What is the replacement cycle for new car tires?

1 Answers
MacNoah
07/30/25 9:51am
New car tires typically need to be replaced every 3 to 5 years or after driving approximately 60,000 to 80,000 kilometers. The longer tires are used, the higher the risk of tread deformation and blowouts. The functions of tires include: 1. Transmitting driving force, braking force, and steering force to enable vehicle operation; 2. Supporting vehicle load; 3. Reducing and absorbing vibrations and impacts during driving, preventing severe vibrations from damaging car components. Tire maintenance methods include: 1. Regularly removing stones stuck in tire treads; 2. Minimizing exposure to direct sunlight; 3. Promptly checking tire pressure; 4. Paying attention to suspension maintenance; 5. Periodically inspecting front wheel alignment; 6. Adopting careful driving habits by choosing smooth road surfaces, avoiding objects that could puncture or scratch tires, and steering clear of chemical spills that may corrode tires.
Was this review help?
16
2
Share
More Forum Discussions

What material is the clutch pressure plate made of?

The clutch pressure plate is made of gray cast iron HT200, which has a pearlitic microstructure with a hardness of HB170 to 227. Additionally, a small amount of metal elements can be added to enhance its mechanical strength. The clutch pressure plate is an important component of the clutch system and plays a crucial role in vehicle driving safety. The functions of the clutch include: 1. Gradually increasing the driving force of the vehicle to ensure smooth starting; 2. Temporarily separating the engine and transmission for gear shifting; 3. Preventing overload of the transmission system; 4. Reducing torsional vibration shocks from the engine and extending the service life of transmission gears.
5
2
Share

Is the 1.5L engine of Mazda 3 Axela powerful enough?

Mazda 3 Axela's 1.5L engine is sufficient for daily use. It is equipped with the Skyactiv-G 1.5L engine, whose function is to convert the thermal energy of gasoline into mechanical energy by burning and expanding gas in a sealed cylinder to push the piston. Taking the 2020 Mazda 3 Axela as an example, it belongs to the compact car category with body dimensions of 4662mm in length, 1797mm in width, and 1445mm in height, a wheelbase of 2726mm, and a fuel tank capacity of 50L. The 2020 Axela features a MacPherson strut front suspension and a torsion beam rear suspension. It is powered by a naturally aspirated engine with a maximum horsepower of 117ps, a maximum power of 86kw, and a maximum torque of 148nm, paired with a 6-speed manual transmission.
18
5
Share

Can a temporary ID be used for Subject 2?

Subject 2 can be taken with a temporary ID. It's important to note that the validity period of a temporary ID is three months. An expired temporary ID cannot be used to enter the examination venue, so you should apply for a formal or temporary ID as soon as possible. Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test. The test items include: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving along a curve. Tips for controlling the clutch in Subject 2: 1. Press down quickly and lift slowly, pause slightly midway to find the contact point; 2. Maintain a gentle pressure above the contact point and smoothly engage while lifting the foot pedal.
18
4
Share

What to Do When the Car Shows Low Battery Voltage?

The solutions for low battery voltage displayed in the car are: 1. If the battery can start the engine normally, driving for a few hours will fully charge it; 2. If the battery cannot start the engine, jump-starting it and then driving for a while will restore the charge; 3. Using a battery charger to charge the battery can better replenish the power. The functions of the battery are: 1. Providing a strong current to the starter when starting the engine; 2. Assisting the generator in supplying power to electrical devices when the generator is overloaded; 3. Supplying power to electrical devices when the engine is idling; 4. Protecting the car's electrical appliances.
14
0
Share

What are the hidden functions of the Toyota RAV4 car key?

Toyota RAV4 car key hidden functions include vehicle locator, one-touch window closing, automatic trunk opening, one-touch window opening, and manual locking. Key principle: The key emits weak radio waves near the owner, which are received by the car antenna. The electronic control unit (ECU) identifies the signal code, and the system's actuator performs the unlocking or locking action. Taking the 2020 Toyota RAV4 as an example, its front suspension is a MacPherson independent suspension, the rear suspension is an E-type multi-link independent suspension, equipped with a 2.5L naturally aspirated engine, with a maximum horsepower of 178PS, maximum power of 131kW, maximum torque of 221Nm, matched with an electronic continuously variable transmission.
4
2
Share

What engine does the Borgward BX5 have?

The engines of the Borgward BX5 are: 1. 1.4T turbocharged engine; 2. 1.8T turbocharged engine; 3. 2.0T turbocharged engine. The function of the engine is: to convert the thermal energy of gasoline or diesel into mechanical energy by burning and expanding the gas in a sealed cylinder, thereby pushing the piston to perform work. Taking the 2020 Borgward BX5 as an example, it belongs to the compact SUV category, with body dimensions of: length 4490mm, width 1877mm, height 1675mm, wheelbase of 2685mm, fuel tank capacity of 60L, and curb weight of 1525kg.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.