···
Log in / Register

What is the seat height of the Kawasaki Z250?

4 Answers
StJudah
07/30/25 2:01am
The seat height of the Kawasaki Z250 is 785 mm. In terms of the bike's weight: The dry weight is 154 kg, and the wet weight is 174 kg, which is lighter compared to other models in the same displacement category. In terms of the bike's length: The bike is compact (length of 2025 mm) with a short wheelbase (1416 mm), making it lightweight and easy to handle. Its light weight makes pushing and reversing the bike effortless. With a seat height of 785 mm, it is suitable for shorter riders and offers good maneuverability. This bike is sufficient for daily commuting or weekend leisure rides in the mountains, making it an excellent choice for beginners.
Was this review help?
6
5
Share
MasonDella
08/15/25 7:59am
The seat height of the Kawasaki Z250 is 785mm. I remember when I test-rode it as a beginner with a height of 172cm, it felt just right. Seat height refers to the vertical distance from the top of the seat to the ground, and this height greatly impacts riding safety. If both feet can firmly touch the ground, stopping and starting become much easier, eliminating worries about the bike tipping over. Shorter riders might find it a bit high—they can try wearing thick-soled shoes or modifying the seat, such as shaving some foam to lower it to around 770mm. Riding posture is also a factor to consider. The Z250 is a street bike with a slightly forward-leaning posture, but if the seat height is too high, legs won’t stretch comfortably, leading to more fatigue. It’s best to visit a dealership to sit on the bike in person, as different riders have different perceptions. Choose the most stable posture based on your height and weight, not just the numbers. When riding for the first time, take time to adjust to the height, ensuring you can maintain balance even in turns. In short, when the seat height is right, the fun of riding truly comes alive.
Was this review help?
10
1
Share
Expand All
Jaxson
10/21/25 3:52am
The official seat height of the Kawasaki Z250 is 785mm, which I verified on the manufacturer's website when purchasing the bike. As a motorcycle enthusiast, I believe seat height isn't just an isolated number—it significantly affects the bike's overall balance. Compared to other 250cc sport bikes like the Yamaha R25 (780mm) and Honda CBR250R (775mm), the Z250 sits slightly higher, potentially offering better stability but requiring riders above 170cm for optimal comfort. In practical riding, excessive seat height may cause instability when stopping (tiptoeing), while insufficient height compromises ground clearance. I recommend measuring your inseam before choosing—ideally allowing full foot contact or at least heel contact. Remember that suspension affects seat height too; new bikes may settle slightly after initial use. When selecting accessories, avoid altering seat cushion thickness excessively to maintain factory ergonomics. Keeping proper seat height standards is crucial—safety always comes first.
Was this review help?
10
1
Share
Expand All
FelicityDella
12/04/25 4:20am
The seat height of the Kawasaki Z250 is 785mm. From a safety riding perspective, I think this height is acceptable for people of average build. Seat height directly affects whether you can plant your feet firmly on the ground when stopping, avoiding the risk of slipping. If it's too high, dangling feet make control difficult, especially in traffic jams. Riders shorter than 165cm might find it challenging and should test ride to confirm. During riding, a higher seat also affects the center of gravity, requiring more attention to balance in corners. Don't underestimate this number—it's about confidence and stability. It's recommended to pair with a helmet and high-top shoes for added support. Regularly check if the suspension is functioning properly, as abnormal seat height could indicate component issues. Safety first—don't force yourself onto bikes with excessively high seats.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

How Many Credit Hours Are Required for Subject 2?

According to the "Motor Vehicle Driver Training Teaching and Examination Outline," for the Subject 2 test of C1 and C2 driver's licenses, a total of 16 credit hours are generally required. As per relevant regulations, the number of credit hours can be increased but not reduced. Additionally, regulations may vary in different regions, so the specific number of credit hours should be determined based on local rules. Here are the relevant details: 1. Content of Subject 2: Subject 2 learning is divided into theoretical knowledge and practical operations. Theoretical knowledge includes basic driving operation standards and site driving knowledge, typically arranged for 2 credit hours. Practical operations involve basic driving skills such as driving posture, getting in and out of the car, starting and stopping, as well as learning the test items for Subject 2. 2. Recording Credit Hours for Subject 2: With the increasing number of people learning to drive, many driving schools offer services to help students record credit hours to expedite the examination process. Once students begin Subject 2 practice, the driving school will record videos of the practice sessions and assist in logging the credit hours. Students can then focus on practicing, and once the required credit hours are completed and practice is finished, they can proceed to schedule the test. However, different driving schools may have varying requirements for recording credit hours, so specifics should be confirmed locally.
17
3
Share

How many points should be deducted for not yielding to a school bus?

