What is the service life of sedan tires in kilometers?

2 Answers
NicoleAnn
09/06/25 4:56am
Sedan tires typically have a service life of around 80,000 kilometers. The functions of tires include: 1. Cushioning the impacts experienced during vehicle operation; 2. Ensuring good ride comfort and smooth driving; 3. Maintaining excellent adhesion between the wheels and the road surface, thereby improving the traction, braking, and off-road capability of the vehicle; 4. Supporting the weight of the vehicle. Tires are circular elastic rubber products mounted on various vehicles or machinery for ground contact and rolling. Situations that require replacing sedan tires include: 1. Severe tire wear; 2. Tire aging with numerous small cracks on the tread pattern; 3. Tires with deformed treads or damaged bead areas; 4. Tires with bulges.
Was this review help?
9
3
Share
PatrickAnn
09/18/25 4:46am
Honestly, there's no exact mileage figure for tire lifespan. After driving for ten years, my most straightforward observation is: check the small raised wear indicators in the tire grooves! When the tread wears down to their level, it's time for replacement. For daily commuting, most passenger tires can last 5 to 6 years or 50,000 to 80,000 kilometers without issues. But pay special attention—if you frequently drive on rough roads or have an aggressive driving style, any fine cracks on the tire sidewalls warrant an early inspection. Last week, while helping a friend check his car, I noticed his vehicle had been parked outdoors for four years. Despite only covering 30,000 kilometers, sun and rain had hardened and cracked the tread rubber, significantly reducing grip. Remember, even the best tires shouldn't be used beyond six years—rubber degradation is far more dangerous than tread wear.
Was this review help?
18
1
Share
Expand All
More Forum Discussions

Why is the engine fan particularly loud?

The main reasons for the engine fan being particularly loud are as follows: Lack of lubrication in the blower bearing: It may be due to a lack of lubrication in the blower bearing or the presence of foreign objects inside the blower. The solution is to add lubricating oil to the blower bearing. If the noise is caused by foreign objects, simply remove them. If the above methods do not resolve the issue, replacing the blower with a new one may be necessary. Noise from the compressor belt: The noise could be due to a damaged tensioner pulley of the compressor belt or a malfunctioning compressor. This type of noise is usually located in the engine compartment and is easy to identify.
9
4
Share

Must a right turn pass through the stop line?

Strictly speaking, a right turn must pass through the stop line, but many drivers turn without crossing the stop line and are rarely penalized. Conditions under which a right turn is allowed: Generally, traffic regulations permit vehicles to make a right turn directly from the right lane without interfering with vehicles proceeding on a green light. Conditions under which a right turn is prohibited: When there is a separate right-turn arrow signal light showing red; when auxiliary signs such as "No right turn on red" or "Right turn prohibited on red" are displayed at the traffic signal.
10
3
Share

What does motorcycle jerking mean?

Under normal driving conditions, a motorcycle should not experience jerking when the throttle is released. However, if the gear and speed are mismatched, such as high gear at low speed or low gear at high speed, jerking may occur when the throttle is released. Motorcycle malfunction: Generally, a motorcycle malfunction causes jerking when accelerating, and jerking when releasing the throttle can confirm whether the gear is too low. Excessive carbon buildup: Many malfunctions are caused by carbon buildup, and some vehicles may experience jerking related to carbon deposits. It is recommended to regularly clean carbon deposits. Transmission damage: Persistent dirt and impurities inside the transmission, especially when accumulated in the valve body, can cause blockages, preventing effective oil pressure regulation and leading to jerking, impact, or slipping issues.
18
5
Share

What is the fuel consumption of the Mazda6 Atenza 2.5?

The Mazda6 Atenza 2.5 currently has three models on sale. Among them, the 2021 2.5L Skyactiv-G Supreme Edition is equipped with a 192-horsepower engine, with an NEDC fuel consumption of 7L per 100km. The 2021 2.5L Skyactiv-G Premium Edition and Sport Edition, also equipped with a 192-horsepower engine, have an NEDC fuel consumption of 7.1L per 100km. The fuel tank capacity of the Mazda6 Atenza 2.5 is 56.2L. The distance each model can travel on a full tank is as follows: 2021 2.5L Skyactiv-G Supreme Edition: 56.2/7*100=802km on a full tank. 2021 2.5L Skyactiv-G Premium Edition and Sport Edition: 56.2/7.1*100=791km on a full tank. Vehicle fuel consumption is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption include: Driving habits: Aggressive driving behaviors such as rapid acceleration, frequent overtaking, and not easing off the throttle before stopping at traffic lights can increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger engines typically produce more power, requiring more gasoline for combustion. Heavier vehicles also tend to have higher fuel consumption due to the greater driving torque needed. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous terrain increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline for combustion, which increases fuel consumption. Additionally, in low temperatures, the engine control unit may command higher idle speeds to warm up the engine, further increasing fuel consumption.
16
5
Share

What are the reasons for oil leakage in the Ninja?

There are several main reasons for oil leakage in the Ninja: Excessive transmission oil: A small portion of the issue is due to excessive transmission oil, which increases the resistance of the transmission gears. When the gears are overworked, internal pressure rises, leading to loosened oil seals and ultimately causing oil leakage. Therefore, it is essential to follow the maintenance manual for oil refilling. Worn oil seals: When the front and rear oil seals of the crankshaft and the oil pan gasket are damaged to some extent, it can also result in engine oil leakage. Improper installation of gear cover gasket: If the timing gear cover gasket is improperly installed during assembly or is damaged, it can cause screw loosening and oil leakage.
5
1
Share

Where are Mann oil filters produced?

Mann oil filters are produced in many locations, but most of them are manufactured in South Korea and China. Introduction to oil filters: An oil filter, also known as an oil purifier, functions to remove impurities, gums, and moisture from the oil, delivering clean oil to various lubrication points. Function of oil filters: An oil filter is a component that filters engine oil. Engine oil contains a certain amount of gums, impurities, moisture, and additives. During engine operation, metal particles generated by friction between components, impurities from the intake air, and oil oxidation products are all filtered by the oil filter. If the oil is not filtered and directly enters the oil circulation system, it will adversely affect the performance and lifespan of the engine.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.