···
Log in / Register

What is the replacement interval for coolant?

1 Answers
DiJoel
07/29/25 9:05pm

The replacement interval for coolant is generally every 2 years or approximately 60,000 kilometers. Functions of coolant: When parking in cold winter, it prevents the coolant from freezing and cracking the radiator or damaging the engine cylinder block or head. In high summer temperatures, it effectively prevents boiling and avoids overheating. Coolant provides freeze protection in winter, boil protection in summer, and year-round protection against scale and corrosion, ensuring the engine operates within the normal temperature range. Checking coolant level: To check if the car's coolant level is sufficient, observe the MIN and MAX marks on the car's radiator. The coolant level should remain between the MAX and MIN marks for normal operation - neither too much nor too little. If the level is below MIN, it indicates insufficient coolant and requires topping up.

Was this review help?
7
1
Share
More Forum Discussions

How to Replace the Air Conditioning Filter in the Second-Generation Eado?

The steps to replace the air conditioning filter in the second-generation Eado are as follows: 1. Open the glove box cover. 2. Locate the fixing clips and pull them outward with force. 3. Squeeze both sides of the glove box towards the center with both hands, then remove the glove box to reveal the air conditioning filter cover. 4. Press firmly on the fixing clips on both sides of the cover to remove it. 5. Pull out the old air conditioning filter and replace it with a new one. 6. Reassemble in the reverse order of disassembly. Additional information about the air conditioning filter: 1. There are two types of air conditioning filters: one without activated carbon and another with activated carbon. 2. The air conditioning filter should generally be replaced every 10,000 kilometers.
12
5
Share

What is the standard flash point for diesel?

Diesel fuel has a flash point above 55°C (national standard). Below is an introduction to related content: 1. Flash point introduction: The flash point is an indicator of diesel evaporation and safety performance. If the flash point is too low, it indicates that the diesel is mixed with a small amount of light oil, which can cause rough engine operation and pose significant safety hazards during diesel storage, transportation, use, and after traffic accidents. Therefore, the national standard strictly stipulates that the flash point must be >55°C. 2. Types of flash points: The open flash point is the result measured using a specified open flash point tester and is expressed in °C. It is commonly used to test lubricating oils. The closed flash point is the result measured using a specified closed flash point tester and is expressed in °C. It is commonly used to test kerosene, diesel, transformer oil, etc.
4
1
Share

What causes idle vibration in the Volkswagen EA211 engine?

Volkswagen EA211 engine idle vibration may be caused by: 1. Fuel system failure, such as injector closing improperly or clogging due to excessive internal carbon deposits; 2. Severe carbon buildup on the engine throttle; 3. Mechanical engine failure, such as uneven cylinder pressure among cylinders; 4. Intake system failure, such as air intake pipe leakage. The Volkswagen EA211 engine is a new type of automotive engine under the Volkswagen brand, developed based on the Volkswagen MQB transverse modular platform. It incorporates an ACT active cylinder management system, which can shut down two cylinders under certain conditions and operate with only the other two cylinders. It also reverts to a timing belt configuration, reducing internal engine power consumption and noise.
18
4
Share

What is the difference between high and low power versions of Volkswagen's 2.0T engine?

The difference between the high and low power versions of Volkswagen's 2.0T engine lies in the engine tuning for power and torque. Below are the relevant details: 1. There is no difference in engine hardware; different performance levels are achieved by adjusting ECU data, combined with variations in vehicle configuration, to position the vehicle differently. 2. Since turbocharged engines can control the turbocharger via the ECU to achieve different boost pressures, it is relatively simple to reduce power by lowering the boost pressure. Typically, such engines are designed for high power, and reducing power does not affect reliability. 3. The engine undergoes specific hardware optimizations based on the vehicle's high or low power requirements, resulting in significant hardware differences. Generally, high-power engines focus on performance optimization, while low-power engines prioritize fuel efficiency and cost.
4
5
Share

How to Turn Off the Rearview Mirror Light in a Mercedes-Benz?

Mercedes-Benz cars have the rearview mirror light control located in front of the sunroof. Press the light button to turn it off. Below are the relevant details: 1. Vehicle configuration: The headlights control 84 LED light sources on each side in E-Class and S-Class models, featuring multi-beam LED headlights that avoid dazzling oncoming traffic or pedestrians while providing maximum brightness. 2. The central display measures 10.25 inches as a high-definition widescreen, while the driver-facing 12.3-inch widescreen displays essential information. The controller for these two monitors remains conveniently attached to the steering wheel, enhancing operability. 3. The instrument panel layout is clear, with the comprehensive information display positioned between the speedometer and tachometer. Adjustable via buttons on the multifunction steering wheel, it allows for easy operation and personalized settings. The new seat design, tailored to different C-Class models, ensures comfort.
15
0
Share

What brand is the Ninja motorcycle?

Ninja is a motorcycle from the Kawasaki brand. It adopts high-performance models such as supersport bikes, equipped with dual throttle valves. By meticulously managing the amount of intake air, it achieves a natural linear response across the entire rev range, which helps improve combustion efficiency and thus enhances performance. Motorcycles are gasoline-powered vehicles with two or three wheels, steered by handlebars that control the front wheel. They are characterized by being lightweight, agile, and fast, widely used for patrols, passenger and cargo transport, etc. Broadly speaking, motorcycles are categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.