What is the situation when a car burns coolant?

2 Answers
FranciscoFitz
07/24/25 5:10pm
Generally, it takes 3-7 days to check traffic violations after they occur, and the latest should not exceed 13 working days. Time for checking violations in different locations: For violations in different locations, it takes 7-10 days to check. According to regulations, the traffic management department should verify and input the violation information into the system within a maximum of 13 working days. This means that violations can be checked within 15 days at the latest. Notification via SMS after a violation: After a violation, you will usually receive an SMS notification or a letter notification. Follow the time specified in the notification to go to the designated place for processing. The methods for handling violations are nothing more than online processing or going to the vehicle management office for processing.
Was this review help?
13
2
Share
VonJohn
08/11/25 9:30am
I've been driving for over a decade and have seen plenty of cases like this. Coolant loss, simply put, means the coolant is mysteriously decreasing. There are three common causes: First, a leak in the system—such as a crack in the radiator, aging hoses, or worn water pump seals—causing fluid to drip onto the ground. Second, internal engine issues, like a blown head gasket, which allows coolant to leak into the combustion chamber and burn off, resulting in white exhaust smoke and rapid coolant level drops. Third, minor problems like a faulty radiator cap seal, which lets coolant evaporate. If not repaired promptly, minor issues can escalate to overheating, steam warnings, or even severe engine damage like cylinder scuffing or total failure. My advice: if you notice low coolant levels, stop to check for wet spots or unusual smells, and visit a professional shop early for a pressure test and repairs. Prevention is key—don’t ignore it and risk major damage just to save time.
Was this review help?
19
0
Share
Expand All
More Forum Discussions

What are the reasons why a Mercedes-Benz won't start?

There are many reasons why a Mercedes-Benz won't start. Starting failure due to incorrect gear position: When parking and turning off the engine, if the gear is not shifted to P position but left in D position. This is because the engine cannot be started when the gear is in D or R position; it can only be started when in P or N position. Therefore, when attempting to start the car again, it fails to ignite. Empty fuel tank in Mercedes-Benz vehicles: Apart from a dead battery preventing the car from starting, running out of fuel will also make it impossible to start. Usually, this situation occurs when the engine is left running while exiting the vehicle, leading to complete fuel consumption and battery drain, thus making the car unable to start.
16
0
Share

Is there 92-octane gasoline available abroad?

Most gas stations in the U.S. offer fuel grades ranging from 87 to 93 octane. Introduction to fuel consumption: It generally refers to the amount of gasoline consumed by a vehicle per 100 kilometers, serving as a theoretical indicator for the vehicle. Methods to reduce fuel consumption: The longer the idling time when parked, the greater the fuel consumption, so minimize idling time; also, avoid rapid acceleration, slamming the gas pedal, and driving at lower engine speeds. Factors affecting fuel consumption: Various driving conditions such as acceleration, deceleration, braking, and engine idling, as well as load capacity, ambient temperature, and whether the air conditioning is on, can all impact a vehicle's fuel consumption.
17
2
Share

Will modifying the camber angle cause severe tire wear?

Barley's tires cannot be flipped inside out, and tire rotation can only be done front to back, not cross-rotated. Tire introduction: Tires are rubber products, so even if not used, they will naturally age. Before using stock tires, it is necessary to check for cracks and rubber aging. Tire storage: If stored in a suitable environment with constant temperature and away from light, the aging process of rubber will slow down significantly. Using them after a few years is not a problem. If stored in a place with direct sunlight and large temperature variations, causing rubber to age and crack, even if unused, they are not suitable for use. Rubber that has lost its elasticity cannot provide the necessary grip.
6
0
Share

Why does the new car lack power when accelerating in first gear?

1. Pay attention to fuel pressure and lubricant quality when experiencing lack of power in first gear. Fuel pressure: To ensure normal engine starting, the residual fuel pressure in the fuel system after engine shutdown should not be lower than 2.5-3.5 kg/cm². Otherwise, insufficient pressure will prevent the fuel injector from spraying enough fuel for starting. If you repeatedly turn the ignition switch at this time, the fuel pressure will return to normal, making starting much easier. Lubricant quality: When winter comes, it's necessary to replace various lubricants in time, including engine oil, transmission oil, and power steering fluid. This is because ordinary lubricants become more viscous in winter, with poorer fluidity, leading to increased frictional resistance during component movement and making cold engine starting difficult. You can choose engine oil with slightly lower viscosity to reduce mechanical wear and protect the engine.
13
4
Share

What is the fuel consumption of the Volkswagen 1.6 Sagitar manual transmission?

The official comprehensive fuel consumption of the Sagitar 1.6 manual model is 6.5L/100km. The main factors affecting vehicle fuel consumption are: 1. Good vehicle condition is the foundation of fuel efficiency: In addition to regular cleaning, proper maintenance is crucial, such as lubricating wheel hub bearings on time, replacing air filter elements periodically, and promptly checking the condition of the vehicle's brakes. 2. Incorrect driving habits can double fuel consumption: As cars become more common in households, the number of non-professional drivers has increased. Some drivers' poor habits can lead to higher fuel consumption. 3. Road conditions significantly determine fuel consumption: Experts estimate that driving in urban conditions increases fuel consumption by 20% compared to driving on test tracks. The biggest factor affecting fuel consumption in city driving is frequent starts, stops, gear shifts, accelerations, and decelerations caused by traffic congestion. Driving on poor road surfaces also increases fuel consumption.
3
1
Share

What brand is the Qoros 3?

The Qoros 3 is a new product from QOROS. Below is an introduction to the Qoros 3's interior and powertrain: Qoros 3 Interior: The Qoros 3 offers a very spacious interior. The entire center console is minimalist, featuring an 8-inch touchscreen display in the middle. The car is equipped with an in-vehicle infotainment system developed by Qoros, allowing the driver to use various functions by swiping fingers on the system's interface. Qoros 3 Powertrain: The Qoros 3 offers two 1.6-liter engine options, both equipped with variable valve control technology. In terms of the transmission system, both engines can be paired with either a 6-speed manual transmission or a 6-speed dual-clutch transmission.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.