What is the seat height of the CFMOTO 250SR in centimeters?

2 Answers
NoahAnn
07/25/25 4:03am
The seat height of the CFMOTO 250SR is 78 centimeters. This motorcycle features a single-cylinder, liquid-cooled, four-stroke engine. It comes with front and rear disc brakes equipped with CBS or ABS, a maximum power output of 20.5 kW, and a maximum torque of 22 Nm. The fuel tank capacity is 12 liters, and it uses a wet multi-plate clutch with a slipper clutch. The displacement is 249 ml, and it has aluminum alloy wheels. The dimensions of the motorcycle are 2010 mm in length, 750 mm in width, and 1080 mm in height, with a wheelbase of 1360 mm. Motorcycles are two or three-wheeled vehicles powered by gasoline engines, steered by handlebars for front-wheel control. They are lightweight, flexible, and fast, widely used for patrols, passenger and cargo transport, and also serve as sports equipment.
Was this review help?
16
5
Share
LaJoel
08/10/25 5:14pm
I've been riding the CFMoto 250SR for quite a while now, and its seat height is 79 cm. At my height of 170 cm, I can firmly plant both feet on the ground when seated, which gives excellent handling. Seat height is crucial for riding—too high, and you might struggle to reach the ground when stopping, risking a tip-over; too low, and cornering on mountain roads might feel unstable. The 250SR's height is just right—slightly taller than some domestic models like the QJiang Sai 250 but offers better comfort. I frequently ride in the city, and the right seat height helps reduce backaches. My advice when choosing a bike: don’t just focus on engine displacement—actually sit on it to check if your feet can touch the ground. Also, seat material firmness affects comfort—the 250SR comes with memory foam, making long rides less tiring. If you're over 180 cm tall, you might find it slightly low, but it fits most Asian riders around 175 cm perfectly.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

What are the symptoms of a faulty release bearing?

If the release bearing is faulty, after starting the engine, lightly press the clutch pedal. When the free travel is just eliminated, a "rustling" or "squeaking" sound will occur. If the sound disappears when you continue to press the clutch pedal, it is not a problem with the release bearing. If the sound persists, it is the release bearing making the noise. Below are some related maintenance tips for the release bearing: 1. Follow operating procedures to avoid the clutch being in a semi-engaged or semi-disengaged state, and reduce the frequency of clutch usage. 2. Pay attention to maintenance. Periodically or during inspection and maintenance, remove the release bearing and clean out impurities. Use the boiling method to soak it in lubricating oil, ensuring it has sufficient lubricant. Pay attention to the clutch release lever to ensure the return spring's elasticity meets specifications. 3. Minimize the number of engagements and disengagements to reduce impact loads. Press lightly, release smoothly, and move your foot away from the clutch pedal to ensure smooth engagement and disengagement. If the release bearing is severely worn or burnt out, it is recommended to replace it. Ensure thorough lubrication before installation.
17
0
Share

What to Do When the Car Key Cannot Be Pulled Out?

Reasons and solutions for a car key that cannot be pulled out are as follows: 1. Key cannot be pulled out after turning off the engine: The reason for this is that the gear is not fully returned to the P position. Although it may appear to be in place, it may not have triggered the electronic sensor, or there may be obstacles like coins in the gear slot preventing it from returning fully. In this case, the owner should check for any obstructions in the gear slot, remove them, restart the car, and shift the gear again to ensure it is fully returned to position. The key can then be pulled out. 2. Steering wheel not straightened when parking, causing the steering wheel to lock: In this situation, while gently turning the key with your right hand, wiggle the steering wheel left and right with your left hand, and the key can then be pulled out. 3. Poor contact due to water in the key: In this case, do not pull hard. Try using a gentle force several times to pull the key out. If the key gets wet, avoid shaking it vigorously or pressing the buttons, as this can cause water to seep into other important circuits. Also, do not use the remote to unlock the car immediately, as this may damage the circuit board. The correct approach is to open the key casing, lay it flat, and use a hairdryer to dry it before further inspection.
11
0
Share

Is it necessary to step on the brake when shifting gears in an automatic transmission car?

When shifting gears in an automatic transmission car, it is not always necessary to step on the brake. The need to step on the brake depends on the following situations: 1. Shifting from P (Park) to R (Reverse) requires stepping on the brake. 2. Shifting from P (Park) to D (Drive) requires stepping on the brake. 3. Shifting from D (Drive) to N (Neutral) does not require stepping on the brake. 4. Shifting from R (Reverse) to N (Neutral) does not require stepping on the brake. 5. Shifting from N (Neutral) to D (Drive) requires stepping on the brake. 6. Shifting from N (Neutral) to R (Reverse) requires stepping on the brake. 7. Shifting from D (Drive) to S (Sport) does not require stepping on the brake. This design in automatic transmission cars is for safety considerations and to protect the automatic transmission.
6
2
Share

What is the bulb model for Audi A5 headlights?

The bulb model for Audi A5 headlights is Philips D3S-42V35W. The bulb model may vary depending on the production year, and there could also be differences between high and low configurations of the same year. Therefore, specific information is needed to determine the exact model. Below is an introduction to the car lights: 1. Turning away from AUTO switches to manual mode. Lifting the switch (toward the steering wheel) activates the turn signal, while pushing it in the opposite direction (downward) turns on the high beams. Returning it to the original position switches back to low beams. 2. Low beams are designed for close-range illumination, with a wide coverage angle (160°) and short projection distance. The focus cannot be adjusted. 3. Car headlights, also known as car front lights or LED daytime running lights, serve as the 'eyes' of the car. They not only affect the owner's external image but are also crucial for safe driving at night or in bad weather conditions.
20
4
Share

Can fuel additive be added after the tank is full?

You can add fuel additive after filling up the gas tank, but the mixing effect may not be as good. The correct method is to add the fuel additive before refueling, allowing it to fully mix with the gasoline under the impact of the fuel flow, thereby achieving the best results. Here is some relevant information: 1. For turbocharged engines, long-term use can lead to significant carbon buildup. In such cases, using a fuel additive (cleaning type) is beneficial for the car. However, it does not mean you should use it continuously (once every 5,000 kilometers is sufficient), as excessive use can easily clog the catalytic converter. 2. There is another type of fuel additive that improves the anti-knock properties (octane rating) of the fuel, reducing the likelihood of engine knocking. However, prolonged use of this type can lead to increased carbon buildup and higher fuel consumption.
6
3
Share

How long is the warranty period for car batteries?

The warranty period for car batteries is one year. Below are some precautions for car battery maintenance: 1. In-car electricity usage: To maintain the car battery, avoid listening to the radio loudly, charging mobile phones, or using air pumps when the engine is off. Prolonged use can easily drain the battery, and frequent draining significantly reduces its lifespan. 2. Long-distance high-speed driving: Regularly driving on highways has many benefits. It not only helps remove carbon deposits from the vehicle but also fully charges the battery. Generally, driving on the highway for more than an hour can fully charge the car battery, keeping it in optimal condition. 3. Avoid long-term parking: If the car is not used for an extended period, the battery cable should be disconnected, or the vehicle should be started and driven for several dozen kilometers every two weeks to ensure the battery remains functional. 4. High-power electrical connections: Many car appliances, such as car refrigerators, vacuum cleaners, and air pumps, have high instantaneous power. Avoid directly powering these devices with the car battery.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.