What is the size of the Baojun e100 windshield?

Is the jlh-4g20tdj engine from Volvo?

jlh4g20td engine does not belong to Volvo. It incorporates some technology and design from Volvo engines, but it is not entirely a Volvo engine. This engine has a maximum horsepower of 190 hp and a maximum torque of 300 Nm. Introduction to the Lynk & Co 03: 1. Exterior: The front features signature split-type headlights, with a thick front face exuding aggressiveness. The rear of the car is the main highlight of the Lynk & Co 03's appearance, showcasing a very sporty overall style with an exaggeratedly designed rear bumper that enhances its performance appeal. 2. Configuration: It is equipped with full LED headlights, with daytime running lights positioned at the top and high/low beam lights located on either side of the grille, forming an integrated area design. 3. Interior: The Lynk & Co 03 follows the family's interior design, with the central control area significantly tilted towards the driver's seat. The dashboard is wrapped in soft leather material, offering excellent tactile and visual quality. The dark red patterned trim is slightly understated, accentuating the sporty atmosphere.

3

5

Share

Where is the fuel filter located in the Passat?

The Passat fuel filter is located 40 centimeters forward from the rear wheels underneath the vehicle. It is an integrated type, combined with the fuel pump. Before gasoline enters the fuel pump, it must be filtered to ensure the proper functioning of the fuel supply system. Replacement of the fuel filter: Follow the replacement cycle recommended in the car's user manual. Generally, the fuel filter should be replaced every 20,000 kilometers. The method for replacing the fuel filter is as follows: 1. Remove the vehicle key and disconnect the fuel pump fuse or power supply. Remove the rear seat cushion and the cover on the fuel pump to reveal the fuel pump assembly. The fuel pump assembly is secured by a black retaining ring. After disconnecting the wiring harness and fuel line from the fuel pump (prepare a small metal basin when removing the fuel line, as approximately 50ml of gasoline may spray out—use the basin to catch it), use a specialized tool to remove the retaining ring (if no specialized tool is available, a screwdriver and hammer can be used). Once the retaining ring is removed, the fuel pump assembly can be taken out. 2. Replace the corresponding components of the old fuel filter with the new fuel filter assembly. 3. Reinstall the fuel pump assembly with the new fuel filter back into the fuel tank. It is advisable to apply Vaseline to the fuel pump's sealing ring for lubrication to prevent distortion and ensure a tight seal, avoiding fuel or fuel vapor leaks. Then, install the fuel pump's retaining ring and tighten it to the torque specified in the repair manual. Finally, reconnect the wiring harness and fuel line to the fuel pump. Test the vehicle to check for leaks. If no leaks are found, reinstall the seat; otherwise, reseal the sealing ring. 4. Reinstall the replaced fuel pump assembly in its original position. Reconnect the fuel line and replace the cover to complete the process.

6

0

Share

What does it mean when a Mercedes displays 'Check Tire Pressure'?

When a Mercedes displays 'Check Tire Pressure', it means the tire pressure monitoring system is alerting you. The tire pressure monitoring indicator is a yellow symbol—an irregular circle without a seal at the top, with four small spikes at the bottom and an exclamation mark inside. The illumination of this indicator signifies abnormal tire pressure. There are generally three reasons for abnormal tire pressure in a Mercedes: Abnormal tire pressure: The system typically alerts when the pressure is below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure monitoring system is not reset in time, it will continue to display the previously recorded data, causing the tire pressure monitoring indicator to light up. Simply resetting the tire pressure will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving, it can also trigger the tire pressure warning light. In case of sensor damage, the only solution is to replace it with a new one.

1

2

Share

What is the model number of the Verna battery?

It uses a Camel brand, flooded starting lead-acid battery with the model number 6-QW-45MF. Generally, the lifespan of a Verna car battery is 2-3 years, while the original battery in a new car can last over 3 years. If the Verna car battery remains unused for a long time, it will gradually self-discharge until it becomes unusable. Therefore, the car should be started periodically to recharge the battery. Precautions for using the Verna battery: 1. When the ammeter indicates insufficient charge, recharge promptly. The battery's charge level can be reflected on the dashboard. If you find the charge insufficient while driving and the engine won't start, as a temporary measure, you can seek help from another vehicle to jump-start your car by connecting the negative terminals and positive terminals of both batteries. 2. The density of the electrolyte should be adjusted according to standards based on different regions and seasons. 3. When the electrolyte is low, replenish it with distilled water or a specialized replenishing fluid. Never use drinking purified water as a substitute, as it contains various trace elements that can adversely affect the battery.

8

3

Share

What Are the Benefits of Automotive Glass Coating?

Automotive glass coating is a chemical polymer material characterized by high gloss, oxidation resistance, acid and alkali resistance, and UV protection. Here are the benefits of automotive glass coating: 1. Prevents paint oxidation and aging. A genuine glass coating contains no petroleum components and forms a hard inorganic (glass crystal) layer on the paint surface after application, tightly bonding with the paint and never peeling off. It completely isolates the paint from the air, effectively preventing oxidation, discoloration, and other damage caused by external factors. It is heat-resistant. The glass crystal itself has heat-resistant properties, effectively reflecting sunlight and external heat radiation, preventing high temperatures from damaging the paint. 2. Corrosion resistance. The hard inorganic (glass crystal) layer does not oxidize and also protects against corrosion from external factors such as acid rain, insects, and bird droppings. The dense glass crystal layer has superior corrosion resistance, effectively preventing damage from acidic substances like acid rain while also preventing paint fading. Easy to clean. The ionic coating has excellent self-cleaning and water-repellent properties, making it less likely to accumulate dust and dirt. Cleaning requires only water to achieve a high level of cleanliness and gloss.

3

2

Share

How to Adjust the Seat to the Right Position?

Adjusting the height of the car seat should take into account various factors such as the driver's height, arm length, and the distance between the steering wheel and the body. Below are the relevant details for seat adjustment components: 1. Seat Height Adjustment: Car seat adjustments can be either manual or electric, and the functionality may vary depending on the vehicle's configuration. Upon entering the car, the first step is to adjust the seat height. Many novice drivers, afraid of not seeing the front of the car, tend to set the seat height too high to gain more visibility. However, an excessively high seat can actually impair distant visibility. 2. Seat Forward/Backward Adjustment: If the seat is too far, the feet may not reach the pedals; if too close, the legs may feel cramped and uncomfortable. Adjusting the forward/backward distance of the seat can be tricky since everyone's body proportions differ, and there is no one-size-fits-all standard. However, when adjusting, always remember this principle: the feet should fully depress the clutch and brake pedals; when holding the steering wheel, the arms should be slightly bent.

20

4

Share

What is the size of the Baojun e100 windshield?

Is the jlh-4g20tdj engine from Volvo?

Where is the fuel filter located in the Passat?

What does it mean when a Mercedes displays 'Check Tire Pressure'?

What is the model number of the Verna battery?

What Are the Benefits of Automotive Glass Coating?

How to Adjust the Seat to the Right Position?

Where is the fuel tank switch of Haval M6 Plus?

What to Do When the Golf Key Won't Turn

Does the BMW 5 Series have ambient lighting?

What is the Principle of Engine Start-Stop?