According to Article 11, Clause 8 of the "Measures for the Scoring Management of Road Traffic Safety Violations": Failing to yield to a school bus as required while driving a motor vehicle will result in a deduction of 3 points and a fine. Since school buses are special vehicles, especially when they stop to pick up or drop off students, vehicles around the school bus must yield, slow down, and pass cautiously. Do not compete with the school bus for the right of way, honk, or use lights to urge the school bus to move. Correct methods for yielding to a stopped school bus: On a road with only one lane in the same direction: When a school bus stops on a road with only one lane in the same direction, vehicles behind must stop and wait, and are not allowed to overtake. On a road with two or more lanes in the same direction: When a school bus stops on a road with two or more lanes in the same direction, vehicles in the same lane behind the bus and in the adjacent lane must stop and wait, while vehicles in other lanes should slow down and pass. When riding a school bus, it is important to fasten your seatbelt to avoid collision injuries during braking. Eating or drinking is prohibited while the school bus is in motion to prevent food or beverages from entering the respiratory tract during sudden braking or accidental collisions, which could cause harm or endanger life.
18
2
Share

What Causes Noise When Braking?

Reasons for brake noise: 1. Noise from new brake pads: Many car owners believe that a sharp, piercing sound when braking in a new car must indicate a quality issue with the vehicle. However, this is not the case. New brake pads and discs require a break-in period. When braking, if the pads happen to grind against a hard spot (due to the material of the pads), this noise can occur, which is completely normal. 2. A dull sound when braking: This situation is often caused by a malfunction in the brake caliper, such as wear on the sliding pins or detachment of the spring clips, which can prevent the caliper from functioning properly. 3. A clicking sound during hard braking: This is likely the sound of the ABS system operating normally. The ABS system keeps the wheels on the verge of locking, causing intermittent rolling. When hard braking triggers the ABS, it produces a clicking sound, which is normal. 4. A hissing sound when braking: This noise can be caused by issues with the caliper, brake disc, or brake pads. If the noise is continuous, the first thing to check is whether there is any dragging. Poor caliper retraction can cause prolonged friction between the disc and pads, leading to noise under certain conditions. If the noise occurs right after installing new pads, it may be due to a mismatch in size between the new pads and the friction blocks.
5
3
Share

How to Calculate Fuel Costs?

Fuel cost calculation method: Determine the fuel cost per kilometer by dividing the total refueling amount by the fuel price and then by the mileage, based on how many kilometers the car runs after a full tank of gasoline, along with the total refueling amount and the fuel price at that time. Here are related introductions: 1. Gasoline operation: The energy of the car's internal combustion engine is converted from thermal energy to mechanical energy through ignition to power the vehicle. 2. Gasoline anti-knock properties: During driving, gasoline has the ability to resist knocking combustion. The anti-knock property of gasoline is reflected by its octane number. The higher the octane number, the better the anti-knock performance. 3. Gasoline properties: Gasoline is very stable under natural conditions and does not corrode equipment such as cylinders during storage and transportation. 4. Gasoline grades: China uses grades to differentiate the production and sale of gasoline. The grade of gasoline is determined by its octane number. Generally, gasoline with a higher grade has better anti-knock performance. Drivers should choose the gasoline grade based on the engine's compression ratio or consult the vehicle's user manual.
14
4
Share

How Many Points Can Be Deducted During the Probationary Driving Period?

All types of driver's licenses have 12 points during the probationary period, with specific requirements as follows: 1. For a C1 driver's license, a maximum of 11 points can be deducted during the probationary period. 2. For A and B class driver's licenses, if more than 6 points are deducted during the probationary period, the probationary period will be extended by one year. If more than 6 points are deducted again during the extended year, the license will be directly revoked. Therefore, it is best not to have more than 6 points deducted for A and B class licenses during the probationary period. The calculation method for the driver's license point accumulation cycle is as follows: 1. The cycle starts from the date the driver's license is first issued, with each cycle lasting 12 months. According to the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' Article 65, the accumulation cycle for traffic safety violations (i.e., the point cycle) is 12 months, with a maximum of 12 points, calculated from the date the driver's license is first issued. 2. Based on the severity of the traffic safety violation, the points deducted for a single violation can be: 12 points, 6 points, 3 points, 2 points, or 1 point. 3. Article 66 states that penalties and point deductions for traffic safety violations by motor vehicle drivers are executed simultaneously. If a driver commits multiple violations at once, the points should be calculated separately and accumulated.
19
3
Share

What does shuffle mean?

Random selection playback, unordered playback. The following is a related introduction to car Bluetooth: 1. Function: Bluetooth/car phone is designed for driving safety and comfort. Passengers only need to have a mobile phone with Bluetooth function to connect with the car Bluetooth, so as to make and receive calls through the car Bluetooth. 2. Function: Automatically identify mobile phones, no need for cables or phone holders to connect with mobile phones; users do not need to touch the mobile phone (hands remain on the steering wheel) to control the mobile phone, and use voice commands to control answering or making calls. Users can make calls through the car audio or Bluetooth wireless headset.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.