What is the RPM of the Volkswagen Tiguan when starting?

2 Answers
MacBryce
07/29/25 8:29am
The starting throttle RPM of the Volkswagen Tiguan is 800. Reasons why the engine RPM is high but the vehicle speed does not increase: This happens because there is an issue with the clutch or transmission, and the power generated by the engine is not being transmitted to the wheels. The engine's power is first transmitted to the clutch. If the clutch plate is severely worn or the clutch pressure plate spring is damaged, it can result in the power (RPM) not being fully output, causing a mismatch between the engine's generated power and the output power. Problems can also arise if the transmission is not engaged in the appropriate gear. Typically, such issues are accompanied by difficulties in engaging reverse gear, among others. Reasons for car shaking when starting: First, the fuel system may be obstructed, causing uneven fuel supply at low throttle and resulting in uneven operation of the engine cylinders, leading to shaking. Second, the throttle body may be too dirty, causing uneven air intake and resulting in shaking. Third, issues such as broken or burnt high-voltage wires, or a non-functioning cylinder, can cause the engine to operate unevenly and shake.
Was this review help?
5
1
Share
LeLaura
08/12/25 5:31am
I've just started driving the Volkswagen Tiguan on the road. Usually, I lightly press the accelerator when starting, and the tachometer shows the RPM slowly rising from 1,000 to around 2,000. This way, the car starts smoothly and fuel-efficiently. If I press the accelerator too hard, the RPM surges above 2,500, the engine noise increases, and fuel consumption also goes up. I usually prefer to gently apply throttle after stopping at a red light, keeping the RPM around 1,500, which is ideal. Sometimes, when starting a cold engine, the RPM is slightly higher, around 1,200, but it stabilizes after a few minutes. Additionally, cars with automatic transmissions adjust the RPM automatically based on road conditions. Starting on a slope may require an RPM above 1,800. Overall, the Tiguan starts very steadily, and I recommend that beginners practice gently pressing the accelerator without rushing to high RPMs, as it's both safe and economical. The specific RPM values also depend on individual driving styles. It's best to regularly maintain and check the throttle for carbon buildup to prevent abnormal increases.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

What is the Side Rear Vehicle Alert Function?

Rear vehicle warning light will illuminate, this is the Lane Change Assist system. Below is relevant information: 1. Introduction: During driving, due to vehicle body design, the visual range provided by side mirrors always has some blind spots. Drivers cannot constantly turn their heads, which actually increases driving risks. 2. Principle: The Lane Change Assist system alerts the driver to approaching vehicles from behind through indicators in the left/right mirrors or other locations. This system automatically activates only when changing lanes above 60 km/h, and won't function at lower speeds. It can detect vehicles approaching from up to 50 meters in the side rear area.
6
3
Share

What is the fuel tank capacity of the 2013 Buick LaCrosse?

2013 Buick LaCrosse has a fuel tank capacity of 70 liters, which is the officially announced data. The 2013 Buick LaCrosse 2.0T version requires 95-octane gasoline, while other versions use 92-octane. The fuel consumption per 100 kilometers ranges from 7.2 to 9.9 liters, and a full tank can cover a distance of 707 to 972 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. The fuel level is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments. It is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safety level, and there is still some space from the safety level to the tank opening. This space is reserved to allow for fuel expansion when the temperature rises, preventing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.
5
4
Share

What is the cylinder bore diameter?

The cylinder bore diameter varies from small to large, ranging from 32 millimeters to 250 millimeters, with different cylinders having different bore sizes. The following is an introduction to cylinder bore diameter: Introduction to cylinder bore diameter: In an engine, the piston moves in a reciprocating linear motion within the cylinder, and the diameter of the cylinder is referred to as the bore diameter. Determination of bore diameter: The total traction force, total thrust, and movement speed of the oil cylinder are generally known, and the stroke length is determined by work requirements (it is also considered known, with the length of the oil cylinder preferably not exceeding 20 times its diameter). When the total thrust remains constant, the diameter of the oil cylinder is inversely proportional to the square root of the working pressure. A smaller diameter (for compactness) and lower pressure (for simpler systems and fewer leaks) are desirable. The principle for resolving such conflicting requirements is to select the lowest possible working pressure while ensuring an appropriate diameter size. When determining the size of the oil cylinder, different factors are considered for different types of machine tools, including the determination of the bore diameter. Stroke-to-bore ratio: The stroke-to-bore ratio is the most fundamental and critical structural parameter of an internal combustion engine. It not only significantly affects scavenging quality and heat transfer but also influences the engine's power and fuel consumption rate. Additionally, it affects the structure and size of all components, thereby impacting the engine's vibration, specific weight index, and service life. Stroke gasoline engines generally employ loop scavenging, where fresh mixture is used to expel the remaining exhaust gas from the cylinder through the exhaust port. The more thoroughly the exhaust gas is expelled from the cylinder and the less fresh mixture is lost with the exhaust gas (a situation referred to as good scavenging quality), the greater the engine's power and the lower its fuel consumption rate.
3
0
Share

What does 96Y tire mean?

96Y refers to the maximum load capacity and maximum speed of the tire. 96 indicates that the maximum load capacity per tire is 710kg, so four tires would be 2840kg. Y represents a maximum speed of 300km per hour, which are common maximum load and speed ratings. Extension: The load index indicates the maximum weight a tire can bear under normal inflation conditions. The speed rating is indicated by a letter, ranging from J to Z, where each letter represents the maximum allowable speed of the tire under the corresponding load capacity. These two factors together are referred to as the service description and are interdependent.
13
3
Share

Does an LNG tank need to be vacuumed if it loses insulation?

Generally, an LNG cylinder that loses insulation cannot be repaired. Structurally, an LNG cylinder consists of two layers with a vacuum-sealed interlayer for insulation. Creating this vacuum requires specialized equipment like a vacuum pump. If an LNG cylinder loses insulation, it indicates poor vacuum integrity, and the standard procedure is to return the cylinder to the manufacturer for vacuum reprocessing. Below are specific details about LNG: 1. Fuel System: The fuel systems of LNG vehicles are fundamentally similar. They store LNG in onboard tanks, vaporize it to approximately 0.5MPa gas for engine use via a vaporizer. Key components include the LNG tank, vaporizer, pressure regulator, mixer, and control system. 2. Benefits: Adopting LNG vehicles significantly reduces fuel costs, boosting operational profits. Using cleaner LNG as vehicle fuel drastically cuts tailpipe emissions, delivering substantial environmental benefits. According to BP China's carbon emission calculator, each LNG vehicle reduces CO2 emissions by about 60 tons annually compared to gasoline/diesel vehicles. Over an 8-year lifespan, this translates to roughly 480 tons of CO2 reduction per vehicle.
7
5
Share

What is the fuel tank capacity of the Mercedes-Benz GLE350 in liters?

The fuel tank capacity of the GLE350 is 85 liters, which is the officially announced data. Owners who have purchased the GLE350 can also check this information on the vehicle's configuration sheet. The GLE350 requires 95-octane fuel, with a fuel consumption of 7.4L per 100 kilometers. A full tank of fuel can cover a distance of 1,148 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank at all times. This is typically observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing the tank. If fuel is added up to the tank opening during refueling, the actual amount of fuel may exceed the calibrated tank capacity.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.