What is the registration process for a National IV motorcycle?

1 Answers
CollinFitz
07/29/25 1:42pm
The registration process for a National IV motorcycle involves driving the motorcycle to the vehicle management office, obtaining and filling out the motorcycle pass application form, submitting it for review at the counter, and waiting for the license plate to be issued upon approval. Below are the specific details for motorcycle registration: 1. Purchase tax: The purchase tax for motorcycles applies the same rate as for cars, calculated at 10%. Purchase tax = vehicle price ÷ (1+17%) × purchase tax rate; for imported new vehicles, the taxable price is calculated as the customs duty-paid price + customs duty + consumption tax. 2. Required documents: To register a motorcycle, you will need the buyer's ID card, purchase invoice, certificate of conformity, and vehicle consistency certificate.
Was this review help?
12
1
Share
More Forum Discussions

How to Defog the Mercedes-Benz GLC on Rainy Days?

The defogging function button is located in the central control area of the Magotan. When the temperature inside the car is higher than the outside temperature and the car glass is cold, water vapor will condense from a gaseous state to a liquid state. The system draws air from outside the car and directs it towards the front windshield, while the air recirculation mode is automatically turned off.
20
4
Share

How to use cruise control on Mercedes-Benz A200L?

Push the cruise control button downward in the direction indicated by "—SET" to set the current speed as the cruising speed. Press the button with the cruise control symbol to activate the cruise control, and the corresponding indicator will be displayed on the instrument panel information window. The cruise control will be immediately deactivated when the brake pedal is pressed, but pressing the accelerator pedal will not affect it.
1
0
Share

How to Stop a Continuously Sounding Honda Alarm?

When the door lock is disabled, the alarm will sound. If this happens to your car, use the key to open the driver or passenger door. To stop the alarm, remove the fuse of the alarm. It is generally located under the steering wheel, but make sure you remove the correct one to avoid mistakes.
19
3
Share

Where is the wiper switch on the Nissan Qashqai?

Nissan Qashqai's wiper switch is located on the right-hand stalk of the steering wheel. Here are some precautions for using the wipers: 1. Maintain cleanliness: When there are streak marks on the glass surface, the wiper blade may be dirty. You can sprinkle alcohol on a towel and wipe the surface of the wiper blade. Cleaning once a month can improve the performance of the wipers. 2. Check the rubber: If the wiper makes unusual noises while operating, the rubber blade may be aged or cracked. If the wear is not severe, you can sand the rough spots on the surface with sandpaper. 3. Avoid sunlight: Park the car in a shaded area where it is not exposed to sunlight, such as a garage. Summer is particularly harsh on cars. Wiper blades, being rubber products, will age faster under such conditions. 4. Refill fluid: Adding plain water directly to the windshield washer reservoir is not conducive to the maintenance of the windshield and wiper blades in the long run. To ensure the longevity of the components, always use proper windshield washer fluid. Refill the washer fluid in time to be prepared for unexpected needs.
1
0
Share

What are the causes and solutions for BMW air conditioning not cooling?

Check whether there are no bubbles visible in the sight glass when the car air conditioning is running, and no bubbles appear after the compressor stops. During normal operation of the air conditioning, if there are continuous and slow bubbles in the sight glass, it indicates insufficient refrigerant. Use your hand to twist the belt at the middle of the drive belt; it should rotate about 90°. If the rotation angle is excessive, it means the drive belt is loose and should be tightened.
20
0
Share

How to remove the fuel pump of Honda XRV?

Use a screwdriver to pry off the fuel pump cover plate. Gently pry the clip on the side of the wiring harness with a screwdriver, remove the wiring harness connector, and pull out the two fuel pipes. Use a special tool for the pump cover to remove the sealing cover ring or the so-called fuel pump cover ring. Gently lift the fuel pump assembly out of the fuel tank and place it in the prepared basin.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.