What is the RPM of a manual Civic at 120 km/h?

2 Answers
SerenityFitz
07/24/25 7:54am
The RPM of a manual Civic at 120 km/h is around 2000. Car RPM: The RPM of a car has a significant relationship with its fuel consumption per 100 kilometers. The fuel consumption displayed on the dashboard is calculated based on a specific method. The car's computer monitors the fuel injected by the engine's injectors, records the instantaneous fuel consumption at every moment, and then calculates the total fuel consumption and distance traveled. By dividing the total fuel consumption in liters by the distance in kilometers, the fuel consumption per 100 kilometers is obtained. Fuel consumption per 100 kilometers for sedans: Generally, the fuel consumption per 100 kilometers for family sedans is around 6L to 8L, while for SUVs, it is around 8L to 10L. However, the fuel consumption per 100 kilometers always has some margin of error. If the engine operates at high RPM for a long time or accelerates frequently in the low RPM range, the fuel consumption per 100 kilometers will increase.
Was this review help?
10
1
Share
VonRiver
08/11/25 3:34am
I've been driving a manual Civic for several years, often cruising at 120 km/h on highways with RPM around 2500 to 2700, depending on which gear you're using. Generally, 6th gear is the most comfortable, keeping the RPM lower for a quieter and more fuel-efficient ride. I remember driving a newer Civic model once, where the RPM stayed around 2500, and the engine ran so smoothly with almost no noise—much better than the older models I used to drive. The older versions had fewer gears, and if you used 5th gear, the RPM could climb to 2800 or even 3000, increasing fuel consumption. I recommend using 6th gear for cruising whenever possible—it reduces engine load and can even extend engine life. On long trips, keep an eye on the RPM and avoid letting it drop too low or climb too high; maintaining it around 2500 is ideal.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

How to reset the tire pressure warning light on a Haval H6?

Confirm that the key is turned to the 2nd position. Use the menu button on the left side of the steering wheel to display the odometer interface on the instrument panel. Press the up button on the left side of the steering wheel, and the instrument panel will display "RRFI-active-Reactivate: R". Press the (R) button on the instrument panel, which will then display "+" and "-". Press the "+" button on the right side of the steering wheel, wait for 10 seconds, then turn off the key. Restart the vehicle, and the tire pressure warning light will be reset. Related information is as follows: 1. The tire pressure monitoring system is a type of active safety equipment. It can alert the driver in time when there are signs of danger in the tires, prompting them to take appropriate measures, thereby preventing serious accidents. 2. With the tire pressure monitoring system, the tires can always be kept working within the specified pressure and temperature range, reducing tire damage and extending their service life. Data shows that driving with insufficient tire pressure, when the tire pressure is 10% below the normal value, reduces tire life by 15%.
17
4
Share

What are the reasons for insufficient power in the Daewoo 498 engine?

The reasons for insufficient power in the Daewoo 498 engine are as follows: Incomplete fuel combustion: It is relatively normal to experience insufficient power when the engine is cold. During cold starts, incomplete combustion can lead to difficulty in accelerating. If the issue resolves after the engine warms up, there is no problem. When starting a cold engine, use the choke and allow more time for preheating before driving. Related component failures: Check and clean the air filter and carburetor separately. Inspect whether the spark plug is functioning properly, whether the valve clearance is too small, whether there is any air leakage in the intake pipe, whether the gasoline quality is poor, and whether the exhaust pipe is blocked, among other issues. Introduction to motorcycles: A motorcycle is a two- or three-wheeled vehicle powered by a gasoline engine and steered by handlebars to control the front wheel. It is lightweight, flexible, and fast, widely used for patrol, passenger and cargo transport, and also serves as sports equipment. Broadly speaking, motorcycles can be categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes, among others.
9
0
Share

How to Soundproof the New Elysee?

The New Elysee can be soundproofed by installing engine soundproofing cotton or performing a full-vehicle soundproofing treatment, both of which yield excellent results. The methods for car soundproofing modifications are straightforward and include the following points: 1. Install vibration-damping and noise-reducing pads along with moisture-proof sound blankets inside the cabin to alleviate resonance caused by chassis components during high-speed driving and reduce road noise transmitted by tire rotation. 2. Attach velvet sound-absorbing blankets to door trims and install door soundproofing strips to enhance sealing, minimizing resonance and reducing wind noise at high speeds. 3. Apply soundproofing materials to the front and rear wheel fenders to decrease noise from shock absorbers during driving and suppress impact noise generated by tires, road surfaces, and metal panels. 4. Paste fireproof soundproofing blankets on the engine hood to absorb engine operation noise. How to modify car soundproofing? Strengthen the rigidity below the A, B, and C pillars and reinforce the rear seat side panels to improve the structural rigidity of the body, effectively reducing noise. 5. Adhere a layer of heat-insulating and soundproofing cotton to the cabin ceiling to effectively block intense sunlight, prevent a rapid rise in cabin temperature, and reduce resonance from roof panel vibrations.
1
5
Share

What brand is the sports car with a dragonfly logo?

