What is the Sienna?

What is the transmission model of the Classic Sylphy?

The Nissan Sylphy Classic manual version is equipped with a manual transmission, while the automatic version uses a CVT continuously variable transmission. The CVT model is Jatco-JF015E. Below is an introduction to the transmission of the Nissan Sylphy: 1. XTRONIC-CVT Continuously Variable Transmission: The Nissan Sylphy uses the XTRONIC-CVT continuously variable transmission, model Jatco-JF015E. Similar to the original CVT1 series transmission which only had the JF009E model, the CVT7 series currently only has the JF015E model. The most significant feature of this series is the use of a sub-transmission structure, which provides the world's largest gear ratio range. This allows the engine speed to be maintained within a more economical range across a wider speed spectrum, resulting in better fuel efficiency. 2. CVT7 Series: The CVT7 series has also achieved miniaturization and weight reduction of the pulleys, reducing weight by 13%. Its torque converter is flatter in shape compared to the CVT1, achieving a 10% reduction in volume and shortening the transmission length. Additionally, by reducing oil stirring resistance and improving the efficiency of the oil pump, this transmission further enhances the optimization of engine fuel efficiency.

19

1

Share

Should the turn signal be turned off automatically or manually in the right-angle turn of Subject 2?

Manually. When entering the right-angle turn, there will be a voice announcement saying 'Please start the right-angle turn.' After the voice announcement is completed, the turn signal must be turned off. The key points for each of the five items in Subject 2 are as follows: 1. Steering during reverse parking: Remember that steering should be 'earlier rather than later.' Predict the reference points to leave room for adjustment. 2. Control speed during parallel parking: Use the clutch semi-engagement to slow down the speed; otherwise, the wheels are likely to touch the sideline when steering. 3. Prevent rolling back on the slope start: Rolling back is easily caused by lifting the clutch too quickly, maintaining semi-engagement for too short a time, releasing the handbrake too quickly, or not keeping up with the throttle. 4. Stay outside when entering the curve: Before entering the curve driving test area, try to keep the car close to the outside of the curve to ensure the first turn does not cross the line. 5. Do not relax during the right-angle turn: This is the most overlooked by all students, but the failure rate for this item is particularly high during the test. There are also reference points for the right-angle turn, so do not rely on feeling.

5

4

Share

What does a Level 4 water-damaged vehicle mean?

Below are the six levels of water damage for vehicles. 1. Level 1 water damage: The water level just reaches the vehicle's chassis, and the floor may become damp, but the likelihood of significant water ingress is low, with minimal impact on electrical components. 2. Level 2 water damage: Water reaches halfway up the wheels. Due to the vehicle's incomplete sealing, water begins to enter the interior. For lower sedans, the water level may affect seat adjustment motors and electrical components like heating and ventilation. 3. Level 3 water damage: Water almost completely submerges the tires. The interior water level will fully immerse the seat cushions and center console, affecting numerous electrical components. 4. Level 4 water damage: Water reaches the engine hood. The interior water level rises to the dashboard, and the headlights and engine intake pipe in the engine bay begin to take in water. 5. Level 5 water damage: Water completely submerges the engine hood. At this point, nearly all interior electrical components are affected by the water. 6. Level 6 water damage: Water submerges the roof. The headliner and sunroof module are impacted, and no interior components remain unaffected.

2

4

Share

Are ETC for buses the same as for cars?

ETC for buses and cars are the same because ETC tags do not distinguish between buses and cars. The installation process for ETC devices is as follows: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU; a red light will briefly illuminate, and the OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then, peel off the adhesive backing of the OBU and stick it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is inserted into the OBU device. ETC installation position requirements: The height should be no less than 1.2 meters and no more than 2.5 meters; the installation angle N should be between 30º and 90º (the angle between the surface of the electronic tag and the horizontal plane).

2

0

Share

Can Someone Else Handle the Driver's License Renewal for Me?

Driver's license renewal can be handled by an agent. According to Article 99 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses (Ministry of Public Security Order No. 139)", motor vehicle drivers can entrust an agent to handle license renewal, replacement, submission of physical condition certificates, extension processing, and cancellation services. License renewal and inspection must meet the following conditions: Holders of large passenger vehicle, tractor, city bus, medium-sized passenger vehicle, or large truck driver's licenses must have no demerit points in the current scoring cycle, or holders of other types of driver's licenses must have fewer than 12 demerit points in the current scoring cycle; Holders of large passenger vehicle, tractor, city bus, medium-sized passenger vehicle, or large truck driver's licenses who have demerit points in a scoring cycle, or holders of other types of driver's licenses who have been involved in a traffic accident resulting in death and bear equal or greater responsibility without having their driver's license revoked, must have completed the inspection education; The applicant must have no pending road traffic safety violations or traffic accidents; The applicant's physical condition must meet the driving license requirements; The motor vehicle driver's license must not be seized, detained, temporarily suspended, revoked, canceled, or withdrawn by law.

4

Share

What to Do When Fuel Overflows During Refueling?

When fuel overflows during refueling, it is best to ask the gas station professionals to handle it, as this is safer and professionals can address any issues that arise. During refueling, it is important to note: 1. Do not overfill: When refueling, be careful not to overfill the tank, as gasoline is volatile and overfilling can be dangerous. 2. Leave some space at the nozzle: Always leave a little space at the fuel nozzle to allow air in the tank to escape, which is also safer.

9

4

Share

What is the Sienna?

What is the transmission model of the Classic Sylphy?

Should the turn signal be turned off automatically or manually in the right-angle turn of Subject 2?

What does a Level 4 water-damaged vehicle mean?

Are ETC for buses the same as for cars?

Can Someone Else Handle the Driver's License Renewal for Me?

What to Do When Fuel Overflows During Refueling?

How much fuel does a large truck consume when idling with the air conditioning on for one hour?

Where is the tire tread pattern model written?

Is the Mondeo New Energy a Hybrid?

What is the actual fuel consumption of the old Buick Regal 2.5?