···
Log in / Register

What is the required distance for pulling over in the subject three driving test?

4 Answers
AlejandroDella
09/06/25 4:00am

In the subject three driving test, the regulation requires parking within 30 centimeters of the curb. Below is relevant information about pulling over in the subject three test: 1. Required distance for pulling over: "Pulling over" is a key point in subject three, requiring the wheels to be within 30 centimeters of the right edge of the road after parking. This must be completed in one attempt without touching the edge line. While this task may not seem difficult, parking quickly and accurately within 30 centimeters of the curb requires skill. 2. Techniques for pulling over: Generally, you first need to find your reference point—the point where the car is 30 cm from the edge line after parking. Since everyone's height is different, this point varies. You can ask your instructor to help you find this point by parking the car 30 cm from the edge line. You can use the wiper, a mark on the car window, or align the front of the car with the edge line. Then, simply move the car slowly toward the edge, align the found point with the edge line, straighten the steering wheel, and adjust the car's position. Before stopping, check the right rearview mirror; if the door handle is close to the edge line, you can stop.

Was this review help?
11
4
Share
LeCourtney
09/18/25 3:57am

The regulation for the roadside parking in Subject 3 requires the parking position to be within 30 centimeters from the roadside line. As a driving instructor, I've seen too many students lose points for inaccurate parking. 30 centimeters is about the width of a basketball. During practice, it's helpful to use the front of the car or the rearview mirror to visually align. In the test, the examiner will use a ruler to measure, and parking too far or too close will result in point deductions. I advise students to maintain a slow speed and adjust the direction gradually, not rushing to complete the action. During regular training, I emphasize practicing empty parking multiple times to get a feel for spatial distance and familiarize oneself with the characteristics of the curb. Inaccurate parking not only affects the test pass rate but can also pose dangers on actual roads, such as occupying lanes and affecting traffic. Remember, safe driving starts with these details.

Was this review help?
17
1
Share
Expand All
StChristian
11/01/25 4:24am

I just passed the third driving test, which required parking within 30 centimeters of the roadside. I practiced this many times before the exam to master it. The instructor taught me to align the wiper node or the edge of the right rearview mirror with the roadside line and slowly glide into position. On the day of the test, I successfully parked right in the middle. Thirty centimeters sounds very short, but after practicing, I realized that moving just a few centimeters more could make a difference. Beginners often make mistakes by parking too far away, occupying the road and losing points, or too close and scraping the tires. I recommend simulating test scenarios more often and staying relaxed without tension. Parking skills are also important for daily driving, such as avoiding water hazards on rainy days.

Was this review help?
20
1
Share
Expand All
Leonard
12/15/25 4:35am

As a long-term solution to traffic issues, maintaining a parking distance within 30 centimeters in Subject 3 is a safety requirement aimed at ensuring the vehicle does not obstruct other traffic or encroach on pedestrian areas. Parking too far may cause accidents, such as blocking the road; parking too close may damage tires or curbs. The test strictly measures this to ensure compliance, and drivers should practice precise parking to enhance spatial awareness. In daily driving, this skill can improve road safety.

Was this review help?
19
2
Share
Expand All
More Forum Discussions

What Causes Frost on the Inside of Car Windows?

Frost forming on the inside of car windows occurs due to a temperature difference between the interior and exterior of the vehicle, which leads to the formation of water vapor inside the car. When the interior temperature gradually drops to match the exterior temperature, the water vapor on the glass freezes. The method to remove frost from the inside is: after the engine's water temperature rises, use the heater to blow warm air onto the windshield until the ice layer melts. Relevant information about car windows is as follows: 1. Introduction: Car windows (car-window) are an essential part of the vehicle body, designed to meet the needs of interior lighting, ventilation, and visibility for drivers and passengers. 2. Window Names: Car windows are categorized by the installation position of the glass: front and rear windshields, side windows, and door windows. The design, structure, and quality of car windows significantly impact the driver's visibility, passenger comfort, aesthetic appearance, and aerodynamic characteristics.
19
1
Share

Is the Volkswagen Lock Sound a Hidden Feature?

