What is the remote start distance in meters?

1 Answers
EmilianoFitz
07/29/25 4:07pm
The remote start distance for the 2021 CR-V is 10 meters. Remote start refers to starting the engine remotely using the key fob. The principle is quite simple: the vehicle starts the engine based on the signal received from the remote key. The remote start function has some limitations on the vehicle itself, the most important being that it can only be installed in automatic transmission models. CR-V remote start operation method: First press the lock button, then hold the HOLD button. When you see the turn signals flash six times consecutively, it indicates that the engine has been successfully started remotely. The air conditioning will automatically turn on with the internal circulation activated, adjusting the interior temperature based on the external temperature. A distance of 30 meters is no problem. Precautions for using CR-V remote start: When using it, note that the preheating time should not exceed the manufacturer's limit of 10 minutes, and the number of uses should not exceed two. This is because the engine warms up much more slowly when idling in place compared to normal driving, and the three-way catalytic converter takes a long time to reach its working temperature of above 350 degrees. During this time, the exhaust gases produced by incomplete combustion place a heavy burden on the catalytic converter, which can damage it over time.
Was this review help?
6
5
Share
More Forum Discussions

What are the key points of Subject 2?

Key points for the driving test Subject 2: Maintain a good mindset; Grasp the key points; Develop good habits; Execute the final step well. The key techniques to practice for Subject 2 include the following: 1. Curve driving: The vehicle enters from one end of the S-shaped lane and exits from the other end without pressing the line. After entering the S-shaped route, control the speed as much as possible, neither too fast nor too slow. Drive along the protruding arc trend of the S-shaped route. After passing one arc, find the next arc and drive slowly to pass. 2. Right-angle turn: First, adjust the vehicle to be about 30 cm away from the right side line, then drive straight. Next, when the lower edge of the left rearview mirror (reversing mirror) aligns with the vertical edge line of the vehicle body, turn the steering wheel tightly. After the mirror angle turns, return to normal driving. 3. Parallel parking: First, at the right starting point, reverse the car into a marked line in a semi-clutch state, then drive the car out to the left starting point. Then reverse the car into the marked line. The technique for this is to find reference points. During the test, turn the steering wheel fully at a reference point. If you are afraid of errors, you can adjust the steering direction, so you can see the marked lines on both sides through the rearview mirror while reversing; when adjusting the direction, slightly turn the steering wheel towards the side with the smaller distance.
7
5
Share

What is the process for adding two driver's licenses in 123123?

Open the software and click on the "Driver's License" option at the top of the software. Make sure to log in with the correct account. You must first bind the driver's license before you can bind the vehicle. Fill in the file number to bind the driver's license. Note that you need to bind the driver's license first. Click on the "Vehicle" option at the top of the main interface to enter the vehicle binding page, then input the vehicle number you wish to bind.
20
3
Share

Is the Ferrari 458 turbocharged?

Ferrari 458 is not turbocharged, it uses a 4.5L naturally aspirated engine. Taking the 2014 Ferrari 458 as an example, it belongs to the sports car category with the following dimensions: length 4571mm, width 1951mm, height 1203mm, wheelbase 2650mm, fuel tank capacity 86L, and curb weight 1395kg. The 2014 Ferrari 458 features double wishbone front suspension and multi-link independent rear suspension, with maximum horsepower of 605PS, maximum power of 445kW, maximum torque of 540Nm, matched with a 7-speed dual-clutch transmission.
11
2
Share

Where is the car air conditioning air intake located?

Car air conditioning air intake is located under the front windshield in the engine compartment. The functions of car air conditioning are: 1. Achieving cooling effect through continuous refrigerant circulation; 2. Drawing fresh outside air into the car for ventilation and air exchange, preventing window fogging; 3. Using engine coolant, waste heat, or burner combustion to generate heat as a heating source, which is then warmed by the heater and blown into the car by the blower to raise temperature for heating effect; 4. Removing dust, odors, smoke, and toxic gases from the car air to freshen the air, and humidifying the car air to increase relative humidity.
19
3
Share

How to Check Tire Pressure on Golf 7?

Golf 7 does not have a direct tire pressure monitoring system, so it does not display specific tire pressure values. The Golf 7 tire pressure monitoring indicator uses ABS sensors to compare the rolling circumference and rotation speed of each wheel. If the tire pressure of one or more wheels changes, the tire pressure loss indicator on the instrument cluster and the infotainment system display will issue a warning. Taking the 2021 Golf 7 as an example, it is a compact car with the following dimensions: length 4296mm, width 1788mm, height 1471mm, wheelbase 2636mm, fuel tank capacity 51L, and curb weight 1310kg.
5
3
Share

How to reset the maintenance light on the Great Wall M4?

The method to reset the maintenance light on the Great Wall M4 is: 1. Turn off the ignition switch of the Great Wall M4; 2. Press and hold the single trip meter reset button on the dashboard of the Great Wall M4; 3. Turn on the ignition switch, and the odometer will start counting down. When the display shows 0000.0, immediately release the button to reset the maintenance light. The Great Wall M4 features a front suspension of MacPherson independent suspension and a rear suspension of longitudinal trailing arm semi-independent suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 106 PS, a maximum power of 78 kW, and a maximum torque of 138 Nm, paired with a 6-speed sequential transmission.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.