What is the sequence of actions for getting into the car in Subject 2?

Should the high beam be reset after use in the Stage 3 lighting test?

In the Stage 3 lighting test, the high beam should be reset after use. Otherwise, it may affect the next student's operation. Here are some precautions for the Stage 3 lighting test: 1. Follow the instructions: Do not complete the vehicle lighting operation steps in advance. The operation must be completed within 5 seconds after the voice broadcast ends. Performing the operation before the voice broadcast is finished will result in a failed test. 2. Adjust your mindset: Before the Stage 3 lighting simulation test, adjust your mindset, stay calm, and avoid consuming stimulating foods. Keep a clear mind during the test and listen carefully to the instructions without panicking. 3. Check the lights before the Stage 3 test officially begins: After walking around the vehicle, adjusting the seat and rearview mirror, and fastening the seat belt, you should check whether the lights are reset.

13

1

Share

Is Interior Leather Recoloring Done by Replacing the Leather or Painting?

Automotive interior recoloring is achieved through painting. Simply put, interior spray painting involves using specialized paint applied to the surface to change its color. It is understood that this method of color change is relatively mature abroad and can ensure that the leather does not fade for a long time. Below is relevant knowledge about automotive interiors: 1. Introduction: Automotive interiors mainly refer to the products used for internal modifications of vehicles, covering all aspects such as steering wheel covers, seat cushions, floor mats, car perfumes, pendants, interior accessories, storage boxes, etc. 2. Scope: Automotive interiors primarily include the following subsystems: dashboard system, auxiliary dashboard system, door trim panel system, headliner system, seat system, pillar trim panel system, other interior trim components, cabin air circulation system, trunk interior system, engine compartment interior system, carpets, seat belts, airbags, steering wheel, as well as interior lighting and acoustic systems, etc.

10

0

Share

Does the Reiz Burn Engine Oil?

Oil burning in the Reiz is only an occasional occurrence. Causes of oil burning: 1. Cold engine oil burning: When the car's temperature has not fully warmed up, the engine exhaust pipe emits a lot of blue smoke, but it returns to normal after the engine warms up. This phenomenon is caused by aging valve stem seals. 2. Hot engine oil burning: When the car reaches normal operating temperature, the exhaust pipe still emits blue smoke, indicating poor sealing of the piston rings. The following are extended details regarding engine oil: 1. Increased fuel consumption: When adding engine oil, the oil level should be between the upper and lower limits on the dipstick. If too much oil is added, the engine's temperature rise will cause the oil to expand, increasing pressure in the oil chamber, raising operational resistance, leading to reduced car performance and increased fuel consumption. 2. Overfilling oil: Overfilling oil can cause the crankcase breather pipe to leak oil, increasing crankcase pressure. The oil seal may loosen due to oil pressure, leading to oil leaks. 3. Heat dissipation: Overfilling oil can affect engine heat dissipation.

14

4

Share

Is Volvo's Collision Protection Really Effective?

Volvo's collision protection is indeed effective. Volvo performs excellently in crash tests, with many of its older models still achieving outstanding results in current crash tests, demonstrating Volvo's manufacturing philosophy (after the introduction of the 25% offset collision test, many models failed to meet the standards, but Volvo met the criteria even without upgrades). Below are the specific details of the Volvo S90: 1. Model Positioning: The Volvo S90, as a minor annual update, has added two new sport versions. 2. Configuration: Significant improvements have been made to mid-to-high-end models. Taking the Momentum trim as an example, compared to the current model, it adds practical features such as leather-wrapped dashboard, electric adjustment for front seat cushion length, enhanced air purification system, electric side window sunshades, rear windshield sunshade, and an automatic parking system. 3. Powertrain: It continues to use the low/high-power Drive-E series 2.0T turbocharged engine, where the T4 corresponds to low power, outputting 139kW (190PS), and the T5 corresponds to high power, outputting 186kW (254PS), paired with an Aisin 8-speed automatic transmission.

13

4

Share

Why is the Mondeo steering wheel heavy?

The reasons for the heavy steering wheel of the Mondeo are as follows: 1. Insufficient power steering fluid: Power steering fluid is a medium oil used in the car's power steering pump, which serves to transmit steering force and provide cushioning. The power steering fluid needs to be replaced regularly, and checked for leaks. When the power steering fluid is insufficient, the steering wheel will feel heavy and stiff. 2. Low tire pressure: Low tire pressure increases the contact area between the tires and the road surface, increasing friction and making steering more difficult, resulting in a heavy steering wheel, which is not conducive to driving safety. 3. Steering gear or power steering pump failure: The steering gear and power steering pump also affect the car's steering. Any failure in these two important components will cause steering difficulties. Issues such as universal joints, chassis suspension stabilizer bars, or plane bearings should not be overlooked.

10

4

Share

What Causes the Zizi Sound When a Volkswagen Starts?

The reasons for abnormal noise when a car starts are as follows: 1. Engine Abnormal Noise: Engine abnormal noise indicates that there may be multiple possibilities of noise coming from the engine compartment. Most people also judge the source of the noise as coming from the engine compartment, which is usually a sharp metallic sound or a whistling noise. When the engine produces abnormal noise, it should be repaired promptly to prevent the fault from expanding. 2. Transmission Abnormal Noise: Transmission abnormal noise symptoms indicate that there is a "rustling" sound inside the transmission while the car is moving, which disappears when the clutch or accelerator is pressed. There may also be a whistling sound when shifting gears. If a specific gear produces noise, it is definitely related to the components affecting the transmission of that gear. If all gears produce noise, it is often due to a fault in the constant mesh gear shaft or insufficient oil in the transmission.

10

0

Share

What is the sequence of actions for getting into the car in Subject 2?

Should the high beam be reset after use in the Stage 3 lighting test?

Is Interior Leather Recoloring Done by Replacing the Leather or Painting?

Does the Reiz Burn Engine Oil?

Is Volvo's Collision Protection Really Effective?

Why is the Mondeo steering wheel heavy?

What Causes the Zizi Sound When a Volkswagen Starts?

Why can't the steering wheel of a Volkswagen car be turned when it's locked?

Will points be deducted for not turning off the signal light during a right-angle turn?

Where is the fuel tank switch located in a Mitsubishi SUV?

Why is there no sound when Bluetooth is connected to a Volkswagen car?