What is the sign for a high-occupancy vehicle lane?

1 Answers
Tess
07/29/25 5:07pm
High-occupancy vehicle lane sign color: Typically white on a blue background. The high-occupancy vehicle lane sign indicates that the lane is only for vehicles with multiple occupants. The high-occupancy vehicle lane sign complies with Articles 38, 68, 6, and 3 of the Road Traffic Law of the People's Republic of China, which stipulate legal consequences for traffic violations related to directional signs, directional markings, prohibitory signs, warning signs, and other road traffic violations indicated by such signs. Precautions for driving on highways are as follows: 1. Safety check: Check for potential safety hazards before getting in the car. Before driving on the highway, you should inspect your vehicle for any safety risks. 2. Wear seat belts: Always wear seat belts on the highway, including the driver, front passenger, and rear seats. Avoid placing loose items in the car.
Was this review help?
4
0
Share
More Forum Discussions

What are the main penalty points for C1 Subject 2?

C1 Subject 2 examination penalty standards are: not following the prescribed route sequence when reversing into the garage, 100-point deduction; not completely reversing into the garage, 100-point deduction; vehicle body crossing the line, 100-point deduction; stopping midway, 100-point deduction. During right-angle turns, any wheel pressing the road edge line results in a 100-point deduction; stopping midway, 100-point deduction. For parallel parking, after the vehicle stops in the garage, if the body crosses the line, 100-point deduction; wheels touching or pressing the lane boundary line while moving, 10-point deduction; not parking within the garage, 100-point deduction; not turning on the left turn signal when starting, 10-point deduction; not turning on the right turn signal when reversing, 10-point deduction; stopping midway, 100-point deduction. For curve driving, wheels pressing the edge line, 100-point deduction; stopping midway, 100-point deduction. For fixed-point parking and slope starting, not parking at the fixed point, 100-point deduction; after the vehicle stops, if the front bumper does not reach the control line, 100-point deduction; rolling back more than 30 cm after stopping, 100-point deduction; rolling back less than 30 cm after stopping, 10-point deduction; not turning on the left turn signal when starting, 10-point deduction; pressing the solid edge line of the road while moving, 100-point deduction; after the vehicle stops, if the front bumper does not reach the parking line, 10-point deduction; when parking, if the right front wheel is more than 30 cm from the edge line, 10-point deduction; taking more than 30 seconds to start, 100-point deduction. Age requirements for C1: The minimum age limit for a C1 driver's license is 18 years old, with no upper age limit. However, applicants over 70 years old must pass tests on memory, judgment, and reaction abilities.
11
2
Share

What engine does the Cadillac XT4 have?

Cadillac XT4 engine is produced by SAIC General Motors and is a domestically manufactured engine. The Cadillac XT4 engine model is the latest eighth-generation Ecotec series engine, with a maximum power of 172KW, a maximum torque of 360Nm, and a maximum horsepower of 234. For daily maintenance of the Cadillac XT4 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through, it may burst the filter or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while large amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
3
1
Share

What does it mean when the dashboard displays an oil can with a drop of oil?

When the dashboard displays an oil can with a drop of oil, it indicates an engine oil pressure warning, which is caused by abnormal oil pressure. In such a situation, you should check whether there is sufficient engine oil in the engine. Engine oil, motor oil, or engine lubricant is a substance enhanced with additives in base oil, primarily containing anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers. The dashboard is a rigid panel or structural component used to mount instruments and related devices. Dashboards can be categorized by type into: screen-type dashboards, frame-type dashboards, passage-type dashboards, and cabinet-type dashboards.
8
4
Share

Why does the indicator light still stay on after releasing the air brake?

When the indicator light remains on after releasing the air brake, it may be due to poor circuit contact or the brake not being fully released. The air brake is a type of braking system. In automobiles, a series of specialized devices that apply a certain force (primarily on the road surface) to specific parts of the vehicle (mainly the wheels) to enforce a certain degree of braking are collectively referred to as the braking system. The car's brake pedal is located below the steering wheel. Pressing the brake pedal activates the brake lever linkage, which transmits pressure to the brake shoes on the brake drum, clamping the brake disc and causing the vehicle to decelerate or stop. The manual brake in a car is located beside the gear shift and is connected to the brake lever.
8
0
Share

Why does the door unlock motor make a squeaking sound?

Door unlock motor squeaking is due to prolonged use, causing the hinges to make noise. At this time, adding lubricating oil can keep the pulley smooth and eliminate the noise. Additionally, the door and the car body are connected by a door stopper. Open the door to its maximum angle, clean the grease and dirt from the stopper arm, stopper pin shaft, and connecting bracket surfaces, then apply an appropriate amount of grease to the upper and lower surfaces of the arm to eliminate the noise. Also, check if the door seal has aged, as aging can cause friction noise. Cleaning the dust and rainwater from the seal gaps or replacing the seal can prevent aging.
20
0
Share

What is the maintenance interval for the Buick LaCrosse?

The maintenance interval for the Buick LaCrosse is 2 years or 60,000 kilometers, with different intervals for specific components. Below are the detailed maintenance intervals for the Buick LaCrosse: 1. Under normal driving conditions: Under normal driving conditions, the Buick LaCrosse has fixed maintenance intervals for its components. The throttle body should be inspected every 10,000 kilometers, spark plugs replaced every 20,000 kilometers, engine oil level checked every 3,000 kilometers, automatic transmission fluid replaced every 80,000 kilometers, brake fluid replaced every 30,000 kilometers, and suspension and steering system components inspected every 10,000 kilometers. 2. Under severe driving conditions: Under severe driving conditions, the maintenance intervals should be shortened as required.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.