What is the replacement interval for the Honda City's spark plugs?

2 Answers
OJameson
07/28/25 10:37pm
The replacement interval for the Honda City's spark plugs is approximately 100,000 kilometers. The better the material of the spark plugs, the longer their service life. When selecting the spark plug model, it must match the engine type. Taking the 2019 Honda City as an example, it is a compact car with the following dimensions: length 4450mm, width 1695mm, height 1477mm, wheelbase 2600mm, and a fuel tank capacity of 40 liters. The 2019 Honda City features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 131 PS, a maximum power of 96 kW, and a maximum torque of 155 Nm, paired with a 5-speed manual transmission.
Was this review help?
9
3
Share
DelAnna
08/12/25 3:06am
The replacement interval for the City's spark plugs generally ranges between 60,000 to 100,000 kilometers, depending on the model year and spark plug material. Conventional copper-core plugs typically require replacement around 60,000 km, while iridium or platinum plugs can last approximately 80,000 to 100,000 km. I've encountered many owners seeking advice—this detail is often overlooked until symptoms like hard starting or sluggish acceleration appear. I recommend consulting your owner's manual for manufacturer-specific guidance, as factory standards are most reliable. Don't underestimate spark plug issues: delayed replacement of worn plugs causes engine instability, surging fuel consumption, excessive emissions, and potential damage to the downstream catalytic converter, leading to costly repairs. For preventive maintenance, conduct a diagnostic check every 40,000 km using an OBD scanner to monitor ignition system performance and maintain optimal vehicle condition.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

What is the displacement of the Sagitar?

The Sagitar comes with three displacement options: 1.4T, 1.6T, and 1.8T. Here is some related information about car displacement: Introduction to car displacement: The space volume that a piston moves from top dead center to bottom dead center is called the cylinder displacement. If an engine has multiple cylinders, the sum of the working volumes of all cylinders is called the engine displacement, which is generally expressed in liters (L). Engine displacement is one of the most important structural parameters, as it represents the size of the engine more accurately than the bore and the number of cylinders. Many performance indicators of the engine are closely related to the displacement. Displacement classification: In China, the classification of passenger cars is determined by the size of the displacement. Mini cars have a displacement of ≤1.0L; compact cars have a displacement ranging from 1.0L to 1.6L; mid-size cars have a displacement ranging from 1.6L to 2.5L; executive cars have a displacement ranging from 2.5L to 4.0L; and luxury cars have a displacement of >4.0L.
7
3
Share

What does fault code C0074 mean?

C0074 fault code applies to all automobile manufacturers, meaning requested driving torque. More relevant information is as follows: 1. This fault code is related to the torque management of the Traction Control System (TCS). If the system detects rear wheel slippage, the Electronic Brake Control Module (EBCM) will request the Powertrain Control Module (PCM) to reduce torque. There are two wires between the EBCM and PCM. One is responsible for sending the requested torque from the EBCM to the PCM, and the other sends the delivered torque from the PCM back to the EBCM. 2. After troubleshooting the vehicle, the fault code must be cleared. When clearing the code, it is essential to strictly follow the specific vehicle's prescribed fault code clearing method. Under no circumstances should the negative ground cable be disconnected to clear the fault code. Otherwise, it may cause the following two issues: First, it can lead to the loss of normal records in the control center computer of some vehicle models. Many car owners are aware that most vehicle central computers have a memory function. If the negative battery cable is disconnected, it will automatically clear the engine operation experience data stored in the Random Access Memory (RAM). Second, it may also result in the loss of certain functions, such as frequently losing the audio lock feature.
19
1
Share

How to Remove and Install the Rearview Mirror of Dongfeng Fengguang S560?

