What is the size of Accord wiper blades?

2 Answers
DelFinn
07/24/25 5:28am
The wiper blade size on the driver's side of the Accord is 24 inches, while the size on the passenger side is 18 inches. The wiper is a blade structure installed in front of the windshield, consisting of a motor, reducer, four-bar linkage, wiper arm spindle, wiper blade assembly, etc. Its function is to remove rain, snow, and dust that obstruct the view on the windshield, improving the driver's visibility and enhancing driving safety. The Accord is a mid-size car under Honda, with a body structure of a 4-door, 5-seater sedan. The vehicle dimensions are 4893mm in length, 1862mm in width, and 1449mm in height, with a wheelbase of 2830mm. The suspension system adopts MacPherson independent suspension and multi-link independent suspension.
Was this review help?
8
4
Share
McFaith
08/11/25 1:09am
My 10th-gen Accord's front wipers are 26 inches for the driver side and 18 inches for the passenger side, and these sizes have worked perfectly for three years. Actually, wiper sizes really depend on the model year. Most pre-8th-gen cars came with 24+17 setups, while the 9th-gen popularized 26+19 combinations. The 10th-gen basically standardized the 26+18 configuration. When buying wipers, always confirm the connector type—most mainstream options use U-hooks or vehicle-specific clips. Last time I tried to save money and bought a pair with incompatible connectors that simply wouldn’t install. I recommend noting down the size numbers printed on the inner side of the OEM wipers for accuracy, or just ask the seller to ship based on your car’s model year. When replacing them, remember to place a towel on the windshield—the wiper arm can snap down with surprising force.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

What Causes No Crankshaft Signal in an Engine?

No crankshaft signal in an engine may be due to damage to the crankshaft sensor or camshaft sensor. The following are methods for daily engine maintenance: 1. Regularly clean the crankcase: During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. When the amount is small, it remains suspended in the oil; when large, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Additionally, oil oxidation at high temperatures can form varnish and carbon deposits that stick to the pistons, increasing fuel consumption and reducing power, and in severe cases, causing piston rings to seize and cylinder scoring. Therefore, regularly use a high-efficiency, fast-acting cleaning agent for the lubrication system to clean the crankcase and maintain engine cleanliness. 2. Regularly remove carbon deposits from the car: Carbon deposits are inevitable during fuel combustion. Excessive carbon deposits can lead to difficulties in starting, unstable idling, poor acceleration, backfiring during rapid acceleration, excessive exhaust emissions, and increased fuel consumption, all of which adversely affect the engine. To prevent carbon buildup, maintain good driving habits such as frequently driving at high speeds, appropriately increasing shift RPMs, avoiding prolonged idling, and using clean gasoline. 3. Regularly replace coolant: Coolant, short for antifreeze coolant, prevents freezing and cracking of the radiator and engine cylinder block or head in cold winter conditions. Many believe coolant is only for winter use, but it should be used year-round. In winter, it prevents freezing, and in summer, it avoids overheating. Original coolant typically needs replacement every 2 years or 60,000-80,000 kilometers, after which annual replacement is recommended. When selecting coolant, choose a product with a freezing point about 10°C lower than the lowest temperature in the vehicle's operating area. Always use the same type when adding coolant; mixing different types is not allowed.
10
2
Share

Which Motorcycle Modifications Are Legal and Can Pass Inspection?

Modifications that alter the main performance parameters or distinctive identifying features of a vehicle are considered illegal modifications. Examples include replacing the original motorcycle horn with a multi-tone horn or installing a subwoofer. Below is relevant information about motorcycles: Types of Motorcycle Licenses: Currently, there are three types of motorcycle licenses in China—F, E, and D. An F license only permits riding lightweight motorcycles with an engine displacement below 50CC, but this type of license is rarely pursued. An E license allows riding any two-wheeled motorcycle without displacement restrictions, while a D license permits riding all two-wheeled and three-wheeled motorcycles. Therefore, holding an E license enables riding all two-wheeled motorcycles, as there is no separate license for large-displacement motorcycles. Concept of a Motorcycle: A motorcycle is a two-wheeled or three-wheeled vehicle powered by a gasoline engine, steered by handlebars for front-wheel turning. It is lightweight, flexible, and fast, widely used for patrols, passenger and cargo transport, and also serves as sports equipment.
7
0
Share

What does original paint mean?

