···
Log in / Register

What is the service life of a tire valve?

4 Answers
SanAlina
07/29/25 6:09pm
The normal service life of a rubber valve is 3-4 years. Here are some relevant details about tire valves: 1. Since the valve is made of rubber material, it is inevitable that it will crack, deform, and lose its elasticity. 2. Its lifespan is similar to that of the tire, so it is recommended to replace the rubber valve when replacing the tire. 3. The valve is an important component that maintains the air pressure inside the tire, primarily used for inflating and deflating the tire, and ensuring the seal after inflation. It is advisable to replace the valve regularly to reduce driving safety hazards.
Was this review help?
10
0
Share
McElla
08/14/25 10:31am
I've been driving for over ten years and found that the lifespan of tire valves generally lasts about 3 to 5 years, mainly depending on the valve material. For example, ordinary rubber ones are prone to aging and cracking, especially after exposure to the summer sun, which accelerates deterioration. You can visually inspect them for cracks. If you frequently drive long distances or park your car outdoors exposed to wind and sun, the lifespan may be even shorter, so you need to check them more often. I usually make it a habit to squeeze the valves during routine car maintenance to check for leaks, or simply replace them when getting new tires. The whole process doesn’t cost much and saves a lot of hassle—better than waiting until the air leaks out and the tire is ruined. Before driving, I always take a quick glance at the tires, and if the pressure feels unstable, I top it up immediately. Keeping driving safety in mind is the top priority, after all, no one wants to be stranded on the road.
Was this review help?
7
4
Share
Expand All
HenryLee
10/14/25 4:32am
How long a tire valve can last really depends on the material type and environmental factors. Rubber valves typically hold up for three to five years, while metal ones are far more durable, potentially lasting over a decade. Temperature plays a big role—extreme heat or cold can accelerate aging, so don’t overlook this small part during daily driving. I recommend checking the valve every 20,000 kilometers by simply pressing it to see if it feels soft, as air leaks can cause pressure to drop rapidly. Replace the valve when changing tires or during routine maintenance to prevent leaks that could lead to uneven tire wear or even blowouts. A little preventive care goes a long way in avoiding major issues—road safety is all about attention to detail.
Was this review help?
15
4
Share
Expand All
LeJeffrey
11/27/25 5:26am
The lifespan of tire valves is generally not long, with rubber ones lasting about 3 to 5 years, and even shorter in harsh environments. I make it a habit to check the valve every time I wash my car, looking for any deformation or signs of air leakage. Neglecting it may lead to slow leaks, causing the tire to wear out prematurely and incur higher costs. A routine pressure check before driving can help identify issues. Safety first, regular maintenance is key.
Was this review help?
17
0
Share
Expand All
More Forum Discussions

What is the difference between piano black and glossy black for cars?

Different processes. Here is the relevant information: 1. Car color: Car color is one of the elements of car styling. Car colors include the paint color of the exterior body and the colors of various materials in the interior. When the interior environment of the car and the exterior color of the car harmonize with the surrounding environment, it can provide a pleasant aesthetic experience for passengers and pedestrians. 2. Color and functional use: During the use of cars, certain colors gradually acquire special meanings. For example, fire engines use red, ambulances use white, postal vehicles in China use green, military vehicles are generally dark green, and engineering machinery vehicles often use yellow and black combinations. Some vehicles also incorporate functional symbols or patterns on the base color, such as the red cross symbol on ambulances, snowflake symbols or penguin patterns on refrigerated trucks, etc.
8
0
Share

How many points are deducted for fatigue driving after several hours?

Fatigue driving refers to driving without stopping for rest for more than 4 hours. The introduction to fatigue driving is as follows: Introduction to Fatigue Driving: Fatigue driving occurs when a driver operates a vehicle for an extended period while in a physically fatigued state. It is a hidden danger that can lead to various traffic accidents. Regarding the act of excessively fatigued driving, the "Road Traffic Safety Law" authorizes provinces, cities, and autonomous regions to formulate their own penalty rules within a fine range of up to 200 yuan. Penalty Regulations for Fatigue Driving: Article 62 of the "Regulations for the Implementation of the Road Traffic Safety Law" stipulates: When driving a motor vehicle, the following behaviors are prohibited: continuously driving a medium-sized or above passenger vehicle or a vehicle transporting hazardous materials for more than 4 hours without stopping for rest or stopping for less than 20 minutes, which results in a deduction of 12 points at one time.
13
3
Share

What does the BYD Tang DMI chassis downgrade include?

BYD Tang DMI has regressed to the same iron chopstick suspension and subframe as the fuel-powered Tang. However, the fuel version still comes with a spare tire, while the DMI version even omits the spare tire. Moreover, the DMI version carries a large battery and electric motor, making it heavier than the fuel version. Below is an introduction to the BYD Tang DMI: 1. Model. The BYD Tang DM is a mid-size SUV with dimensions of 4870 mm in length, 1950 mm in width, and 1725 mm in height, and a wheelbase of 2820 mm. 2. Power. This model is equipped with a 2.0-liter turbocharged four-cylinder engine across the entire lineup. The 2.0-liter turbocharged four-cylinder engine in the BYD Tang DMI delivers 192 horsepower and a maximum torque of 320 Nm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The use of an aluminum alloy cylinder head and block reduces the engine's weight, thereby improving the vehicle's handling and fuel efficiency.
4
3
Share

What car has a snake emblem?

Snake emblem represents the Mustang Cobra, a sports car under Ford. Its body dimensions are: length 4794mm, width 1916mm, height 1391mm, with a wheelbase of 2720mm, fuel tank capacity of 58.9l, and tire specification of 255/40r19. The Mustang Cobra is equipped with a 2.3T turbocharged engine delivering maximum power of 220kW at 5400rpm, peak torque of 434Nm at 3000rpm, paired with a 10-speed automatic transmission.
8
2
Share

Does the Old Model Cruze Have a Charging Port?

The old model Cruze does not have a charging port and requires an external connection from the cigarette lighter socket. Below are specific details about the Cruze: 1. Body Colors: The Cruze comes in Aurora White, Obsidian Black, Cold Platinum Silver, Glacier Blue, Titanium Gray, and Flame Red, along with four interior color options: Starry Dark Gray, Brocade Dark Gray, Matte Gray-Black, and Saddle Brown. 2. Powertrain: The Cruze continues to be equipped with two engines, a 1.5L and a 1.4T, with maximum power outputs of 114 horsepower and 150 horsepower, respectively. The 1.4T model is paired with a 7-speed dual-clutch transmission, while the 1.5L model comes with either a 6-speed automatic transmission or a 6-speed manual transmission.
7
5
Share

What kind of engine oil should be used for the New Alto?

The original factory engine oil brand for the New Alto is Suzuki. If you want to change the engine oil during later maintenance, you can choose brands such as Shell, Mobil, Castrol, or Total. The recommended engine oil specifications in the New Alto's official manual are 0W-20 and 5W-20. Any engine oil model that meets these two specification parameters can be used. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother for the car. The latter number represents the kinematic viscosity of the oil at 100°C. The higher the value, the better it can maintain viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the engine oil in the New Alto is as follows: Wait for the engine temperature to drop, and also allow the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and catch the old oil from the drain with an oil pan until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain; Use a special wrench to remove the oil filter; apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add the new engine oil through the oil filler cap on the engine valve cover, usually filling about three-quarters of a bottle; Start the engine and let it run for 5 minutes, then check for any oil leaks around the drain plug and oil filter. If there are leaks, they should be repaired; After stopping the engine, pull out the oil dipstick and check that the engine oil level is within the standard range.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.