The method for removing the rearview mirror of Dongfeng Fengguang S560 is as follows: To disassemble the rearview mirror of Fengguang S560, first use a flat-head screwdriver to remove the door trim panel, then unscrew the bolts fixing the rearview mirror, and disconnect the wiring harness of the rearview mirror. This way, the rearview mirror can be removed. Be careful to proceed slowly during the disassembly process to avoid damaging the rearview mirror. Rearview mirror adjustment methods: 1. Adjust the center rearview mirror: The center rearview mirror can effectively control the distance. Adjust the left and right positions so that the left edge of the mirror just cuts off the right ear of your image in the mirror. Under normal driving conditions, you should not see yourself in the center rearview mirror. When adjusting the up and down positions, place the distant horizon in the center of the mirror. 2. Adjust the left rearview mirror: When adjusting the left rearview mirror up and down, place the distant horizon in the center. Adjust the left and right positions so that the body occupies 1/4 of the mirror's area. When adjusting the left rearview mirror, determine the horizontal line, place it in the center of the rearview mirror, and then adjust the area of the body in the rearview mirror.
7
1
Share

What Are the Causes of Increased Tire Pressure?

Tire pressure increase is mainly caused by the following reasons: 1. Over-inflation of the tire; 2. Hot weather causing gas expansion and resulting in higher pressure; 3. Prolonged operation generating heat through friction, leading to increased tire pressure. Strictly speaking, tire pressure refers to the internal air pressure of the tire. Tire pressure is equivalent to the blood pressure of a car. The level of tire pressure plays a crucial role in the performance and power of the vehicle. Excessive tire pressure reduces the friction and adhesion of the tire, affecting braking performance and the lifespan of the tire. Over-inflation also decreases the tire's resistance to punctures, making it more prone to blowouts. It accelerates localized wear on the central tread pattern, shortening the tire's lifespan and increasing body vibration, which indirectly affects the longevity of other components. Excessive tire pressure can also cause overstretching and deformation of the tire cords, reducing the elasticity of the tire body, increasing the load on the vehicle, and decreasing rolling resistance.
19
0
Share

Which Jaguar model is referred to as the 'Little Leopard'?

F-TYPE is the wildest and most pedigreed 'Little Leopard'. Exterior Design: The F-TYPE exhibits significant changes in its exterior design. It replaces the vertical headlights of previous models with horizontal ones, featuring a more slender shape that gives it a sharper gaze. Additionally, its grille and air intakes have been enlarged, enhancing the front fascia's sporty and aggressive appearance. Viewed from the side and rear, the F-TYPE retains its classic proportions and tail design. The elongated hood and elegant haunch lines embody the Jaguar's signature allure—sensual yet powerfully poised. Interior Design: Interior updates are minimal, maintaining the driver-focused cockpit layout with a center console angled toward the driver for optimal ergonomics. Powertrain: Under the hood, the F-TYPE offers either an Ingenium 2.0T four-cylinder turbocharged engine or a 3.0T V6 supercharged unit. The former delivers 300 horsepower and 400 N·m of torque, while the latter produces 380 horsepower and 460 N·m. Both are paired with an 8-speed Quickshift automatic transmission.
19
5
Share

What Conditions Can Cause a Car to Pull to One Side?

Uneven tread patterns or differing tread depths on the two sides; unequal tire pressure on both sides; deformation of the front shock absorber springs leading to inconsistent cushioning on both sides—all these can cause a car to pull to one side. More detailed information is as follows: 1. When driving with the steering wheel held steady, the car should generally move in a straight line under normal conditions (note that road conditions must be considered—ensure the road surface is level, as rural roads and typical urban roads are often uneven, which can affect the car's trajectory). If the car deviates to the left or right, this is referred to as a pulling phenomenon. Typically, a car driving 1000 meters on a flat, straight road should have a deviation within four to five meters. Exceeding this range indicates a pulling issue. It is crucial to visit a repair shop for a comprehensive inspection immediately to prevent various dangerous situations caused by pulling, as the consequences cannot be ignored. 2. The hazards of car pulling: Minor pulling can lead to uneven tire wear or tire failure, while severe cases may cause tire blowouts or loss of vehicle control. Although pulling does not immediately disable the car, long-term pulling can create multiple safety hazards. Directional pulling while driving is relatively common, and if not addressed promptly, it can be dangerous. Generally, a four-wheel alignment can resolve the issue.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.