What is the size of a driver's license photo?

1 Answers
PiperLynn
07/30/25 5:24am
The photo for a car driver's license should be a one-inch white background. Here is the relevant information: Requirements for motor vehicle driver's license photos: The photo must be taken within 6 months before the applicant applies for the driver's license. The photo should be a straight-edged, front-facing, color, bareheaded, single-person half-length ID photo without a hat, scarf, uniform, or colored glasses. For those with long hair, both ears should be visible, and the head or face should not have any tilting, turning, heavy makeup, or accessories that affect facial feature recognition. The background color should be white, the portrait should be clear, with rich layers and natural expression, without obvious distortion. The photo size should be 32mm×22mm, with a head width of 14mm~16mm and a head length of 19mm~22mm. Requirements for the electronic photo information: The photo must be larger than 50KB and smaller than 1MB in jpg format, with a resolution of ≥300dpi; electronic files cannot be scanned or rephotographed; the electronic photo information of the driver must meet the standard size.
Was this review help?
7
5
Share
More Forum Discussions

How Long Does It Take for a Motorcycle to Complete the Break-in Period?

New motorcycles generally have a break-in period of 1,500 kilometers. Oil Change Method During the Initial Break-in Period: There are various methods for changing the oil within this 1,500-kilometer range. It is recommended to change the oil at 300 kilometers, 600 kilometers, 1,000 kilometers, and 1,500 kilometers. How to Ride the Motorcycle During the Initial Break-in Period: For the first 600 kilometers, maintain the gear speeds as follows: first gear at 10 km/h, second gear at 20 km/h, third gear at 30 km/h, fourth gear at 35 km/h, and fifth gear at 40 km/h. Shift gears repeatedly, moving from first to fifth gear and then back down from fifth to first gear.
6
3
Share

Why is there a noise when rotating the rear wheel of a motorcycle?

The reasons for noise when rotating the rear wheel of a motorcycle: bearing damage, severe wear of components. Bearing damage: Lift the motorcycle stand, stand on the side with the chain and sprocket, hold the rear shock absorber with your left hand, grab the rear wheel with your right hand, and swing the rear wheel left and right (i.e., move it toward the left and right shock absorbers). If you feel a gap between the rear wheel and the rear axle (i.e., the rear wheel seems to wobble left and right), it indicates the bearing is faulty and needs replacement. Severe wear of components: The clutch is excessively worn and should be replaced promptly; the pulley is severely worn; gear wear (caused by insufficient oil in the gearbox or long-distance driving); wear of the rear drum brake.
14
0
Share

Can Headlight Modifications Cause Spontaneous Combustion?

Headlight modifications are the most common cause of vehicle spontaneous combustion, especially when installing low-quality aftermarket HID (xenon) lights. This is because HID lights generate extremely high temperatures, while the headlight housing has a limited heat resistance. In particular, the reflective panels inside the housing can easily melt, leading to vehicle fires. Ensure neat wiring during modification: Avoid excessively long or dangling wires and friction from movement. All electrical connections must be secure and properly insulated. Avoid installing excessive decorative lighting: By carefully handling every detail during the modification process and taking thorough safety precautions, spontaneous combustion can be prevented. After all, apart from the initial high current during startup, HID lights generally operate at lower wattage compared to halogen bulbs.
13
1
Share

Where is the turn signal flasher located in the Toyota Vios?

The turn signal flasher relay in the Toyota Vios is located at the rear of the instrument panel and can be seen after removing the instrument panel cover. Turn signals are important indicator lights that are activated when a motor vehicle is turning to alert surrounding vehicles and pedestrians. Taking the 2021 Toyota Vios as an example, it belongs to the compact car category with body dimensions of: length 4435mm, width 1700mm, height 1490mm, wheelbase 2550mm, fuel tank capacity 42l, and curb weight 1070kg. The 2021 Toyota Vios is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 110ps, maximum power of 81kw, maximum torque of 138nm, and is paired with a 5-speed manual transmission.
1
0
Share

What lights to use on sharp turns?

When driving through sharp turns, slopes, arched bridges, crosswalks, or intersections without traffic signal control at night, motor vehicles should alternately use high and low beams to signal. Here is a brief introduction to high and low beams: High beam: The intensity of the light is adjusted based on the distance of the filament. The high beam is focused, emitting parallel light that is more concentrated and brighter, capable of illuminating distant and high objects. Low beam: The low beam is positioned beyond the focal point, between 1x to 2x the focal distance, emitting light in a divergent pattern that illuminates a larger area at close range. The illumination distance of the low beam is approximately 30-40 meters.
9
5
Share

Why does the CFMOTO 650 have weak acceleration?

Reasons for weak acceleration in CFMOTO 650: Fuel supply system malfunction, electrical circuit issues. Fuel supply system malfunction: Insufficient fuel leads to lean air-fuel mixture, resulting in inadequate piston thrust after ignition combustion, prolonged combustion time, and engine overheating. Excessive fuel causes rich air-fuel mixture, leading to weak acceleration at low speeds. A rich mixture lacks sufficient oxygen during combustion, resulting in incomplete combustion, reduced power output, poorer fuel economy, and excessive carbon buildup that can clog exhaust systems, exacerbating the weak acceleration phenomenon. Electrical circuit issues: High-voltage interruption: Malfunctions in the ignition system's high/low voltage components or wiring can cause intermittent high-voltage sparking, leading to uneven engine operation and weak acceleration. Weak or reddish high-voltage spark: Faults in ignition circuit components or wiring can cause insufficient high-voltage electricity, resulting in poor engine performance.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.