Volkswagen lock sound needs to be activated at the 4S shop by enabling the 5030 Volkswagen hidden function. Below are the specific details about car horns: 1. Function of Car Horns: The horn is the audio signal device of a car. During driving, the driver can emit necessary audio signals as needed and in accordance with regulations to warn pedestrians and alert other vehicles, ensuring traffic safety. It is also used for urging and signaling. 2. Working Principle: The sound is produced by the vibration of a metal diaphragm using the airflow of compressed air. Therefore, it can only be used in vehicles equipped with an air compressor. Generally, it is installed in large buses and heavy-duty trucks, especially for long-distance transport vehicles driving in mountainous areas or curves, where honking can effectively alert pedestrians and drivers of oncoming vehicles.
9
2
Share

Can Paint Chips Be Repaired Without Trace?

Paint chips can be repaired without leaving traces. Methods are as follows: 1. Wax Repair: For minor scratches on the paint surface that are at the top layer of the clear coat, they can be completely repaired by waxing. Use a compound to treat the area, wiping in straight lines, then apply wax. Start with coarse wax, then apply fine wax from the inside out. 2. Toothpaste Repair: Gently apply toothpaste to shallow scratches, then wipe counterclockwise with a soft cloth. After several applications, this not only reduces the scratches but also prevents air from corroding the damaged paint area. 3. Touch-up Paint Pen Repair: For slightly larger scratches, a touch-up paint pen can be used. Before use, shake the paint inside the pen well. Apply the base coat like nail polish. You can add a certain amount of thinner to the touch-up pen to ensure smooth spraying. Carefully spray the area that needs repair. After the touch-up paint dries, apply fine wax.
17
0
Share

Is the X-Trail a four-wheel drive?

The X-Trail has a four-wheel-drive version, which is equipped with an on-demand four-wheel-drive system and uses a multi-plate clutch-type central differential. Vehicles with an on-demand four-wheel-drive system do not always have power to all four wheels; most of the time, these vehicles operate in two-wheel drive and only switch to four-wheel drive under special circumstances. The X-Trail has a body length, width, and height of 4630mm, 1785mm, and 1685mm respectively, with a wheelbase of 2630mm. The waistline running from the headlights to the taillights gives the vehicle a smooth and sleek appearance, with uniform seams both inside and out. The integrated tailgate trim enhances the smooth transition between the tailgate and rear bumper. In terms of power, the X-Trail is equipped with a 2.5-liter inline-four engine featuring CVTC (Continuous Variable Valve Timing Control), delivering a maximum horsepower of 180 and a peak torque of 245 Nm.
4
3
Share

What does SOC mean in Baoluda electric vehicles?

In electric vehicles, SOC stands for the state of charge, which refers to the remaining battery power. The difference between pure electric vehicles and fuel vehicles: Lies in four major components: drive motor, speed controller, power battery, and onboard charger. Compared to gas stations, there are public ultra-fast charging stations. Electric vehicles refer to: Vehicles powered by onboard power sources, using motors to drive the wheels, and meeting all requirements of road traffic and safety regulations. Advantages of electric vehicles: Environmentally friendly, as they do not produce exhaust gases during operation, no tailpipe pollution, low noise, the noise generated is almost negligible. Economical, with low usage costs, only about one-fifth of gasoline vehicles. Moreover, they have high energy conversion efficiency, can recover energy during braking and downhill driving, easy maintenance, as they use motors and batteries for driving. Policy advantages, such as higher lottery winning rates for license plates, exemption from purchase tax, are quite significant.
19
5
Share

Why Can't I Shift Gears in My Subaru?

When shifting gears, the brake pedal was not pressed. Types of car gears: Manual transmission, automatic transmission. Gear descriptions: P (Parking) - The P gear is used for parking. It employs a mechanical device to lock the rotating parts of the car, preventing movement. R (Reverse) - The R gear is used for reversing. Unlike manual transmission cars, automatic transmission cars cannot use semi-clutch, so special attention must be paid to accelerator pedal control when reversing. N (Neutral) - The N gear can be used during startup, towing, or temporary stops (e.g., at a red light). To prevent the vehicle from rolling on a slope, always press the brake when in neutral. D (Drive) - The D gear is the forward driving gear. In this gear, the transmission automatically shifts between 1st and overdrive (equivalent to 1st to 4th gear) based on speed and throttle conditions, and is used for normal road driving.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.