is not considered overdue. Annual inspection is a mandatory test for every vehicle that has obtained an official license plate and vehicle license, which means an annual physical examination of the vehicle according to the safety technical conditions for motor vehicle operation. Vehicle annual inspection can promptly eliminate potential safety hazards, urge the strengthening of vehicle maintenance, and reduce the occurrence of traffic accidents.

13

4

Share

How Much Horsepower Does a Motorcycle Have?

Generally, the power of a motorcycle is around 6–7 kW, equivalent to 8–9.5 horsepower. Additional Information: There is no specific standard for motorcycle horsepower, as it depends on how the bike is tuned. A well-tuned 150cc bike can reach speeds of 200 km/h, and the largest displacement motorcycles now reach up to 1600cc. Horsepower was originally defined by the French and Germans, but since the horses used to measure horsepower were smaller than average, an engine with 50 horsepower should not be imagined as 50 horses pulling the motorcycle—35 horses would be a more accurate comparison. The unit of horsepower is represented by (ps), a symbol first used by the Germans and still in use today.

2

Share

What to Do When There's Abnormal Noise During Low-Speed Braking?

Reasons for abnormal noise during low-speed braking include: 1. Overly worn brake pads: The exposed fixing points of the friction material rub against the brake disc or brake drum, causing abnormal noise. Solution: Replace the brake pads. 2. Poor contact surface: After replacing the brake pads, improper contact with the brake disc or drum leads to point or line contact, resulting in abnormal noise. Solution: Perform a break-in period for the vehicle. 3. Water exposure: Brakes may produce abnormal noise after the car has been through water. Solution: Handle according to water drainage, remove accumulated water, and replace the corresponding parts. 4. Wear: Excessive wear on the brake disc or brake drum. Solution: Replace the brake disc or brake drum.

19

1

Share

What is the size of the Changan CS55 steering wheel?

Where is the air conditioning filter of the Livina located?

What is the minimum ground clearance of the Orlando?

What is the most suitable ground clearance for a car?

How to Check Vehicle Inspection Time?

How Much Horsepower Does a Motorcycle Have?

What to Do When There's Abnormal Noise During Low-Speed Braking?

What is SWM car?

Mineral Oil Change Interval?

How to open the trunk of Audi A6L?

What sports car features a dragonfly logo?