What is the recommended tire pressure range for the Verano?

1 Answers
IsabelleDella
07/30/25 1:42am
The normal tire pressure range for the Verano is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international standard GBT2978-2008. To check the current tire pressure of the Verano during daily driving, you can activate the tire pressure monitoring system, and the tire pressure values will be displayed on the central LCD screen of the instrument panel. The specific method is: press the button on the right side of the steering wheel, select the information column interface, scroll down to find the tire pressure monitoring information, and then view the specific tire pressure values. Generally speaking, a tire pressure exceeding 2.8 bar is considered too high, while a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern of the tire, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; causes excessive stretching deformation of the tire cords, reducing tire elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; causes heavy steering and deviation, posing risks to driving safety; increases movement of various parts of the tire, leading to abnormal heat generation due to excessive rolling; reduces the functionality of the cords and rubber, causing delamination or cord breakage and excessive friction with the rim, damaging the tire bead area and causing abnormal wear; multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to tire blowouts. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually triggers an alarm when below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply perform a tire pressure reset to resolve this. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it can also trigger the tire pressure warning light. For sensor damage issues, the only solution is to replace it with a new component.
Was this review help?
9
2
Share
More Forum Discussions

What to do if the engine oil in CRV increases?

Honda CRV engine oil increase solutions are as follows: 1. FI-ECU software upgrade. 2. Replace the air conditioning control unit. 3. TCU software upgrade, only for CVT models. 4. Replace the radiator lower hose assembly, only for CVT models. Here is some related information about the CRV: (1) Advantages: Fashionable and dynamic appearance, smooth lines, rounded yet sporty; improved materials and craftsmanship, good configuration, strong power, flexible handling, and relatively high cost performance. (2) Space: The overall driving space is spacious and ample, with no obvious tightness in head and legroom. The interior storage space is rich and practical, the seats are well-wrapped and comfortable, and the rear seats are slightly adjustable, making long-distance travel more practical. (3) Handling: Comfortable and flexible handling, clear gear shifts, smooth transitions, with a car-like driving feel. The throttle response is sensitive, the steering wheel feels good, but the direction is not precise enough. The wide tires have good grip, and the chassis is solid, but the ground clearance is small, resulting in poor passability. The suspension is too soft, leading to less stability at high speeds. (4) Power: Equipped with recalibrated 2.0 and 2.4 displacement engines. The 2.4 displacement engine is powerful with quick acceleration, making overtaking easy. The 2.0 displacement engine is weaker, with slower acceleration from a standstill. (5) Interior: The interior adopts Honda's family style, with a two-tone design that is warm and clean. The three-spoke steering wheel feels good, the configuration is practical, and the materials and craftsmanship have been improved. (6) Fuel consumption: The Dongfeng Honda CR-V has good fuel economy, with an average fuel consumption of about 10L per 100 kilometers.
7
0
Share

How to Apply for a Beijing Entry Permit?

Beijing entry permits can be processed at any Beijing entry inspection station or permit office. Below are the specific details about the Beijing entry permit: 1. Required documents: Photo of the driver's license homepage, photo of the vehicle registration homepage, photo of the driver's ID card, and a photo of the driver holding their ID card (front side). 2. Time limit: The Beijing entry permit is valid for 2-7 days. Applications can be made up to 4 days in advance, and it is recommended to apply early. Same-day applications for same-day use are not allowed. 3. Vehicle restrictions: Each account can apply for Beijing entry permits for a maximum of three vehicles. A driver can only hold one valid Beijing entry permit at a time. 4. Other vehicle types: Medium and large-sized vehicles are not supported for this application method.
12
3
Share

What is the horsepower of a 4100 diesel engine?

4100 represents a 4-cylinder engine with a cylinder bore of 100 millimeters. The horsepower of a 4100 diesel engine varies depending on the manufacturer. A naturally aspirated 4100 diesel engine typically has a maximum power output of around 70 horsepower, while a turbocharged 4100 diesel engine can reach approximately 130 horsepower. Additional relevant information is as follows: 1. Turbocharging technology can enhance engine power: A car's engine uses a mixture of air and fuel as its fuel source. If the amount of fuel is increased, the energy generated by each explosion will also be higher, thereby making the engine more powerful. 2. Turbocharging technology can increase engine air intake: Turbocharging technology can boost the engine's air intake without increasing displacement. After increasing the air intake, the fuel injection is correspondingly increased, which further enhances the engine's power. Turbocharged engines are equipped with a turbocharger, which consists of two parts: a compression turbine and an exhaust turbine. The compression turbine is connected to the intake manifold, while the exhaust turbine is connected to the exhaust manifold.
6
2
Share

Can the Subject Two Driving Test Be Taken in a Different Location?

Subject Two driving test can be taken in a different location. Here are the specific details about the driver's license test: 1. Laws and Regulations: According to the 12 convenience measures introduced by the Ministry of Public Security, applicants for small car driver's licenses are allowed to change the test location up to 3 times for different subjects. This means that after enrolling in a driving school, candidates have three opportunities to change the test location. 2. Transferring to a Different Location Midway: Mainland residents with a resident ID card, and residents from Hong Kong, Macau, and Taiwan with their respective residence permits can directly apply for a change of test location at the local vehicle management office where they currently reside. After the change is processed, applicants can directly schedule the remaining subject tests at their current place of residence.
13
0
Share

What does 9AT transmission mean?

9AT transmission refers to a gearbox that uses shifting components to control different combinations of planetary gears, achieving a configuration with 9 forward gears and 1 reverse gear. Here are specific details about AT transmissions: 1. Structural form: AT transmissions are automatic transmissions, some of which feature manual modes while others do not. 2. Working principle: AT transmissions are a common type of automatic gearbox containing multiple planetary gears that enable speed and torque variation. They connect to the engine via a torque converter. This type of transmission offers smooth shifting and demonstrates high reliability and durability.
12
0
Share

What is the displacement of the Honda Guandao?

Honda Guandao has a 1.5L displacement. Relevant information is as follows: 1. Power aspects: The Honda Guandao has a displacement of 1.5 liters. The Guandao is only equipped with one engine, which is a 1.5-liter turbocharged engine. The engine code for the Honda Guandao is I15bd, with a maximum power of 142kw, maximum torque of 243 Nm, maximum power speed of 5600 rpm, and maximum torque speed ranging from 2000 to 5000 rpm. 2. Configuration aspects: The Honda Guandao is equipped with a matte genuine leather seat system, featuring front seat rapid heating and ventilation, 12-way electric adjustment for the driver's seat, and other functions in Honda brand models. It also includes independent three-zone climate control for the driver, front passenger, and rear seats, with the innovative addition of air vents on the vehicle's B-pillar.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.