What is the removal and installation method for the Great Wall C30 exterior rearview mirror?

1 Answers
LeAndres
07/29/25 3:22am
The removal and installation method for the Great Wall C30 exterior rearview mirror is as follows: 1. For removal, pinch the cylinder behind the rearview mirror and rotate it counterclockwise by 45 degrees to detach; 2. For installation, align the rearview mirror position and rotate it clockwise by 90 degrees to secure. Taking the 2016 Great Wall C30 as an example, its body dimensions are: length 4471mm, width 1705mm, height 1480mm, wheelbase 2646mm, fuel tank capacity 40l, and trunk capacity 510l. The 2016 Great Wall C30 is equipped with a 1.5l naturally aspirated engine, delivering a maximum horsepower of 106ps, maximum power of 78kw, maximum torque of 138nm, and is paired with a 5-speed manual transmission.
Was this review help?
12
2
Share
More Forum Discussions

Can a Car Be Driven After Being Submerged in Water?

It is advised not to drive or use a car after it has been submerged in water. It must be inspected and repaired before use. If the vehicle is submerged while stationary, the engine is generally not damaged. However, attempting to start and drive the vehicle out of the submerged area may cause engine damage. Vehicle Water Submersion Inspection and Repair: Engine Inspection: Check whether the engine cylinders have taken in water, as water ingress can bend the connecting rods and damage the engine. If it is determined that water has entered the engine, the spark plugs should be removed first to manually cut off the fuel supply and ignition systems. Then, use an electric motor to rotate the engine, allowing the water inside to be expelled. Check the fluids in various systems: Inspect the condition of the fluids in the vehicle's systems to prevent foaming, cloudiness, or other signs of fluid deterioration due to water ingress, which can lead to loss of lubrication. Additionally, water may carry sand particles, causing excessive engine wear. In such cases, the relevant components should be cleaned promptly, and the affected fluids should be replaced. Remove interior items: If the water level rises above the doors, water is likely to enter the cabin. Rainwater is not clean and contains many impurities. The post-submersion car interior becomes a highly humid greenhouse environment, ideal for mold growth. If the vehicle is not dried in time, mold spots can damage the fabric and leather materials inside the car.
19
3
Share

What does 2.0e mean in cars?

The 2.0 in car 2.0e represents the engine displacement of 2.0 liters, while the e denotes different car models. Car maintenance items include: 1. Engine oil; 2. Oil filter; 3. Transmission oil; 4. Spark plugs; 5. Cabin air filter; 6. Air filter; 7. Fuel filter; 8. Brake fluid. The functions of car maintenance are: 1. Keeping the car clean and tidy; 2. Ensuring normal technical conditions; 3. Eliminating hidden dangers and preventing faults; 4. Slowing down the deterioration process and extending the service life. Precautions for car maintenance include: 1. Taking care of the car body; 2. Cleaning the engine promptly and applying maintenance wax after cleaning; 3. Disinfecting the interior; 4. Protecting the windshield wipers.
16
3
Share

How long do I have to replace a lost driver's license?

After losing a motor vehicle driver's license, you can apply for a replacement at any time as long as it is within the validity period of the license. Simply prepare the required materials and submit a replacement application at the vehicle management office. Below are the specific details for replacing a driver's license: Required Materials: To replace a motor vehicle driver's license, you need to bring the following materials: the 'Motor Vehicle Driver's License Application Form,' the identity proof of the driver, and a written statement declaring the loss of the driver's license. Application Location: Apply for a replacement at the vehicle management office where the driver's license was originally issued or at another vehicle management office outside the original jurisdiction. Processing Time: For eligible drivers, the vehicle management office should issue a replacement driver's license within one day. Replacement Notes: After a motor vehicle driver obtains a replacement driver's license, the original license becomes invalid and must not be used. During the period when a driver's license is legally seized, detained, or temporarily suspended, the driver is not allowed to apply for a replacement.
17
4
Share

What does the 'stop' indicator on the car dashboard mean?

It is a mandatory stop warning light, which typically illuminates simultaneously with other warning lights such as low engine oil pressure, low brake fluid level, or high coolant temperature. When this light appears, the engine must be stopped immediately. This warning light is interconnected with the 'engine oil pressure', 'low brake fluid level', 'coolant temperature gauge', and 'electronic brake force distribution system failure' warning lights. Details about the STOP indicator on the dashboard: 1. Description one: The STOP light is not an independent indicator; there are also other warning lights on the dashboard including coolant temperature, oil pressure, air pressure, engine, and cab indicators. 2. Description two: The STOP light will illuminate when any component malfunctions. For example, if the engine coolant temperature becomes excessively high during driving, the coolant warning light will come on, and the STOP light will also illuminate to indicate an engine fault. 3. Description three: There is also a yellow light on the dashboard, while the STOP light is red. A yellow light indicates a general fault, whereas a red light signifies a severe fault.
19
2
Share

What are the three-piece set for cars?

Car three-piece set refers to the two front seat cushions and one rear seat long cushion in the car. The function of car three-piece set Choosing car three-piece set focuses on aesthetics, car maintenance, and durability. It prevents the car from getting dirty during driving. Car three-piece set is indispensable in car maintenance. To ensure the long-term use of your beloved car, it is essential to learn more about car maintenance knowledge, achieving maximum car maintenance function with minimal cost. Using car three-piece set can reduce wear and tear in these areas, prolong the car's service life, and make driving safer and more reliable. Classification of car seat cushions: Car seat cushions are divided into four types: three-piece set, five-piece set, eight-piece set, and nine-piece set. The three-piece set refers to the cushions for the two front seats plus the long cushion for the rear seat. The five-piece set adds the backrests of the two front seats to the three-piece set. The eight-piece set adds the backrest of the rear seat to the five-piece set. The nine-piece set includes two front pieces, two rear backrest pieces, one long cushion, two headrests, and two lumbar pillows.
16
3
Share

What Causes Gear Noise When Shifting into Reverse?

Gear noise when shifting into reverse occurs because there is no synchronizer. During the brief moment when the clutch is depressed, the inertia causes the internal gears of the transmission to spin freely. Additional details are as follows: Common causes of gear noise: Reverse gear lacks a synchronizer. Synchronizers help gears engage smoothly when shifting while driving. Some vehicles without synchronizers may produce noise when shifting into reverse. The most direct sign of a damaged reverse gear is noise while driving in reverse. Experienced drivers who shift quickly may encounter noise if they shift before the vehicle comes to a complete stop or if the clutch isn't fully depressed. Some vehicles with added floor mats or liners may prevent the clutch from being fully depressed, leading to shifting noise. Solutions for gear noise: Shift only after the vehicle has come to a complete stop. Shifting into reverse before the vehicle fully stops can severely damage the transmission and cause gear noise. Therefore, when shifting into reverse, ensure the vehicle is fully stopped by firmly pressing the brake. Fully depress the clutch when shifting. Never shift into reverse when the clutch is only partially engaged, as this can also cause gear noise. Additionally, shift into reverse gently—avoid excessive force to prevent gear clashing sounds. Lastly, avoid reversing at high speeds and refrain from accelerating while in reverse.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.