Original version refers to the fact that the vehicle's body panels have not been replaced for any reason, meaning all the body panels are factory-original. Original paint means that no part of the vehicle's body has undergone any repainting, whether full or partial repainting. Original paint, also known as lead paint, is made by grinding and mixing pigments (white lead powder) with drying oil (linseed oil). It requires the addition of fish oil, solvents, and other diluents before use. This type of paint has a soft film, excellent adhesion to topcoats, strong coverage, and is the lowest-grade oil-based paint. It is suitable for low-demand construction projects or pipe joints and is widely used as a primer for wooden objects, as well as for mixing oil stains and putty. When washing the car, it should be done after the engine has cooled down. Avoid washing the vehicle under direct sunlight or high temperatures to prevent the cleaning agent from drying and leaving marks. For regular DIY car washing, use specialized detergents and neutral water. Avoid using highly alkaline detergents like laundry powder, soap water, or dishwashing liquid, as they can strip the protective oils from the paint and accelerate its aging.
19
5
Share

Why does the car not move when shifted to D gear?

Check if the transmission fluid level is too low, whether the main oil pressure and gear oil pressure are normal, and then check if the gear switch signal is normal, if the wiring from the transmission computer to the shift solenoid valve is in good condition, and if the gear solenoid valve is functioning properly. If none of these are issues, it indicates a problem with the internal control system of the transmission, requiring disassembly of the transmission to inspect the internal components. Below is some related information: Automatic transmission: As the name suggests, it does not require the driver to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Generally, automatic transmission cars have six gear positions, from top to bottom: P, R, N, D, S, L. Driving needs: Driving an automatic transmission car only requires the use of the parking gear P, reverse gear R, neutral gear N, and drive gear D to fully meet the needs of general driving. However, in some special driving environments, other functional gears may be needed. Therefore, if the correct control method is chosen, an automatic transmission car can perform better than a manual transmission.
1
0
Share

Can a Mortgaged Car That Cannot Be Transferred Be Purchased?

Mortgaged cars with debt transfer rights can be purchased. Cars with debt transfer rights are purchasable because, during the mortgage period, the original owner cannot fulfill their debt obligations, and the mortgage company has to dispose of the car at a low price. This is because mortgaged cars are not about a sale relationship but a debt transfer relationship. After a car is mortgaged, it temporarily belongs to the mortgage company. Without the cancellation of the mortgage agreement, even if the car is purchased, it cannot be transferred. Below is relevant information: Debt assignment is non-formalistic: Once the creditor and the third party reach an agreement on the assignment of the debt, the debt assignment contract is established. Except where laws and administrative regulations require approval or registration procedures, no special contract form is necessary. Whether the debt assignment contract is in written form does not affect its validity. For debts that already have debt certificates, the delivery of the debt certificate is required, but this act is part of fulfilling the collateral obligation rather than a condition for the establishment of the debt assignment. Debt assignment is abstract: Debt assignment arises from various reasons, possibly based on sales, gifts, or substitution of performance, but regardless of the reason and its validity, it does not directly affect the validity of the debt assignment contract. This is the abstract nature of the creditor's rights. The purpose of this abstract nature is to ensure the security of debt circulation and the interests of bona fide assignees.
1
5
Share

Can a Driving License Be Reissued in a Different Location?

A driving license cannot be reissued in a different location. To reissue a driving license, you must go to the vehicle management office under the jurisdiction of the address recorded in the identity document of the vehicle owner, which is the vehicle management office where the vehicle was registered. If you cannot personally go to the registration location to reissue the license, you may entrust a relative or friend to handle it on your behalf, along with a business power of attorney signed by you. Below is the relevant information: Motor Vehicle Driving License: The motor vehicle driving license is the legal document that permits a motor vehicle to drive on roads within China. The driving license consists of three parts: the license holder, the main page, and the supplementary page. The front of the main page contains the stamped license core, while the back features a photo of the vehicle, sealed in a plastic cover. The supplementary page is the stamped license core. The motor vehicle driving license held by the driver records many important details, including the license plate number, owner's name, vehicle model and type, engine number and chassis number, load capacity or passenger capacity, initial registration date, and annual inspection records. Reissuance Process: Mail the vehicle owner's identity document and standard vehicle photos to the agent; the agent should bring these materials along with their own identity document to the vehicle management office to apply for a replacement; receive and fill out the application form, then submit the form along with the relevant materials to the staff for review.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.