What is the relationship between gears and speed?

1 Answers
StDeclan
07/29/25 5:49pm
1st gear is used for starting; 2nd gear corresponds to a speed of 5-20km/h; 3rd gear corresponds to 20-40km/h; 4th gear corresponds to 40-60km/h; 5th gear corresponds to 60-100km/h, or the maximum speed. Relevant information about manual transmission cars is as follows: 1. Introduction: A car that uses a manual shift mechanical transmission (also known as manual transmission, MT) to adjust speed. That is, the gear shift lever must be manually moved to change the gear meshing position inside the transmission, thereby altering the gear ratio to achieve speed change. The gear shift lever can only be moved when the clutch is depressed. 2. Composition: By switching different gear sets, gear changes are achieved. As a key component in distributing power, the transmission must have two major parts: the power input shaft and the output shaft, plus the gears that make up the transmission, which are the most basic components of a manual transmission.
Was this review help?
1
4
Share
More Forum Discussions

What does the 12345 gear in a car mean?

Car 12345 gears refer to the forward gears. Car gears are divided into forward gears and reverse gear. 12345 are forward gears, which are used when the vehicle is moving forward normally. Gear 1 is used when starting, and sometimes gear 2 is also used for starting. Gears 1 and 2 provide more power but slower speed, while gears 3, 4, and 5 are used as the vehicle speed increases - higher gears correspond to faster speeds. The reverse gear is used when the vehicle is moving backward. Below is an extended introduction: Gear shifting introduction: The driver achieves the operation process of continuously changing the gear lever position according to road conditions and vehicle speed changes through various psychological and physiological movements. In long-term driving practice, this term has become popular due to its concise and direct name. It is used very frequently. Moreover, the proficiency in operation (especially for manual transmission cars) directly affects driving safety.
4
1
Share

Where is the Auto Start-Stop Button on the Panamera?

Porsche Panamera uses an electronic key, which is an electronic screen. There is an electronic screen on the left side of the driver's seat. Open the screen and press it twice. Below is some relevant information about the Panamera: 1. Panamera Interior: The cabin atmosphere is centered around four-seat sports bucket seats, allowing passengers in any seat of the Porsche Panamera 4S to experience the strong sports car style of the Porsche brand. Like the user-customized designs adopted by today's top luxury brands, the Porsche Panamera 4S also offers a rich selection of interior decoration combinations to create various cabin styles. 2. Porsche: Porsche, a world-renowned luxury car brand under Volkswagen Group, is headquartered in Stuttgart, Germany, and is one of the main representatives of European and American cars. Main models include 911, 718, Boxster, Cayman, Panamera, Cayenne, and Macan.
11
5
Share

Should the reversing camera be installed at a 4S shop or outside?

Installing a reversing camera at a 4S shop may void the warranty on the vehicle's wiring, so it is better to have it installed outside. Below is relevant information: 1. Definition: A reversing camera, also known as a parking assist system, reversing visual system, or onboard monitoring system, is widely used in various large, medium, and small vehicles for reversing or driving safety assistance. This system provides a clear and intuitive view of the rear of the vehicle when reversing, making it one of the most practical configurations for reversing safety. 2. Technology used: Professional vehicle-mounted probes have further improved anti-magnetic, anti-shock, waterproof, and dustproof performance. The onboard display uses TFT true color, with anti-magnetic treatment to eliminate signal interference and flickering. It can simultaneously receive two video inputs, play VCD and DVD without a decoder, and features automatic horizontal switching and automatic on/off functions for reversing visuals.
18
1
Share

What causes the power output limitation in Chery Ant?

Chery Ant's power output limitation may occur due to the following reasons: 1. Causes: Overheating or overcooling of the power battery will limit the power output, which is a protective measure. This is acceptable in extreme weather conditions and does not indicate a defect in the battery temperature control system. However, if the voltage difference between individual battery cells exceeds 200mv, a "small turtle" warning will appear. This is also a protective measure, but it indicates a problem that needs to be addressed. It is recommended to visit a 4S store to apply for replacement of either low-voltage or high-voltage battery cells. 2. Comparison: The appearance of the "small turtle" warning is not unique to the 726 model; it also occurs frequently in the 729 model. It has been observed in the 151 and 251 series as well, though it is more common in the 726 model. Moreover, it tends to appear shortly after use, clearly indicating poor consistency in the Jiewei batteries, likely due to inadequate grouping and capacity determination during production.
12
2
Share

Will Insurance Companies Compensate for Water-Damaged Vehicles in Zhengzhou?

The following is an introduction to the compensation situation for water-damaged vehicles in Zhengzhou by insurance companies: 1. If the vehicle is parked and gets flooded, the insurance company will fully compensate if the vehicle has comprehensive insurance. 2. If the vehicle is flooded while driving, this involves whether the vehicle has flood insurance and comprehensive insurance. If insured, the insurance company will fully compensate. 3. If the vehicle is flooded while driving and there is a secondary ignition after the vehicle stalls, it will not be covered by insurance. 4. If the vehicle does not have comprehensive insurance, the insurance company will not compensate, and the owner will need to pay for repairs after the vehicle is flooded. Additional information: The following are the scenarios covered by flood insurance: 1. The vehicle is flooded while driving due to natural disasters such as heavy rain or waterlogging. 2. The vehicle accidentally falls into water. 3. The vehicle is flooded while parked in a parking lot or underground garage.
3
3
Share

How often should the engine oil be changed during the break-in period of the Haojue USR125?

During the break-in period of the Haojue USR125, the first engine oil change can be done between 500 to 1,000 kilometers. After the 1,000-kilometer break-in period, the engine oil should be changed every 2,000 kilometers, and the air filter should be cleaned or replaced at the same time. Below are three characteristics of a new car during the break-in period: 1. More driving faults: Due to factors such as improper assembly of parts, new cars tend to experience more driving faults during the break-in period. 2. Higher fuel consumption: To ensure the new car operates under light load during the break-in period, carburetor cars are equipped with speed limiters, which can easily cause the air-fuel mixture to become too rich, thereby increasing fuel consumption. 3. Engine oil is prone to deterioration: During the break-in period, the rough surfaces of parts and the small gaps between them can cause the engine oil temperature to rise. Additionally, many metal shavings are worn off and fall into the engine oil, making it more susceptible to oxidation and deterioration.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.