What is the sequence of the driving test for small vehicle subject 2?

2 Answers
LeLydia
07/29/25 11:22pm
Test sequence is determined by the order of candidates' arrival time. Steps: After arriving at the test site, candidates swipe their ID card to enter the waiting hall and queue up. Follow the instructions on the display screen to go to the corresponding area, swipe the ID card, print the admission ticket, and enter the corresponding lane of the test site. When the vehicle corresponding to the admission ticket number is vacant, get on the car, swipe the ID card, complete facial recognition, then adjust the seat, backrest, and rearview mirror. After adjustment, the test can begin. During the test, follow the sequence of reversing into the garage—parallel parking—curve driving—right-angle turn—half-slope parking and starting (there may be regional differences, specific details can be confirmed with the driving school instructor). Test precautions: During the test, stopping midway is not allowed. This requirement means that when each test item starts, there will be a voice prompt in the car. For example, when the voice "Please reverse into the garage" is heard, it indicates the official start of this test item. When moving from one test item to the next, stopping is allowed before the voice prompt for the next item starts. During the test, if a certain operation is not performed properly and points are deducted, there will be a voice prompt. If the operation is qualified, there will be no sound, and you can proceed directly to the next item. After completing the slope parking and starting, there will be a voice prompt in the car. If qualified, it will prompt "Test passed, please go to the test center to print the results". If the test fails, it will prompt "Test failed". If the first attempt fails, the second test will be conducted immediately. The test process is the same as the first attempt, using the same car and the same test lane, and fingerprint verification is required again. Those who fail the retest need to make another appointment for the test after 10 days.
Was this review help?
12
2
Share
VanBarrett
08/16/25 1:56am
I just passed the second part of my driving test last week, and I remember the sequence clearly: It started with reversing into the parking space, which was the most technically challenging part—you have to align the points and reverse slowly without rushing. Next was parallel parking, where you must check the rearview mirror to avoid crossing the lines. Then came the hill start and stop, where you need to control the clutch carefully to prevent stalling. After that was the curve driving, maintaining a steady speed while steering. Finally, the right-angle turn, which you can complete in one go. I was sweating buckets from nerves during the hill start, but thankfully, I followed my instructor’s advice and practiced it several times. During the test, I took deep breaths and took it step by step. I recommend that beginners simulate the test at the venue beforehand—being familiar with the environment can save a lot of stress. Memorize this sequence, and you won’t panic when it’s your turn.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

Where is the air filter of Volkswagen Bora located?

The air filter of Volkswagen Bora is located inside the glove box on the passenger side. The function of the air filter is to separate dust, pollen, and grinding particles from the air, ensuring fresh air inside the car. Taking the 2021 Volkswagen Bora as an example, it belongs to the compact car category, with body dimensions of: length 4663mm, width 1815mm, height 1462mm, a wheelbase of 2688mm, a fuel tank capacity of 50 liters, and a curb weight of 1245kg. The 2021 Volkswagen Bora features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 113ps, a maximum power of 83kW, and a maximum torque of 145Nm.
19
4
Share

What kind of engine oil should be used for the Jade?

Honda Jade can use engine oil with a viscosity of 0W20. If the vehicle is relatively old, the viscosity value of the engine oil can be appropriately increased. The following is more information about Jade engine oil: 1. Generally, adding 3.8 liters of engine oil is sufficient for the Jade. Try to avoid adding up to 4 liters, as overfilling can cause certain impacts, such as oil burning phenomena, etc. 2. Due to the compact structure of the engine and the small gaps between internal components, using low-viscosity engine oil can improve fuel economy and allow the engine to demonstrate maximum performance. 3. Naturally aspirated engines do not have high requirements for engine oil, and mineral oil or semi-synthetic oil can be used. If the budget allows, fully synthetic oil can be adopted. 4. When selecting an engine oil brand, if longevity is a priority, Mobil oil can be chosen; if the cleaning ability of the oil for the engine is a concern, Shell oil is recommended; if strong oil film toughness is needed, Castrol is advocated.
10
3
Share

What is the starting letter for license plates in Hubei?

Hubei license plates start with the character 'E', which is the abbreviation for Hubei. More information about license plates is as follows: 1. The license plate number of a motor vehicle consists of the registration authority code and the plate number. 2. Every vehicle on urban or rural roads has an 'ID number', which is the license plate number. The first character of the license plate number is the abbreviation of the provincial-level administrative region. 3. The license plate codes for cities in Hubei are: E-A - Wuhan, E-B - Huangshi, E-C - Shiyan, E-D - Jingzhou, E-E - Yichang, E-F - Xiangyang, E-G - Ezhou, E-H - Jingmen, E-J - Huanggang, E-K - Xiaogan, E-L - Xianning, E-M - Xiantao, E-N - Qianjiang, E-P - Shennongjia Forest District, E-Q - Enshi Tujia and Miao Autonomous Prefecture, E-R - Tianmen, E-S - Suizhou.
9
2
Share

What car has a horse as its logo?

The car with a horse as its logo is the Ford Mustang. Taking the 2020 Ford Mustang as an example, its body dimensions are: length 4794mm, width 1916mm, height 1391mm, with a wheelbase of 2720mm, a fuel tank capacity of 58.9l, and a curb weight of 1702kg. The 2020 Ford Mustang features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.3l turbocharged engine, delivering a maximum horsepower of 299ps, a maximum power of 220kw, and a maximum torque of 434nm, paired with a 10-speed automatic transmission.
15
1
Share

What is a Plug-in Hybrid Electric Vehicle?

Plug-in hybrid electric vehicles (PHEVs) are a type of new energy vehicle that bridges the gap between pure electric vehicles and traditional fuel-powered cars. They incorporate the engine, transmission, drivetrain, fuel system, and fuel tank of conventional vehicles, along with the battery, electric motor, and control circuitry found in pure electric vehicles. PHEVs feature larger battery capacities and charging ports, combining the advantages of both pure electric and hybrid vehicles. They can operate in pure electric mode with zero emissions, while also extending driving range through hybrid operation. Plug-in hybrid electric vehicles are categorized into: 1. Series plug-in hybrid; 2. Parallel plug-in hybrid; 3. Power-split or series-parallel plug-in hybrid.
12
1
Share

Do You Need to Press the Accelerator When Reversing an Automatic Car?

When reversing an automatic car, there is no need to press the accelerator; just manage the brake properly. However, not all automatic cars will move on their own when shifted into reverse gear—some may require a bit of throttle. The specific reasons are as follows: 1. When reversing, the driver's attention is highly focused, and accidentally pressing the accelerator too hard can easily lead to a traffic accident. Therefore, it is sufficient to control the speed using the brake. 2. The torque in reverse gear is slightly less than that in first gear. If you shift into reverse without pressing the accelerator, the car might not move. 3. Rust on the brake discs due to water contact. This increases the rolling resistance of the wheels, so pressing the accelerator may be necessary to move when in reverse gear. 4. Dirty transmission fluid or slipping clutch plates. Automatic cars use a torque converter to transfer engine power to the transmission, while dual-clutch transmissions use friction plates similar to manual transmissions to transfer power. The principle of a torque converter is akin to one fan blowing air at another, except the medium is transmission fluid instead of air. If the transmission fluid is too dirty or deteriorated, it cannot function properly, causing the car to fail to move when shifted into reverse gear.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.