What is the scrapping standard for water-damaged vehicles?

1 Answers
AmyRose
07/29/25 12:25pm
There is no specific scrapping standard for water-damaged vehicles. Below are the detailed explanations of relevant content: 1. Specific definition of water-damaged vehicles: Water begins to accumulate in the vehicle, and internal components are damaged due to the water. Water-damaged vehicles also have corresponding flood damage levels. 2. Classification of flood damage levels for water-damaged vehicles: Level 1 is when water just reaches the vehicle chassis, Level 2 is when water reaches half of the wheels, Level 3 is when water almost completely submerges the tires, Level 4 is when water reaches the engine hood, Level 5 is when water completely submerges the engine hood, and Level 6 is when water submerges the roof.
Was this review help?
15
4
Share
More Forum Discussions

What is the reason for one fan spinning and the other not spinning in a Volkswagen?

Volkswagen car's fan with one spinning and the other not spinning may be due to a fault in the fan motor, or it could be a relay, coolant temperature switch, or circuit-related issue, requiring step-by-step inspection. Here is the relevant introduction: 1. Design: Volkswagen cars feature a classic hatchback trunk lid design, making storage more effortless and convenient. Additionally, over 10 thoughtful detail storage spaces ensure that items in the car are neatly organized. 2. Engine: The Volkswagen car's engine boasts a maximum torque of up to 250N˙m, with power output that is no less impressive than a 1.8L naturally aspirated engine, offering strong acceleration from start and a 0-100km/h acceleration time of just 8.5 seconds, providing a highly enjoyable driving experience.
14
5
Share

How to Cancel the Maintenance Reminder for the CS75?

Method to cancel the maintenance reminder for the Changan CS75: First, turn the car key to the ON position (turn the key twice, or press the start button twice for keyless start). Then, press the selection button on the steering wheel to navigate to the vehicle status, and hold the reset button for about 5 seconds (keep holding the reset button without releasing it). Finally, turn off the power, but remember to keep holding the reset button, then turn the power back on. Below is more information about this vehicle: 1. The CS75 is equipped with Changan's self-developed 1.5TGDI direct-injection turbocharged engine, which significantly improves power performance, with a maximum power of 131KW and a maximum torque of 265N·m. 2. The CS75's body dimensions are: 4650/1850/1705mm.
8
2
Share

What is the idle air flow rate of a car?

The idle air flow rate of a car is approximately 2.5g/s. Below are the detailed explanations regarding the idle air flow rate of a car: 1. Data Statistics: Under normal conditions, the air flow signal data during idle is around 2.5g/s; if it is less than 2.0g/s, it indicates an air leak in the intake system; if it exceeds 4.0g/s, it means the engine is under additional load. The normal air flow value varies for each engine model, with larger displacement engines having higher air flow values. 2. Fault Causes: Since the air flow sensor signal is the primary basis for controlling the air-fuel ratio, an infrared exhaust gas analyzer can be used to measure the exhaust gas composition during engine idle and stable operation at 2000r/min. If the measured values deviate significantly from the standard values, it indicates a fault caused by poor performance of the air flow sensor.
18
5
Share

Why is the Q5L cigarette lighter not working?

The reasons why the Q5L cigarette lighter is not working are as follows: 1. Due to long-term use, repeated insertion and removal may cause the spring clip to loosen, resulting in the cigarette lighter not receiving power. 2. Another possible reason is that repeated insertion and removal or improper use may cause a short circuit in the wiring, burning out the fuse. Below are the repair methods for a non-working cigarette lighter: 1. First, try connecting a cigarette lighter of the same model. If it works normally, the issue is with the lighter itself, and it can be directly replaced. 2. If it still doesn’t work, the problem is likely with the cigarette lighter’s fuse, which can be replaced by yourself as follows: (1) Locate the fuse box for the car’s electrical components. The position of the fuse box varies depending on the car’s brand and model—some are in the storage compartment, while others are under the dashboard. (2) Open the fuse box cover and refer to the fuse location diagram on the inside of the cover to find the cigarette lighter fuse. (3) Use the provided fuse puller to remove the blown fuse and replace it with a new or spare cigarette lighter fuse.
3
0
Share

How to Lift Windshield Wipers?

Follow these steps to lift your car's windshield wipers:
1
4
Share

How to Open the Trunk from Inside the Atz?

Here are the methods to open the trunk from inside the Atz: 1. Unlock the vehicle. 2. Press the trunk release button on the key. Many car models allow direct trunk unlocking via the key—simply press the trunk unlock button on the key. 3. Some models have two additional buttons for the trunk: the left one closes the trunk, and the right one closes the trunk and locks the vehicle. Below are warnings regarding trunk closure: 1. Ensure the trunk is fully closed before driving. This is mainly to prevent the trunk lid from suddenly opening on bumpy or high-speed roads, which could lead to traffic accidents. 2. If the trunk is left open or not securely closed, exhaust fumes and other toxic gases may enter the cabin during driving, which is harmful to the health of the occupants.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.