···
Log in / Register

What is the replacement tutorial for the Teana's cabin air filter?

3 Answers
VanAna
07/30/25 2:45am
The replacement tutorial for the Teana's cabin air filter is: 1. Remove the glove box; 2. From the left side, you can see the cover of the cabin air filter, remove the clip below, and pull out the cover; 3. Take out the old cabin air filter and replace it. Taking the Teana 2.0L EX Fashion Edition as an example, it is a medium-sized 4-door 5-seater sedan with body dimensions of: length 4901mm, width 1850mm, height 1450mm, wheelbase 2825mm, and fuel tank capacity 61.3L. The Teana 2.0L EX Fashion Edition is equipped with a 2.0L naturally aspirated engine, with a maximum power of 115kW and a maximum torque of 197Nm. It adopts a front-engine front-wheel-drive layout, with a front suspension using MacPherson strut independent suspension and a rear suspension using a trapezoidal control arm multi-link independent suspension.
Was this review help?
9
5
Share
FernandoFitz
08/16/25 9:02am
Changing the air conditioning filter for my Teana was actually quite fun. After buying the right filter online, I simply opened the glove compartment on the passenger side and found a small cover underneath—it popped right open when I pulled it. Inside was the old filter, covered in dust, probably used for a year or two. When installing the new filter, make sure the arrow points in the direction of airflow, or the efficiency will drop. The whole process took about ten minutes, no tools needed—saving money while keeping the AC healthy. I often teach friends how to do it themselves, and the air in the car feels fresher afterward, which is better for breathing. Remember to check it every six months or 10,000 km—replace the filter if it's dirty to prevent bacteria buildup. The AC also cools better in hot weather, so don’t wait until bigger issues arise.
Was this review help?
20
1
Share
Expand All
Aragorn
10/21/25 8:05am
As a DIY-loving car owner, I find replacing the cabin air filter quite beginner-friendly. The design of the Teana is thoughtful - the filter is located beneath the glove box, easily visible after opening the compartment door and pulling out the storage tray. The old filter usually appears pitch black; after removal, just clean the dust accumulation area. When installing a new one, simply choose the correct size and ensure the arrow points toward the vehicle interior. This task has zero entry barrier - doing it yourself saves money while acquiring new skills. I recommend purchasing OEM filters online, which cost half the price of dealership replacements. Always replace promptly when noticing AC odors to protect your family's health and maintain stable vehicle performance.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

What to Do When Wiper Blades Don't Clean Properly?

Here are the reasons why wiper blades don't clean properly: 1. Dirty windshield: Inadequate cleaning of the windshield during regular car washes can leave sticky particles on the glass, preventing the wiper from cleaning effectively and potentially damaging it. The solution is to visit a car wash for a thorough windshield cleaning. 2. Hardened wiper blades: Aging wiper blades can harden. You can replace them with new ones or clean the wiper with a lubricant. 3. Misaligned wiper arm: Adjust the angle of the wiper arm. Use an adjustment wrench to hold the wiper and gently rotate it to align it properly, or seek professional help at a repair shop. 4. Frozen wiper blades: Wiper blades, usually made of rubber, can freeze and harden in cold winter temperatures. After starting the car, direct some warm air to the windshield to raise its temperature slightly before using the wipers.
20
3
Share

How to Deal with Frost on Cars in Winter?

Here are the methods to handle frost on cars in winter: 1. Turn on the car's air conditioning and set it to external circulation or direct the vents toward the windows. 2. Use a specialized plastic scraper for removing frost and snow from vehicles, gently scraping the frost off the glass in one direction. A bank card can also serve as a substitute, but be careful to avoid scratching the glass. 3. Apply a specialized vehicle defroster spray onto the frosted windows. Vehicle defroster sprays are high-speed anti-ice concentrated solutions designed to thaw frozen windows and wipers without damaging the car's surface, and they help prevent re-freezing. 4. Use a dedicated frost cover to shield the car. 5. Open the car doors to ventilate and equalize the temperature inside and outside the vehicle.
13
0
Share

How to Turn On the Rear Window Wiper?

The method to turn on the rear window wiper mainly includes: 1. Adjust the wiper switch forward and backward to switch between front and rear wipers, and adjust up and down to change the wiper speed. 2. Push the wiper switch one notch toward the driver to adjust the front windshield wiper, and push another notch to activate the front windshield cleaning function. 3. Push the switch one notch toward the front of the car to adjust the rear glass wiper, and adjust the wiper speed by moving it up and down after pushing the notch. Additional note: It is recommended not to use the rear window wiper frequently because the rear window is more prone to accumulating dust and dirt, and it does not have a cleaning function. Using it on non-rainy days may cause scratches on the glass.
15
1
Share

How to reset the maintenance light on the Jetour X90?

Here are the steps to reset the maintenance light on the Jetour X90: 1. Turn off the ignition switch and hold down the mode switch. 2. Turn on the ignition switch and then release the mode switch. 3. Within 30 seconds, simultaneously press the mode switch and the clock switch (press time < 2s), and the maintenance light will be reset. Here are the reasons why the engine maintenance light may illuminate on the Jetour X90: 1. Carbon deposits in the intake tract or on the piston top can cause poor atomization, leading to incomplete combustion and triggering the pollution light. 2. Faults in the sensor or the computer board itself can cause the pollution light to illuminate.
14
2
Share

What are the power specifications of the Lynk & Co 03+?

The Lynk & Co 03+ is equipped with a 2.0T turbocharged engine. The 03+ features a high-power version of the 2.0T turbocharged engine, which delivers a maximum power output of 187kW. As the first high-performance model launched by Lynk & Co, the 03+ boasts a maximum torque of 350Nm, paired with an 8-speed automatic transmission that matches the engine perfectly. Additional Information: While pursuing speed and handling, the Lynk & Co 03+ also provides enhanced safety protection. It comes with globally leading active and passive safety systems and utilizes BorgWarner's fifth-generation intelligent sports all-wheel-drive system to ensure vehicle stability.
1
0
Share

Which Lights to Use in Heavy Fog?

In heavy fog, you should turn on the fog lights. If visibility is extremely low, you should also activate the hazard warning flashers. Driving in foggy conditions significantly reduces visibility and limits the driver's line of sight. Fog lights have strong light penetration, which can enhance visibility for both the driver and other road users, allowing approaching vehicles and pedestrians to spot each other from a greater distance. Fog lights are divided into front fog lights and rear fog lights. Front fog lights are typically a bright yellow color, while rear fog lights are red. The symbol for front fog lights features downward light beams, whereas the rear fog light symbol shows parallel beams. In foggy weather, both front and rear fog lights are usually used together. Fog lights are highly bright and penetrating, and they do not cause diffuse reflection due to fog. Therefore, using them correctly can effectively prevent accidents.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.