···
Log in / Register

What is the rim size of the Geely Emgrand?

3 Answers
LeAdalynn
09/01/25 2:56am
Geely Emgrand rims come in 16-inch, 17-inch, and 18-inch sizes. Here is a detailed introduction to the rim dimensions of the Geely Emgrand: 1. The rim is the rotating part of the wheel where the tire's inner contour connects to the wheel hub via pillars, serving as the metal component mounted on the axle that supports the tire. 2. Taking the 2021 manual comfort model of the Geely Emgrand as an example, its body dimensions are: length 4632mm, width 1789mm, height 1470mm, with a wheelbase of 2650mm, a fuel tank capacity of 50 liters, and a trunk capacity of 680 liters. The 2021 manual comfort model of the Geely Emgrand features a MacPherson strut front suspension and a torsion beam rear suspension.
Was this review help?
10
3
Share
McBlakely
09/13/25 5:50am
I've been driving a Geely Emgrand for many years, and the common wheel sizes are 15 inches or 16 inches, depending on the model configuration. For example, the base version usually has 15-inch wheels, while the GL version might use 16-inch ones. When choosing wheels, the material is important—most are made of aluminum alloy, which is lightweight, stylish, and easier to maintain. I often check the tire label to confirm the size to avoid incorrect replacements that could affect driving. If unsure, just refer to the vehicle manual—wrong sizes can lead to unstable handling or increased fuel consumption. Smaller wheels offer a more comfortable ride in the city with less bumpiness over speed bumps, while larger ones provide better stability on highways. Safety-wise, it’s important to regularly clean the wheels to prevent rust. Ultimately, choose what suits your habits best for peace of mind.
Was this review help?
6
2
Share
Expand All
DiAiden
10/27/25 6:37am
As an enthusiastic car modification enthusiast, I often tinker with the wheel rims of my Emgrand. The standard version usually comes with 15-inch rims, while the high-end version features 16-inch ones. Upgrading to 17 or 18 inches can make the car look cooler, but you need to be cautious about size compatibility issues. Installing rims that are too large may cause them to rub against the fenders or affect braking performance. It's also important to match the tires properly to avoid speedometer inaccuracies. From my experience, aluminum alloy rims are lighter, more fuel-efficient, and more durable than steel ones. For maintenance, I recommend regularly checking the wheel balance to prevent vibrations at high speeds. Overall, sticking to the factory size is the safest option—don't casually upgrade to larger rims.
Was this review help?
6
3
Share
Expand All
More Forum Discussions

Why is it difficult to capture illegal U-turns?

Illegal U-turns may be difficult to capture when they occur in the absence of no U-turn signs or dedicated U-turn traffic signals. Scenarios where U-turns are prohibited: Intersections marked with no U-turn signs; if the road centerline is a solid line, whether it's a single yellow line or double yellow lines, U-turns are prohibited; no-left-turn intersections prohibit U-turns; U-turns are forbidden at pedestrian crossings along road sections. Precautions for U-turns: U-turns are prohibited at pedestrian crossings. Although pedestrian crossings in road sections with traffic separation barriers may not have no U-turn traffic signs, pedestrians have the right of way, and pedestrian crossings are treated as prohibitive signs. Any U-turn at a pedestrian crossing will be penalized as an illegal U-turn at a prohibited location.
10
4
Share

What to Do If You Accidentally Fill 95 Gasoline with 92?

If you accidentally fill 95 gasoline with 92, it's generally not a problem to mix them occasionally. Mixing different grades and types of gasoline won't cause noticeable issues in the short term. Problems like carbon deposits and fuel line blockages are caused by long-term mixing. After mixing different grades of gasoline, no special maintenance is required. Simply refill with the appropriate grade of gasoline as specified by your vehicle when conditions permit. The octane levels of 95 and 92 gasoline are different, with varying amounts of anti-knock agents added. 95 gasoline has a slightly higher proportion of anti-knock agents compared to 92. The quality of both types of gasoline is exactly the same, and there is no difference in cleanliness. The only difference lies in the amount of anti-knock agents added, which is designed to meet the different anti-knock requirements of engines with varying compression ratios.
6
0
Share

What is the normal engine idle speed for a car?

Generally, the normal idle speed for a sedan ranges from 700 to 900 RPM. Below is relevant information about car idle speed: 1. Definition: Idle speed refers to the engine operating without any load, only overcoming internal friction resistance without delivering power output. The minimum stable engine speed under these conditions is called idle speed. The idle speed can be adjusted by modifying the throttle opening size, with the optimal idle speed being the lowest RPM at which the engine doesn't vibrate. 2. Idle performance: Car engine idling is one of the engine operating conditions. The idle performance significantly impacts emissions, fuel consumption, and driving comfort. The engine speed during idling is called idle speed, which shouldn't be too high or too low - excessively high idle speed increases fuel consumption, while excessively low speed causes unstable engine operation.
10
0
Share

What does it mean when a wrench light comes on in a car?

A wrench light coming on in a car is a reminder to the owner that maintenance is due. The wrench indicator on the dashboard is a maintenance reminder light. This light functions like a timer, alerting the owner when it's time for maintenance, and does not indicate a fault. Typically, after maintenance is completed, the service staff will reset the maintenance light. If the light remains on after maintenance, you can also reset it yourself. Many modern vehicles allow this to be done via buttons on the multifunction steering wheel by selecting the appropriate menu option to enter the maintenance interface on the dashboard and resetting it. The method to reset the maintenance light varies by vehicle brand and model, and the standard procedure can be found in the user manual. Regular vehicle maintenance includes eight key items: engine oil, oil filter, transmission fluid, spark plugs, cabin air filter, engine air filter, fuel filter, and brake fluid.
16
2
Share

Where is the OBD interface of Citroen C5 located?

The OBD interface of Citroen C5 is located inside the armrest box. The car's OBD interface can detect the working condition of the engine's electronic control system and other functional modules of the vehicle during operation. By connecting the car's OBD interface to a computer, you can view car data, detect car faults, and also perform operations such as car repairs, function development, and equipment modification. The Citroen C5 is a model under Dongfeng Citroen, with body dimensions of 4805mm in length, 1860mm in width, and 1458mm in height, and a wheelbase of 2815mm. In terms of appearance, the Citroen C5 features a continuous arc from the hood to the rear of the car, and from the A-pillar to the C-pillar; combined with the slightly raised waistline, it looks very smooth from the side.
6
3
Share

What is the principle of the idle valve?

When the engine coolant temperature is low, the idle control valve opens to achieve an appropriate idle speed. The engine computer controls the position of the idle control valve plunger by varying the signal intensity transmitted to the idle control valve, based on different coolant temperatures. Below is an introduction to the idle valve: 1. Location of the idle valve: The standard English name is (Auxiliary Air Regulator). The idle control valve is installed on the throttle bypass air passage. 2. Structural principle of the idle valve: It consists of a rotor made of permanent magnets, a stator composed of excitation coils, a feed screw that converts rotary motion into linear motion, and a valve, among other components. It utilizes the step signal provided by the system for conversion control, allowing the rotor to rotate either forward or reverse, thereby enabling the valve core to extend or retract. This adjusts the cross-sectional area of the bypass air passage to stabilize the idle speed and achieve the desired idle RPM.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.