What is the Scrap Life of Diesel Private Cars?

What is the standard tire pressure for the Cayenne?

The normal standard tire pressure for the Cayenne is: 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and decreased by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard requirements. The recommended tire pressure for the Cayenne can be found in the vehicle's user manual or on the label near the driver's door, fuel tank cap, or storage compartment. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; causes heavy steering and deviation, compromising driving safety; increases movement of tire parts, leading to abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, causing delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction between the tire and ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to tire blowouts. If the tire pressure monitoring indicator lights up (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually triggers an alarm when below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset promptly, the system continues to record the previous data, causing the indicator light to illuminate. Simply reset the tire pressure to resolve this. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged during driving (e.g., by impact), the tire pressure warning light will illuminate. For sensor damage, replacement with a new part is the only solution.

10

3

Share

Which Vehicle Has the Right of Way When Meeting on a Slope?

According to the Road Traffic Safety Law, when two vehicles meet on a narrow slope: if neither vehicle has entered the slope, the downhill vehicle should yield to the uphill vehicle. If the downhill vehicle has already entered the slope while the uphill vehicle has not, the downhill vehicle has the right of way. If both vehicles have entered the slope and one needs to reverse to avoid collision, the uphill vehicle should reverse, as it is easier for an uphill vehicle to reverse. In any case, the vehicle that can reverse more easily should do so. Relevant regulations: Right of way conditions: slow down and keep to the right, maintaining a safe distance from other vehicles and pedestrians; on obstructed road sections, the unobstructed vehicle has the right of way; but if the obstructed vehicle has already entered the obstructed section while the unobstructed vehicle has not, the obstructed vehicle has the right of way; on narrow slopes, the uphill vehicle has the right of way; but if the downhill vehicle has already reached the midpoint while the uphill vehicle has not started ascending, the downhill vehicle has the right of way. Prohibited U-turn situations: motor vehicles are not allowed to make U-turns at locations with no U-turn or no left-turn signs or markings, as well as at railway crossings, pedestrian crossings, bridges, sharp curves, steep slopes, tunnels, or other hazardous sections. Motor vehicles may make U-turns at locations without no U-turn or no left-turn signs or markings, but must not obstruct the normal passage of other vehicles and pedestrians. When reversing, motor vehicles should check the rear situation and confirm safety before reversing. Reversing is prohibited at railway crossings, intersections, one-way roads, bridges, sharp curves, steep slopes, or tunnels.

2

3

Share

What items are required for the driver's license medical examination?

Driver's license medical examination items include height, color discrimination, vision, hearing, upper limbs, lower limbs, trunk, and neck. Height requirements: For large buses, tractors, city buses, large trucks, and trolleybuses, the minimum height is 155 cm. Color discrimination requirements: No red-green color blindness.

12

1

Share

What are the differences between drum brakes and disc brakes?

The differences between drum brakes and disc brakes lie in braking force, heat dissipation performance, drainage function, structure, and cooling effect. Braking refers to stopping a moving vehicle, and the brake is a component in the braking system that generates resistance to the vehicle's movement. Currently, friction brakes are commonly used in vehicles, which utilize the friction between fixed and rotating components to produce braking torque. These brakes are further divided into disc brakes and drum brakes. The specific differences are as follows: Different braking force: In terms of braking force, drum brakes provide significantly stronger braking force than disc brakes. This is not because drum brake technology is more advanced but due to their inherent structural characteristics. In a drum brake system, there is a drum-shaped metal component, which is the core part of the drum brake, hence the name. Different heat dissipation performance: Drum brakes operate in a confined space, resulting in poor heat dissipation. During braking, a large amount of heat accumulates, causing the brake shoes and drum to deform under high temperatures, leading to brake fade and vibration, which reduces braking efficiency. Different drainage function: Drainage is another advantage of disc brakes over drum brakes. When water enters the braking system, its impact on braking performance is evident. If the water cannot be drained promptly, braking performance will significantly decline. The enclosed design of drum brakes is clearly less effective for drainage compared to disc brakes. Different structure: Disc brakes have a compact and simple structure, while drum brakes are relatively more complex. However, drum brakes achieve the same braking force with a much smaller diameter than disc brakes. Different cooling effect: Disc brakes have exposed brake shoes, resulting in better heat dissipation and more stable braking performance. In contrast, drum brakes have brake shoes enclosed within the drum, making heat dissipation difficult. Prolonged braking causes the braking force to diminish as heat increases. Principle of drum brakes: Inside the brake drum, hydraulic pressure acts on the pistons of the brake wheel cylinder, pushing the curved brake shoes outward. Alternatively, friction material attached to the brake shoes presses against the inner surface of the drum, slowing the rotation of the drum and axle to achieve braking. Working principle of disc brakes: Hydraulic oil pushes the brake pads against the brake disc through cylinders, generating friction to brake. Disc brakes installed on high-speed shafts come in two torque specifications: 10,000 N·m and 12,500 N·m. The brake disc diameter is 800 mm. Each brake set has four cylinders controlled by a hydraulic system. The features include high braking torque, excellent heat dissipation, adjustable oil pressure, and stepless variation of braking torque during operation.

17

1

Share

What does cancel mean on a car?

Cancel on a car means to deactivate the cruise control, set is to set the current speed as the cruising speed, and resume is to return to the original cruising speed. The cruise control system is also known as the cruise control device, speed control system, or autonomous driving system. The function of the cruise control system is to automatically maintain the vehicle speed as required by the driver after turning on the switch, without the need to press the accelerator pedal, allowing the vehicle to travel at a fixed speed. With this device, the driver no longer needs to control the accelerator pedal during long-distance driving on highways, reducing fatigue and unnecessary speed changes, which can save fuel.

13

1

Share

Highlander Start-Stop Usage Tips?

The method to use the Highlander's start-stop system is: the start-stop switch is located on the left side of the steering wheel. Press the stop and start cancel button to disable the stop and start system. More information about the Highlander is as follows: 1. The Highlander features a wide body with an innovative and spacious interior, making it a large-sized SUV in the Toyota family. The Highlander comes standard with the highest level of safety equipment in its class. 2. The Highlander is equipped with a 3.5-liter V6 engine that delivers up to 201 kilowatts of power, paired with a stepped 5-speed automatic transmission with manual mode.

7

0

Share

What is the Scrap Life of Diesel Private Cars?

What is the standard tire pressure for the Cayenne?

Which Vehicle Has the Right of Way When Meeting on a Slope?

What items are required for the driver's license medical examination?

What are the differences between drum brakes and disc brakes?

What does cancel mean on a car?

Highlander Start-Stop Usage Tips?

How many meters should the warning sign be placed on ordinary roads?

Is stepping on the accelerator during hill start penalized?

What is the distance for placing warning signs on ordinary roads?

What Are the Symptoms of Faulty Spark Plugs in Sedans?