The sports car with a dragonfly logo is the QIANTU (Qiantu Motors). The debut model of Qiantu Motors is the Qiantu K50 pure electric supercar. More information about Qiantu Motors is as follows: 1. Body dimensions: The length, width, and height are 4634mm*2069mm*1253mm, with a wheelbase of 2650mm. In terms of size, it belongs to the large type among sports cars. The waistline on the door extends to the front of the rear wheel. 2. The total body weight is only 234 kilograms. Except for some key rigid components, the entire frame of the car is made of aluminum alloy, which reduces weight while providing sufficient torsional and bending stiffness to ensure a certain level of handling. In addition to the lightweight design of the frame, the exterior body panels, except for the easily damaged front and rear bumpers made of traditional plastic, are all constructed from carbon fiber composite materials, with a total weight of only 46.7 kilograms. 3. Interior design: It adopts the mainstream minimalist design of current electric vehicles, with basic functions integrated into a large screen. The interior design still follows the traditional T-shaped center console structure, generally leaning towards the driver's side. The interior extensively uses carbon fiber materials for lightweighting, along with leather and Alcantara materials. The center console features a large area of suede, and the screen has a waterfall-style design. Two large screens are used to create a so-called sense of luxury and technology.
19
1
Share

How many seconds does the XPeng G3 take to accelerate from 0 to 100 km/h?

XPeng G3 accelerates from 0 to 100 km/h in 8.3 seconds. More details about the XPeng G3 are as follows: 1. The XPeng G3 is an intelligent vehicle. On January 10, 2018, Beijing time, the XPeng G3 made its global debut at the CES International Consumer Electronics Show in the United States, marking the first mass-produced internet car launched by a Chinese new automaker at CES. On December 12, 2018, the XPeng G3 was officially launched in Guangzhou, with the first batch of 24 vehicles delivered on-site, including Alibaba partner Yu Yongfu as the first owner. 2. The vehicle features a sharp and aggressive design with clean, bold body lines: the LED light sword headlights and the wide, sharp front lip form a 'shark-like' front face without a traditional grille. Design elements such as the 'blade' wheels, red brake calipers, floating roof, signature ducktail spoiler, and 'red storm' matrix-style full-width taillights keep the G3 in a dynamic stance, embodying a bold and exploratory attitude. 3. Equipped with an Italian-imported panoramic windshield, it is the first internet car in China to adopt a 'space cockpit' design, effectively balancing driving safety requirements with passenger emotional needs. The expansive view allows for panoramic scenery, helping the driver seamlessly integrate with the surrounding environment.
17
3
Share

What are the items included in a car's second maintenance?

Car's second maintenance mainly includes the following items: replace the three filters and engine oil; check whether the brake fluid, transmission oil, and power steering fluid should be replaced; inspect brake pads, tires, shock absorbers, and suspension; check spark plugs, throttle valve, and fuel supply system; perform front and rear wheel rotation and routine checks (lights, battery, etc.). Extension: 1. The scope of the second maintenance, in addition to the tasks of the first maintenance, includes checking and adjusting the working conditions of the engine and electrical equipment, dismantling and cleaning the oil pan and oil filter, checking and adjusting the steering and braking mechanisms, dismantling and cleaning the front and rear wheel hub bearings. Add lubricating oil, dismantle and inspect tires, and perform rotation, etc. The purpose is to maintain the good working performance of various parts, mechanisms, and assemblies of the vehicle to ensure their normal operation between two second-level maintenances. 2. For the car's second maintenance, there is no need for other replacements and cleaning, such as engine cleaning. It is too early to perform these items during the second maintenance, which is both a waste of money and time. Other inspection items, such as checking coolant, brake fluid, tire pressure, etc., are generally free. Note here to remind all car owners, before the second maintenance, be sure to carefully review the maintenance list, and it is recommended not to perform unnecessary items.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.