What is the replacement method for the fuel tank cap motor of the Audi A6?
2 Answers
Audi A6 fuel tank cap motor replacement method is: 1. Open the fuel tank cap, insert 4 small flat-head screwdrivers or other disassembly tools into the four unopened notches around it, and pry simultaneously; 2. Use a Phillips screwdriver to remove the two screws securing the motor; 3. Use a flat-head screwdriver to pry open the housing where the motor is placed; 4. Replace the fuel tank cap motor. Taking the 2020 Audi A6 as an example, it is a mid-to-large-sized car with body dimensions of: length 4951mm, width 1886mm, height 1483mm, wheelbase 2925mm, minimum ground clearance 190mm, and body weight 1885kg.
I usually enjoy fixing my own car, and replacing the fuel filler flap motor on an Audi A6 is quite straightforward. First, check the symptoms: if the flap doesn’t open or opens slowly, it’s likely the motor is faulty. Prepare a screwdriver and wrench, park on level ground, and open the trunk lid. On the fuel filler side, carefully pry off the interior trim panel, usually secured with plastic clips. Locate the small motor connected to the wiring and the flap mechanism. Disconnect the wiring harness, remove the mounting screws or clips, and take out the old motor. Purchase a new matching motor, install it, and reconnect the wiring. Reattach the trim panel, close the trunk lid, and test the flap a few times to ensure smooth operation. The whole process takes about half an hour, using common household tools, saving hundreds in repair costs. However, beginners should first watch Audi owner forum video tutorials to avoid mistakes and check the wiring to prevent short circuits.
