What is the S13 car?

Which city does the license plate Su B belong to?

Su B license plate belongs to Wuxi City, Jiangsu Province. The license plate codes for cities in Jiangsu Province are as follows: Nanjing is Su A, Wuxi is Su B, Xuzhou is Su C, Changzhou is Su D, Suzhou is Su E, Nantong is Su F, Lianyungang is Su G, Huaiyin is Su H, Yancheng is Su J, Yangzhou is Su K, Zhenjiang is Su L, Taizhou is Su M, and Suqian is Su N. Wuxi City is a prefecture-level city in Jiangsu Province, designated by the State Council as one of the central cities in the Yangtze River Delta region of China. Wuxi City is located in East China, the southern part of Jiangsu Province, and the Yangtze River Delta Plain, making it an important part of the Yangtze River City Cluster.

20

3

Share

What Causes Car Air Conditioning Leakage?

The reason for air conditioning water dripping is the system drainage phenomenon caused by the significant temperature difference before and after the air conditioning cools. Due to the high temperature inside the car, when the cooling system is activated to lower the interior temperature, the moisture in the hot air inside the car condenses on the surface of the evaporator's heat-absorbing fins, which are at a very low temperature. The water droplets are then collected by the evaporator's plastic casing and discharged outside the car. Reasons for water dripping under the car: Water dripping under the car may be due to a lack of antifreeze in the radiator. If this is the case, the cooling system should be checked as soon as possible. Since the muffler is located at the rear of the car where the temperature is relatively low, water vapor will condense into liquid water when it encounters cold. Some of this liquid water is discharged through the exhaust pipe, while another part is discharged through the drainage hole, resulting in the phenomenon of muffler dripping. Reasons for water dripping from the car body: Water leakage from the car body may be due to water dripping from the exhaust pipe. This is because gasoline contains hydrogen elements, which react with oxygen in the high-temperature environment of the cylinder to produce water. However, this water is in the form of water vapor. When the water vapor flows out through the exhaust pipe and encounters cold, it liquefies. Therefore, this is a normal phenomenon. The presence of water drainage from the car's exhaust pipe indicates that the engine is in good working condition, the air-fuel mixture is burning completely, and the efficiency is high.

19

2

Share

Which country is Pirelli tires from?

Pirelli tires are an Italian brand. Pirelli is one of the more famous tire companies, founded in Italy in 1872, and is also a sponsor of the Inter Milan football club. Pirelli has established an Asia-Pacific production base in partnership with China's Huaxin Group in Yanzhou, Shandong. Pirelli's products in China include truck tires, car tires, high-performance racing motorcycle tires, and steel cord. Characteristics of Pirelli tires: 1. The tire tread pattern uses an interlocking fine groove pattern technology, improving performance on both dry and wet roads, ensuring safety and reducing braking distance; 2. Uses environmentally friendly materials in production, reducing environmental impact during both the production phase and the usage cycle; 3. Reduces fuel consumption and CO2 emissions, with fuel savings of up to 4%; 4. Complies with EU noise reduction standards, offering good driving comfort.

5

Share

What Causes a Scooter to Fail to Start After Getting Wet in the Rain?

A scooter failing to start or accelerate after being exposed to rain is usually caused by water entering the air filter, fuel tank, or carburetor, or moisture affecting components such as the ignition coil, high-voltage coil, spark plug cap, ignition switch, or wiring in the ignition system. If the spark plug or high-voltage damping cap has cracks, water can easily seep in during rainy or humid conditions, leading to a short circuit and engine stalling. Carefully inspect the spark plug and high-voltage damping cap connections for cracks or loose connections and replace them if necessary. Special attention should be paid to the electrical wiring of the scooter. If water is present at wire connections or electrical connectors, it can cause a short circuit and stalling. Thoroughly inspect and clean these connections, ensuring all moisture is removed. Use a hairdryer to dry damp areas (move the dryer slowly and avoid focusing on one spot to prevent melting the wiring). The air filter on scooters is typically positioned low and at the rear of the vehicle. If the air filter cover is not tightly secured, water can easily enter and be drawn into the carburetor, causing fuel starvation and stalling. Open the air filter cover to check for moisture and remove it if present. Carburetor icing can also occur. When air humidity exceeds 90%, moisture-laden air passing through the carburetor venturi is rapidly cooled due to fuel atomization, forming ice that blocks or partially obstructs the nozzle, fuel passages, or air passages. This restricts fuel or air flow, leading to poor fuel-air mixture and stalling. In such cases, letting the scooter sit for a few minutes to allow the ice to melt usually resolves the issue.

11

2

Share

How to Choose Between Ford Kuga and Skoda Kodiaq GT?

Comparison between Ford Kuga and Skoda Kodiaq GT: 1. Exterior: The Ford Kuga features a flat and sharp front fascia with a stylish honeycomb grille adorned with chrome accents; the Skoda Kodiaq GT adopts a three-dimensional vertical grille, honeycomb air intake trim, and a rear spoiler. 2. Powertrain: The Ford Kuga offers two engine options—1.5T and 2.0T; the Skoda Kodiaq GT provides three powertrain choices—1.4T and 2.0T in both high and low power versions. 3. Dimensions: The Ford Kuga measures 4524mm in length, 1838mm in width, and 1685mm in height; the Skoda Kodiaq GT measures 4634mm in length, 1883mm in width, and 1649mm in height.

12

5

Share

Where is the license plate with 'Xin D' from?

Xin D is the license plate of Kuitun City in Xinjiang. The license plate codes for various regions in Xinjiang are as follows: Xin A for Urumqi City, Xin B for Changji Hui Autonomous Prefecture, Xin C for Shihezi, Xin E for Bortala Mongol Autonomous Prefecture, Xin F for counties directly under the jurisdiction of Ili Kazakh Autonomous Prefecture, Xin G for Tacheng, Xin H for Altay, Xin J for Karamay, Xin K for Turpan, Xin L for Hami, Xin M for Bayingolin Mongol Autonomous Prefecture, Xin N for Aksu, Xin P for Kizilsu Kirghiz Autonomous Prefecture, Xin Q for Kashgar, Xin R for Hotan. License plates consist of Chinese characters, English letters, and numbers. Their primary function is to identify the region to which the vehicle belongs, and they can also be used to look up the vehicle's owner and registration information.

10

2

Share

What is the S13 car?

Which city does the license plate Su B belong to?

What Causes Car Air Conditioning Leakage?

Which country is Pirelli tires from?

What Causes a Scooter to Fail to Start After Getting Wet in the Rain?

How to Choose Between Ford Kuga and Skoda Kodiaq GT?

Where is the license plate with 'Xin D' from?

What is the step-by-step procedure for starting a manual transmission vehicle in Subject 2?

What Causes Car Air Conditioning Buttons to Malfunction?

What are the contents of the Subject 1 exam?

How to Coordinate the Clutch and Throttle When Shifting Gears?