What is the rhyme about Accord, Teana, and Camry?

1 Answers
BrookeMarie
07/29/25 6:58pm
Thin skin with big filling, three fragile ones: Accord, Teana, and Camry. Specific introductions are as follows: 1. Accord: As Honda's mid-size family sedan, the Accord plays a pivotal role in Honda's sales. This car has evolved from its original prototype to the current fastback design, and after more than a decade of changes, it has firmly established itself in the mid-size car market. 2. Teana: The Teana has undergone many changes over the years, especially in exterior design and interior, transforming from an outdated design to a much younger look. It adopts Nissan's latest family front face introduced in recent years, making it universally appealing. The interior has also improved, with more user-friendly designs. 3. Camry: Since the launch of the new Camry, it has been favored by many consumers. Its powertrain has been upgraded, and the exterior design has become much younger, hailed as a perfect design, with sales continuously rising.
Was this review help?
6
4
Share
More Forum Discussions

Can I continue taking the test after failing the second subject three times?

If you fail the second subject three times, you can still continue taking the test with two more attempts. Below is relevant information about the second subject: 1. Introduction: The second subject, also known as the small road test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the field driving skills test. For small vehicles C1 and C2, the test items include five mandatory components: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving along a curve. 2. Passing criteria: The full score is 100 points, with evaluation standards set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. Passing the test requires meeting the specified criteria. 3. Score confirmation: The second subject test can be taken once, and if failed, a retake is allowed. If the retake is not attended or still results in failure, the test is terminated, and the applicant must reschedule the test after ten days. Within the validity period of the driving skills test permit, the number of scheduled tests for the second subject and the third subject (road driving skills test) must not exceed five times. If the fifth scheduled test still results in failure, the scores of other subjects that have been passed will be invalidated.
18
1
Share

What are the reasons for frequent DPF regeneration?

DPF regeneration occurs frequently due to the following reasons: 1. Use of poor-quality gasoline: Inferior gasoline contains a large amount of impurities and carbon compounds, which leads to increased particulate matter in the vehicle's exhaust, naturally causing the DPF to clog more easily; 2. Not using low-ash engine oil: Low-ash engine oil contains very few impurities and is more suitable for use in China VI vehicles. If low-ash engine oil is not used, the likelihood of DPF clogging increases; 3. Long-term low-speed driving: Driving at low speeds reduces the combustion efficiency of the vehicle's fuel, resulting in an increase in fine particles in the exhaust pipe.
5
4
Share

What happens if a small amount of water enters the engine intake?

If the air filter is found completely dry upon inspection, it indicates no signs of water entering the intake system. Below is relevant information about engines: 1. Introduction: An engine (Engine) is a machine capable of converting other forms of energy into mechanical energy. The first external combustion engine was invented by R. Stirling in the UK (Scotland) in 1816, later improved by Watt into the steam engine. 2. Application Scope: Engines can refer to both power generation devices and entire machines including power units (e.g., gasoline engines, aircraft engines). Types include internal combustion engines (e.g., gasoline engines), external combustion engines (e.g., Stirling engines, steam engines), gas turbines (used in racing cars), electric motors, etc.
5
5
Share

What is the wading depth of the Passat?

The wading depth of the Passat is 350mm. The wading depth of the Passat is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Passat is below the water level while wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the engine from automatically restarting if the vehicle stalls in water, which could cause severe damage due to water ingress; Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow it at a low speed, avoiding sudden acceleration or deceleration; On roads prone to water accumulation, use warning water level markers, trees, or the wheels and doors of other vehicles as reference points to estimate the water depth before deciding whether to proceed; Know your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed and choose an alternative route instead.
20
2
Share

What Causes Engine Shaking When Driving Through Water Without Stalling?

Driving through water without stalling proves that the car's engine did not take in water. The shaking is likely caused by water entering the exhaust pipe, affecting the exhaust. If you're unsure, you can check whether the air filter has taken in water. If the air filter is dry, it indicates no water intake, and you can continue using the vehicle with confidence. If the filter is wet, simply replace it. The correct method for driving through water: 1. Slow down or stop to observe: When encountering standing water while driving, if the water level exceeds two-thirds of the bumper or tire height, there is a certain risk in proceeding. Additionally, driving too fast through water can cause splashes to enter the cabin through the engine compartment or chassis. Assess the water level—if it's high, try to detour and avoid forcing your way through. 2. Do not stop or shift gears: When driving through water, maintain a steady speed in low gear with moderate to high throttle. Drive at a low speed and avoid stopping, shifting gears, or releasing the throttle. 3. Do not restart the engine: If the car stalls in water, take measures to tow it to a safe location with less water as soon as possible. Never restart the engine to avoid damaging it. 4. Remove brake pad moisture promptly: This prevents the vehicle from losing braking ability after driving through water, which could lead to danger or accidents.
14
3
Share

What is the difference between manual-automatic transmission and dual-clutch transmission?

There are three main differences between manual-automatic transmission and dual-clutch transmission: 1. In terms of concept, dual-clutch is both a manual transmission and an automatic transmission, while manual-automatic combines manual and automatic shifting: Dual-clutch transmission belongs to both manual and automatic transmissions, offering the flexibility of manual transmission and the comfort of automatic transmission while providing uninterrupted power output; Manual-automatic transmission integrates manual and automatic shifting functions into the same vehicle. 2. Different structural approaches: Dual-clutch has two sets of transmissions, while manual-automatic combines manual and automatic transmissions: Dual-clutch can be used separately, whereas manual-automatic operates together. 3. Different functions: Dual-clutch ensures smooth starting and seamless shifting, while manual-automatic reduces the impact of manual shifting on the vehicle's drivetrain: Dual-clutch transmission guarantees smooth vehicle starts and seamless gear changes, while manual-automatic transmission minimizes the impact of manual shifting on the drivetrain, thereby extending vehicle lifespan, improving ride comfort, allowing appropriate gear selection based on road conditions to keep the engine operating optimally, and reducing driver fatigue.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.