What is the signal for a car to slow down?

What are the reasons for BMW's cold engine shaking and stalling?

The reasons for BMW's cold engine shaking and stalling are: 1. Severe engine carbon buildup; 2. Ignition system malfunction; 3. Unstable oil pressure; 4. Aging engine components. Solutions for BMW's cold engine shaking and stalling: 1. Clean the fuel system and check the idle control valve for carbon buildup; 2. Replace the spark plugs; 3. Check the oil pressure and replace components; 4. Replace the engine's shock absorption system. BMW models include: BMW X3, BMW 5 Series, BMW X5, BMW M2, BMW M8, etc. Taking the 2020 BMW M8 as an example, it belongs to the full-size car category with body dimensions of length 5104mm, width 1943mm, height 1420mm, wheelbase 3027mm, fuel tank capacity 68L, and trunk capacity 440L.

1

3

Share

Why is one side of the Highlander's air conditioning cold while the other side is hot?

The Highlander's air conditioning being cold on one side and hot on the other is due to a malfunction in the air conditioning system. Here are some related details about air conditioning: 1. Definition of air conditioning zones: Based on load analysis, the entire air conditioning area is divided into several temperature control zones according to the differences in air conditioning loads. The purpose of zoning is to enable the air conditioning system to effectively track load changes, thereby improving indoor thermal environments and reducing air conditioning energy consumption. 2. Function of car air conditioning: It can cool, heat, ventilate, and purify the air inside the car, providing a comfortable environment for passengers and reducing driver fatigue, thereby improving driving safety. It generally includes refrigeration devices, heating devices, and ventilation devices.

2

5

Share

Does Severe Water Shortage and Overheating Significantly Affect the Engine?

Consequences of engine water shortage and overheating: 1. Air charge coefficient: Leads to decreased air charge coefficient in the engine. Higher temperatures result in lower air density, reducing the engine's actual air intake. 2. Air charging capability: Due to engine overheating, the temperature under the hood increases, diminishing the engine's air charging capability. 3. Engine performance: Can cause abnormal combustion in the engine, making it prone to knocking and reducing engine power. 4. Thermal degradation: Causes thermal degradation of various engine component materials and also affects the clearances between engine parts. Below is an introduction to the aftereffects of engine water shortage and overheating: Under normal circumstances, when the engine experiences water shortage and overheating, the water temperature warning light on the vehicle's dashboard will illuminate. If the owner notices this situation and takes correct measures, such as stopping further driving, there generally won't be any serious aftereffects after repairs.

7

3

Share

Can ETC be attached to the black dots?

ETC devices can be installed on the black dots of the windshield, as long as they do not obstruct the driver's view and can sense the detection equipment of toll stations. However, installing them outside the black dots on the windshield also has drawbacks, as the solar charging capability of the ETC device may weaken, potentially leading to power depletion over time. Correct installation positions for ETC: For small vehicles such as cars and vans, the ETC card and OBU device should be installed on the upper middle part of the front windshield. For large vehicles like trucks and buses, the installation position is on the lower middle part. ETC installation requirements: the height should not be lower than 1.2 meters or higher than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane). The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly illuminate. The OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then peel off the protective film on the back of the OBU and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is inserted into the OBU device.

16

5

Share

Can the original owner lock the vehicle records if the ownership is not transferred?

If the vehicle ownership is not transferred, the original owner cannot lock the records, but they can file a record with the vehicle management office to indicate that they are not the actual user or controller of the vehicle. If the vehicle has been delivered to the buyer and there is a sales contract between the parties, but the buyer refuses to complete the transfer, the seller can file a lawsuit against the buyer in the local court based on the sales contract, demanding the buyer to cooperate in completing the transfer procedures. Below is the relevant content introduction: "Regulations on the Registration of Motor Vehicles": Article 18 When the ownership of a registered motor vehicle is transferred, the current owner shall apply for the transfer registration with the vehicle management office at the place of registration within 30 days from the date of delivery. Before applying for the transfer registration, the owner shall settle all traffic violations and accidents related to the vehicle.

9

2

Share

Why is one side larger than the other when reversing into a parking space?

The main reason for one side being larger than the other when reversing into a parking space is the incorrect timing of steering wheel operation. Here are the relevant explanations: 1. Steering too early: When the steering wheel is turned too early during right-side reverse parking, the wheels will be closer to the corner of the parking space, resulting in a left-wide and right-narrow situation after parking. 2. Steering too late: When the steering wheel is turned too late, it will cause a left-narrow and right-wide situation after parking. 3. Reverse parking: Also known as reverse pole or pole test, it is an assessment point in driver's tests where the examinee must correctly reverse the vehicle into a garage from both sides while moving, mainly evaluating the driver's ability to operate the vehicle in confined spaces and their spatial awareness during vehicle movement.

6

4

Share

What is the signal for a car to slow down?

What are the reasons for BMW's cold engine shaking and stalling?

Why is one side of the Highlander's air conditioning cold while the other side is hot?

Does Severe Water Shortage and Overheating Significantly Affect the Engine?

Can ETC be attached to the black dots?

Can the original owner lock the vehicle records if the ownership is not transferred?

Why is one side larger than the other when reversing into a parking space?

Is it necessary to install a reverse radar when you already have a reverse camera?

What engine does the BYD Yuan have?

How to Use the Jack for the Magotan?

What to Do If Your Driver's License Inspection Has Expired?