What is the RPM of a Honda CR-V at 120 km/h?

1 Answers
BrantleyRose
07/29/25 7:38pm
Lower on downhill roads, higher on uphill roads. Around 2000 RPM on flat roads. Introduction to Gear Ratio: Automotive transmission ratio, also known as gear ratio, refers to the ratio of rotational speeds between two transmission mechanisms before and after the gearbox in a vehicle's drivetrain. There are two types of gear ratios in a vehicle's drivetrain: the final drive ratio and the gearbox ratio. For the same vehicle model, the final drive ratio is a fixed value, and gear ratio data for various types of vehicles can be found in automotive performance manuals. Comparison of Gear Ratios: Different gears in the transmission have different gear ratios, and the final drive gear ratios in differentials also vary between different vehicles. A higher gear ratio results in slower speed but greater torque, while a lower gear ratio results in higher speed but reduced torque.
Was this review help?
17
5
Share
More Forum Discussions

How to Measure Air Conditioning Pressure with a Pressure Gauge?

Pressure gauge measurement method for air conditioning pressure: 1. Inspect and clean the detection joints of the air conditioning system and the high/low pressure connection joints on the air conditioning pressure gauge; 2. Check the air conditioning pressure gauge to ensure both high and low pressure valves are properly closed and all connection joints are securely fastened; 3. Turn off the engine and air conditioning, then connect the high and low pressure hoses of the pressure gauge to the high and low pressure service ports using quick-connect fittings; 4. Start the engine and turn on the air conditioning, then read and record the high and low pressure values; 5. Turn off the air conditioning and engine, then disconnect the pressure gauge from the service ports; 6. Inspect the service ports on the vehicle's air conditioning refrigeration system for any signs of leakage.
10
5
Share

Can You Drive Without Engine Coolant?

You cannot drive without engine coolant. Lack of engine coolant will affect the radiator's heat dissipation performance, failing to achieve the required cooling effect. Without proper coolant circulation, the engine will overheat, and in severe cases, it may cause engine damage. The functions of coolant include: 1. Anti-corrosion; 2. High boiling point; 3. Prevention of scale buildup; 4. Anti-freeze. Methods to check for insufficient coolant in a car are: 1. Start the vehicle and let the system perform a self-check. Look at the vehicle dashboard, where there will be a fluid level indicator; 2. Pull the handle inside the driver's seat to open the hood, then check the coolant reservoir, which has markings for high and low levels.
14
4
Share

How to Open the Car Door with a Spare Key?

Spare car keys open the door by inserting them directly into the keyhole on the door. The spare key does not have a remote control and serves the following purposes: 1. Used when the primary key is lost; 2. Handed to technicians for test drives during maintenance. Precautions for using car keys include: 1. Avoid contact with magnetic objects; 2. Avoid exposure to high-temperature environments; 3. Avoid hanging with other keys or accessories; 4. Replace lost keys promptly to prevent property loss; 5. Do not leave the spare key inside the car; 6. Prevent smart keys from falling or being impacted; 7. Ensure the correct battery model when replacing key batteries.
1
0
Share

What is the original tire size of the Kia K4?

The original tire size of the Kia K4 is 215/50R17. The Kia K4 is a mid-sized 4-door 5-seater sedan with body dimensions of 4720mm in length, 1815mm in width, and 1465mm in height, with a wheelbase of 2770mm and a fuel tank capacity of 62 liters. The Kia K4 is equipped with a 1.6T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 129 kW at 5500 rpm and a maximum torque of 265 Nm between 1500 to 4500 rpm. It features front-wheel drive, with a front MacPherson strut independent suspension and a rear multi-link independent suspension.
1
0
Share

Can an automatic transmission car be turned off without shifting to P gear?

An automatic transmission car cannot be turned off without shifting to P gear. The correct procedure is: 1. After the car enters the parking position, press the brake and shift the gear lever to N gear; 2. Engage the handbrake, release the foot brake, turn off the engine, and then shift the gear lever to P gear. P gear is the parking gear of an automatic transmission, which mechanically locks the wheels to prevent rolling and avoid unnecessary accidents. Other gears of an automatic transmission car are: 1. R gear is the reverse gear; 2. N gear is the neutral gear; 3. D gear is the drive gear, also known as the forward gear; 4. L gear is the low gear; 5. S gear is the sport mode; 6. M gear is the manual mode.
16
5
Share

How Often Should a New Car Be Serviced?

New cars should be serviced every 5,000 kilometers or every six months. The maintenance items for a car include: 1. Replacing the engine oil, oil filter, cabin air filter, and engine air filter; 2. Checking if all fluids meet the required standards; 3. Inspecting whether the lights, chassis, and braking system are functioning properly; 4. Checking and tightening the wheel and hub nut connections; 5. Adjusting the idle speed and idle mixture pedal clearance; 6. Checking the tightness of the engine cylinder head screws. Car maintenance refers to the regular preventive work of inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle. Its purpose is to maintain a clean appearance, ensure normal technical conditions, eliminate potential hazards, prevent failures, slow down the deterioration process, and extend the service life.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.